Broken pipe (EPIPE) on connection to loopback address

Question

I'm currently testing my networking code. This involves making a connection via the IPv4 loopback address (127.0.0.1). Unfortunately the program often (not always) gives an EPIPE error on sending data.

I am using Berkeley network sockets and libevent. I make a non-blocking socket via:

CBSocketReturn CBNewSocket(uint64_t * socketID,bool IPv6){
    *socketID = socket(IPv6 ? PF_INET6 : PF_INET, SOCK_STREAM, 0);
    if (*socketID == -1) {
        if (errno == EAFNOSUPPORT || errno == EPROTONOSUPPORT) {
            return CB_SOCKET_NO_SUPPORT;
        }
        return CB_SOCKET_BAD;
    }
    // Stop SIGPIPE annoying us.
    if (CB_NOSIGPIPE) {
        int i = 1;
        setsockopt(*socketID, SOL_SOCKET, SO_NOSIGPIPE, &i, sizeof(i));
    }
    // Make socket non-blocking
    evutil_make_socket_nonblocking((evutil_socket_t)*socketID);
    return CB_SOCKET_OK;
}

I make a connection event via:

bool CBSocketDidConnectEvent(uint64_t * eventID,uint64_t loopID,uint64_t socketID,void (*onDidConnect)(void *,void *),void * node){
    CBEvent * event = malloc(sizeof(*event));
    event->loop = (CBEventLoop *)loopID;
    event->onEvent.ptr = onDidConnect;
    event->node = node;
    event->event = event_new(((CBEventLoop *)loopID)->base, (evutil_socket_t)socketID, EV_TIMEOUT|EV_WRITE, CBDidConnect, event);
    if (NOT event->event) {
        free(event);
        event = 0;
    }
    *eventID = (uint64_t)event;
    return event;
}
void CBDidConnect(evutil_socket_t socketID,short eventNum,void * arg){
    CBEvent * event = arg;
    if (eventNum & EV_TIMEOUT) {
        // Timeout for the connection
        event->loop->onTimeOut(event->loop->communicator,event->node,CB_TIMEOUT_CONNECT);
    }else{
        // Connection successful
        event->onEvent.ptr(event->loop->communicator,event->node);
    }
}

And add it via:

bool CBSocketAddEvent(uint64_t eventID,uint16_t timeout){
    CBEvent * event = (CBEvent *)eventID;
    int res;
    if (timeout) {
        struct timeval time = {timeout,0};
        res = event_add(event->event, &time);
    }else
        res = event_add(event->event, NULL);
    return NOT res;
}

To connect:

bool CBSocketConnect(uint64_t socketID,uint8_t * IP,bool IPv6,uint16_t port){
    // Create sockaddr_in6 information for a IPv6 address
    int res;
    if (IPv6) {
        struct sockaddr_in6 address;
        memset(&address, 0, sizeof(address)); // Clear structure.
        address.sin6_family = AF_INET6;
        memcpy(&address.sin6_addr, IP, 16); // Move IP address into place.
        address.sin6_port = htons(port); // Port number to network order
        res = connect((evutil_socket_t)socketID, (struct sockaddr *)&address, sizeof(address));
    }else{
        struct sockaddr_in address;
        memset(&address, 0, sizeof(address)); // Clear structure.
        address.sin_family = AF_INET;
        memcpy(&address.sin_addr, IP + 12, 4); // Move IP address into place. Last 4 bytes for IPv4.
        address.sin_port = htons(port); // Port number to network order
        res = connect((evutil_socket_t)socketID, (struct sockaddr *)&address, sizeof(address));
    }
    if (NOT res || errno == EINPROGRESS)
        return true;
    return false;
}

Upon connection the canSend event is made:

bool CBSocketCanSendEvent(uint64_t * eventID,uint64_t loopID,uint64_t socketID,void (*onCanSend)(void *,void *),void * node){
    CBEvent * event = malloc(sizeof(*event));
    event->loop = (CBEventLoop *)loopID;
    event->onEvent.ptr = onCanSend;
    event->node = node;
    event->event = event_new(((CBEventLoop *)loopID)->base, (evutil_socket_t)socketID, EV_TIMEOUT|EV_WRITE|EV_PERSIST, CBCanSend, event);
    if (NOT event->event) {
        free(event);
        event = 0;
    }
    *eventID = (uint64_t)event;
    return event;
}
void CBCanSend(evutil_socket_t socketID,short eventNum,void * arg){
    CBEvent * event = arg;
    if (eventNum & EV_TIMEOUT) {
        // Timeout when waiting to write.
        event->loop->onTimeOut(event->loop->communicator,event->node,CB_TIMEOUT_SEND);
    }else{
        // Can send
        event->onEvent.ptr(event->loop->communicator,event->node);
    }
}

But sending often gives an EPIPE error:

int32_t CBSocketSend(uint64_t socketID,uint8_t * data,uint32_t len){
    ssize_t res = send((evutil_socket_t)socketID, data, len, CB_SEND_FLAGS);
    printf("SENT (%li): ",res);
    for (uint32_t x = 0; x < res; x++) {
        printf("%c",data[x]);
    }
    printf("\n");
    if (res >= 0)
        return (int32_t)res;
    if (errno == EAGAIN)
        return 0; // False event. Wait again.
    return CB_SOCKET_FAILURE; // Failure
}

It lands on return CB_SOCKET_FAILURE; and errno is set to EPIPE. Now why would this be? The send flags is just MSG_NOSIGNAL if it is set because SIGPIPE kept interrupting the program with this error. I want EPIPE to cause CBSocketSend to return CB_SOCKET_FAILURE and not interrupt the program, but there is not reason for the send to fail with EPIPE, so why is it doing it?

