USPS ACS Keyline فحص الرقم
-
05-09-2019 - |
سؤال
لقد قمت بتنفيذ خوارزمية فحص "MOD 10" باستخدام SQL، لأن عنوان خدمة الخدمة البريدية الأمريكية تغيير خدمة Keyline وفقا للطريقة الموجودة في مستندها، ولكن يبدو أنني أحصل على أرقام خاطئة! لدينا سلاسل المدخلات لدينا فقط أرقام فيها، مما يجعل الحساب أسهل قليلا. عندما أقارن نتائجي مع النتائج من تطبيق الاختبار، أحصل على أرقام مختلفة. أنا لا أفهم ما يجري؟ هل يرى أي شخص أي شيء خاطئ في خوارزمي؟ يجب أن تكون شيئا واضحا ...
يمكن العثور على وثائق الطريقة في الصفحة 12-13 من هذه الوثيقة:http://www.usps.com/cpim/ftp/pubs/pub8a.pdf.
يمكن العثور على تطبيق العينة في:http://ribbs.usps.gov/acs/documents/tech_guides/keyline.exe.
يرجى ملاحظة: قمت بإصلاح التعليمات البرمجية أدناه، بناء على المساعدة من مستخدمي المنتدى. هذا هو بحيث يتمكن القراء في المستقبل من استخدام التعليمات البرمجية بالكامل.
ALTER function [dbo].[udf_create_acs] (@MasterCustomerId varchar(26))
returns varchar(30)
as
begin
--this implements the "mod 10" check digit calculation
--for the US Postal Service ACS function, from "Publication 8A"
--found at "http://www.usps.com/cpim/ftp/pubs/pub8a.pdf"
declare @result varchar(30)
declare @current_char int
declare @char_positions_odd varchar(10)
declare @char_positions_even varchar(10)
declare @total_value int
declare @check_digit varchar(1)
--These strings represent the pre-calculated values of each character
--Example: '7' in an odd position in the input becomes 14, which is 1+4=5
-- so the '7' is in position 5 in the string - zero-indexed
set @char_positions_odd = '0516273849'
set @char_positions_even = '0123456789'
set @total_value = 0
set @current_char = 1
--stepping through the string one character at a time
while (@current_char <= len(@MasterCustomerId)) begin
--this is the calculation for the character's weighted value
if (@current_char % 2 = 0) begin
--it is an even position, so just add the digit's value
set @total_value = @total_value + convert(int, substring(@MasterCustomerId, @current_char, 1))
end else begin
--it is an odd position, so add the pre-calculated value for the digit
set @total_value = @total_value + (charindex(substring(@MasterCustomerId, @current_char, 1), @char_positions_odd) - 1)
end
set @current_char = @current_char + 1
end
--find the check digit (character) using the formula in the USPS document
set @check_digit = convert(varchar,(10 - (@total_value % 10)) % 10)
set @result = '#' + @MasterCustomerId + ' ' + @check_digit + '#'
return @result
end
المحلول
set @check_digit = convert(varchar, (10 - (@total_value % 10)) % 10)
نصائح أخرى
لست متأكدا من السبب في أن تعبث بتمثيلات السلسلة بأكملها عند العمل في لغة مجموعة.
ربما كنت أفعل ذلك مثل أدناه. ركضت أربعة اختبارات من خلال وكلها ناجحة. يمكنك توسيع هذا بسهولة لمعالجة الشخصيات أيضا ويمكنك حتى جعل الجدول دائم إذا كنت ترغب حقا في القيام بذلك.
CREATE FUNCTION dbo.Get_Mod10
(
@original_string VARCHAR(26)
)
RETURNS VARCHAR(30)
AS
BEGIN
DECLARE
@value_mapping TABLE (original_char CHAR(1) NOT NULL, odd_value TINYINT NOT NULL, even_value TINYINT NOT NULL)
INSERT INTO @value_mapping
(
original_char,
odd_value,
even_value
)
SELECT '0', 0, 0 UNION
SELECT '1', 2, 1 UNION
SELECT '2', 4, 2 UNION
SELECT '3', 6, 3 UNION
SELECT '4', 8, 4 UNION
SELECT '5', 1, 5 UNION
SELECT '6', 3, 6 UNION
SELECT '7', 5, 7 UNION
SELECT '8', 7, 8 UNION
SELECT '9', 9, 9
DECLARE
@i INT,
@clean_string VARCHAR(26),
@len_string TINYINT,
@sum SMALLINT
SET @clean_string = REPLACE(@original_string, ' ', '')
SET @len_string = LEN(@clean_string)
SET @i = 1
SET @sum = 0
WHILE (@i <= @len_string)
BEGIN
SELECT
@sum = @sum + CASE WHEN @i % 2 = 0 THEN even_value ELSE odd_value END
FROM
@value_mapping
WHERE
original_char = SUBSTRING(@clean_string, @i, 1)
SET @i = @i + 1
END
RETURN (10 - (@sum % 10)) % 10
END
GO
لماذا لدينا وزارة الدفاع الإضافية:
تحويل (varchar، 10 % <<-- ?
وتقول الوثيقة أن الرقم الأخير فقط يجب طرحه من 10. هل فاتني أي شيء؟