Contrôler un appareil qui interagit uniquement via Hyperterminal à l'aide de python
-
28-10-2019 - |
Question
J'essaie d'écrire un pilote de base pour contrôler un périphérique qui n'interagit qu'avec l'hyperterminal.Toutes les entrées attendent des données formatées HT et tous les retours incluent de copieux signes égaux, des retours à la ligne et des espaces afin d'obtenir le formatage correct pour la visualisation humaine.Je suis à peu près sûr que les retours génèrent des problèmes, car je lance beaucoup d'exceptions, mais je ne sais pas comment je peux y faire face.Quelqu'un connaît-il une meilleure façon de procéder?
Manuel de l'appareil: http://us.startech.com/media/products/PCM815SHNA/Manuals/PCM815SHNA.pdf
import visa
import re
class iopower8(visa.SerialInstrument):
#initialization
def __init__(self,loc):
visa.SerialInstrument.__init__(self,loc)
self.term_chars = '\r' #set terminal characters
self.write('\r\r') #start faux 'Hyperterminal'
def on(self, bank, out):
self.ask("on " + str(bank) + " " + str(out))
for i in range (1,3):#read buffer into void to prevent issues
try:
self.read_raw()
except(visa_exceptions.VisaIOError):
self.buffer_clear()
break
return self.status(bank, out)
def off(self, bank, out):
self.ask("of " + str(bank) + " " + str(out))
for i in range (1,3):#read buffer into void to prevent issues
try:
self.read_raw()
except(visa_exceptions.VisaIOError):
self.buffer_clear()
break
return self.status(bank, out)
def status(self, bank, port): #enter bank and port # you want to check
self.ask("st " + str(bank))
result = 'Error' #send error message regardless
for i in range (1,13):#all 12 lines need to be read out of the buffer to prevent issues later
try:
stuff = self.read()#read the line to a holding srting, and dump in void if wriong line to clear buffer
if stuff.strip() == ('='*44):
break
except(visa_exceptions.VisaIOError):
break
for i in range(1,9):
try:
stuff = self.read()#read the line to a holding string, and dump in void if wriong line to clear buffer.
if i == port: #this offset will get you to the line with the relevant port's status
result = re.match('(.*?)(ON|OFF)', stuff) #regex to the find the on/off status
#convert to boolean
if result.group(2) == 'ON':
result = True
elif result.group(2) =='OFF':
result = False
else:
result = 'ERROR'
except(visa_exceptions.VisaIOError):
self.buffer_clear()
break
return result
def buffer_clear(self): #in case of buffer jamming
while True:
try:
self.read_raw()
except(visa_exceptions.VisaIOError):
break
def all_on(self, bank):
self.ask("on " + str(bank) + " 0")
for i in range (1,3):#read buffer into void to prevent issues
try:
hold = self.read_raw()
except(visa_exceptions.VisaIOError):
self.buffer_clear()
break
def all_off(self, bank):
self.ask("of " + str(bank) + " 0")
for i in range (1,3):#read buffer into void to prevent issues
try:
self.read_raw()
except(visa_exceptions.VisaIOError):
self.buffer_clear()
break
La solution
HiperTerminal n'a rien de spécial.Le caractère de fin de ligne est généralement '\r\n'
ou '\n'
seul.