Last time I got the error I noticed the thread that connects was still on the connect() call. Is there danger in making a connection event to be handled by a separate thread than the thread that connects?

See the network code in these places:

https://github.com/MatthewLM/cbitcoin/blob/master/test/testCBNetworkCommunicator.c https://github.com/MatthewLM/cbitcoin/tree/master/src/structures/CBObject/CBNetworkCommunicator https://github.com/MatthewLM/cbitcoin/tree/master/dependencies/sockets

Thank you.

Edit: I ran it again and I got the error after connect() had finished.

EDIT 2: It seems the connection event is being given without an accept from the other side.

Answer 1

Below is a simple libevent toy program that synthesizes EINPROGRESS, and then waits for the connection to complete by waiting for EV_WRITE. Basically, this program shows that in your application, you should attempt to do the connect call first, and if it fails with EINPROGRESS, you should wait for completion before performing I/O.

This is the libevent callback function:

extern "C" void on_connect (int sock, short ev, void *arg) {
    assert(ev == EV_WRITE);
    std::cout << "got wrieable on: " << sock << '\n';
    int optval = -1;
    socklen_t optlen = sizeof(optval);
    getsockopt(sock, SOL_SOCKET, SO_ERROR, &optval, &optlen);
    assert(optval == 0);
    std::cout << "succesful asynchronous connect on: " << sock << '\n';
    event_loopbreak();
}

These are some helper functions used by the toy application:

static void init_addr (struct sockaddr_in *addr, short port) {
    memset(addr, '\0', sizeof(*addr));
    addr->sin_family = AF_INET;
    addr->sin_port = htons(port);
    addr->sin_addr.s_addr = htonl(INADDR_LOOPBACK);
}

static void setup_accept (int sock) {
    const int one = 1;
    struct sockaddr_in addr;
    init_addr(&addr, 9876);
    setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one));
    bind(sock, (struct sockaddr *)&addr, sizeof(addr));
    listen(sock, 1);
}

static int complete_accept (int sock) {
    struct sockaddr_in addr;
    socklen_t addrlen = sizeof(addr);
    return accept(sock, (struct sockaddr *)&addr, &addrlen);
}

static int try_connect (int sock) {
    struct sockaddr_in addr;
    init_addr(&addr, 9876);
    return connect(sock, (struct sockaddr *)&addr, sizeof(addr));
}

And the main program is below:

int main () {
    int accept_sock = socket(PF_INET, SOCK_STREAM, 0);
    setup_accept(accept_sock);
    int sock = socket(PF_INET, SOCK_STREAM, 0);
    fcntl(sock, F_SETFL, fcntl(sock, F_GETFL) | O_NONBLOCK);
    std::cout << "trying first connect on: " << sock << '\n';
    int r = try_connect(sock);
    assert(r < 0 && errno == EINPROGRESS);
    event_init();
    struct event ev_connect;
    event_set(&ev_connect, sock, EV_WRITE, on_connect, 0);
    event_add(&ev_connect, 0);
    int new_sock = complete_accept(accept_sock);
    event_dispatch();
    return 0;
}

Answer 2

I am not a TCP/IP expert, but I did notice that this documentation says EPIPE can still be returned even when MSG_NOSIGNAL is set with a 'stream oriented socket'. It looks like you are creating your socket with SOCK_STREAM. The other end may be breaking the connection.

In CBSocketConnect() it looks like if you get EINPROGRESS you just return true-- which you also return if it connects successfully. You would have no way of knowing if you needed to wait for the connection to finish. According to this you could select() or poll() for connection completion.

---

The above is a repost of my comments from the OP at the request of @MatthewMitchell and @user315052.

---

Edit: I am adding a more detailed description of this answer, and some of the discussion that followed.

So, first try to do the connect(). Then, if EINPROGRESS is the error result, register for a write event wakeup from libevent. After getting into the callback function for EV_WRITE, check to see the status of the connection with getsockopt() with socket option SO_ERROR at level SOL_SOCKET. If the option value returned is 0, the connection has succeeded. Otherwise, treat it as an errno number.

After following this advice as illustrated in this answer, you discovered that the client encountered the error ECONNREFUSED. This explains why your writes were failing with EPIPE. After investigating your server, you found that the server was not able to listen to the bound address because of the error EADDRINUSE. This can be dealt with by setting the SO_REUSEADDR option on the listening socket.

Answer 3

From the moment when your process has woken up to handle the connection success, and up until the moment it tries to write to the socket, the connection's state can still change at the operating system's kernel point of of view, and libevent cannot have foresight about it.

The scenario you are describing is can be comprised of the following stages, given that the server you are connecting to behaves in a way I am about to describe. Given Process A (your client) and Process B (the other side of the connection):

1. B runs, binds a server socket, waits.
2. A runs, connect(), waits
3. B wakes, does accept()
4. A wakes up to handle the connection's success.
5. B closes the socket (either due to process termination or explicit close()).
6. A tries to send, gets errno == EPIPE.

This can be reproduced on a loopback.

BTW, SO_NOSIGPIPE is not portable socket option. If you are writing a portable C library, it is better to ignore the signal using signal() with SIG_IGN.