Ecriture d'une image BMP dans le plus pur c / c ++ sans autres bibliothèques

Question

Dans mon algorithme j'ai besoin de créer une sortie d'information. Je dois écrire matrice booléenne dans le fichier bmp. Il doit être l'image monocromic, où pixel est blanc si la matrice sur cet élément est vrai. Le principal problème est la tête bmp et comment écrire ceci.

Answer 1

Sans l'utilisation de toute autre bibliothèque, vous pouvez consulter le format de fichier BMP . Je l'ai mis en œuvre dans le passé et il peut être fait sans trop de travail.

  

Structures Bitmap-File

     

Chaque fichier bitmap contient un   header bitmap-fichier, un   en-tête des informations de bitmap, une couleur   table, et un tableau d'octets que   définit les bits bitmap. Le fichier a   la forme suivante:

     

BITMAPFILEHEADER bmfh;
  BITMAPINFOHEADER bmih;
  RGBQUAD aColors [];
  aBitmapBits BYTE [];

... voir le format de fichier pour plus de détails

Answer 2

Voir si cela fonctionne pour vous ... Dans ce code, j'avais 3 tableaux 2 dimensions, rouge appelées, vert et bleu. Chacun était de taille [largeur] [hauteur], et chaque élément correspond à un pixel - J'espère que ce sens

FILE *f;
unsigned char *img = NULL;
int filesize = 54 + 3*w*h;  //w is your image width, h is image height, both int

img = (unsigned char *)malloc(3*w*h);
memset(img,0,3*w*h);

for(int i=0; i<w; i++)
{
    for(int j=0; j<h; j++)
    {
        x=i; y=(h-1)-j;
        r = red[i][j]*255;
        g = green[i][j]*255;
        b = blue[i][j]*255;
        if (r > 255) r=255;
        if (g > 255) g=255;
        if (b > 255) b=255;
        img[(x+y*w)*3+2] = (unsigned char)(r);
        img[(x+y*w)*3+1] = (unsigned char)(g);
        img[(x+y*w)*3+0] = (unsigned char)(b);
    }
}

unsigned char bmpfileheader[14] = {'B','M', 0,0,0,0, 0,0, 0,0, 54,0,0,0};
unsigned char bmpinfoheader[40] = {40,0,0,0, 0,0,0,0, 0,0,0,0, 1,0, 24,0};
unsigned char bmppad[3] = {0,0,0};

bmpfileheader[ 2] = (unsigned char)(filesize    );
bmpfileheader[ 3] = (unsigned char)(filesize>> 8);
bmpfileheader[ 4] = (unsigned char)(filesize>>16);
bmpfileheader[ 5] = (unsigned char)(filesize>>24);

bmpinfoheader[ 4] = (unsigned char)(       w    );
bmpinfoheader[ 5] = (unsigned char)(       w>> 8);
bmpinfoheader[ 6] = (unsigned char)(       w>>16);
bmpinfoheader[ 7] = (unsigned char)(       w>>24);
bmpinfoheader[ 8] = (unsigned char)(       h    );
bmpinfoheader[ 9] = (unsigned char)(       h>> 8);
bmpinfoheader[10] = (unsigned char)(       h>>16);
bmpinfoheader[11] = (unsigned char)(       h>>24);

f = fopen("img.bmp","wb");
fwrite(bmpfileheader,1,14,f);
fwrite(bmpinfoheader,1,40,f);
for(int i=0; i<h; i++)
{
    fwrite(img+(w*(h-i-1)*3),3,w,f);
    fwrite(bmppad,1,(4-(w*3)%4)%4,f);
}

free(img);
fclose(f);

Answer 3

est le meilleur exemple de bas niveau que je sais, écrit par Evercat. copiés à partir https://en.wikipedia.org/wiki/User:Evercat/Buddhabrot.c

void drawbmp (char * filename) {

unsigned int headers[13];
FILE * outfile;
int extrabytes;
int paddedsize;
int x; int y; int n;
int red, green, blue;

extrabytes = 4 - ((WIDTH * 3) % 4);                 // How many bytes of padding to add to each
                                                    // horizontal line - the size of which must
                                                    // be a multiple of 4 bytes.
if (extrabytes == 4)
   extrabytes = 0;

paddedsize = ((WIDTH * 3) + extrabytes) * HEIGHT;

// Headers...
// Note that the "BM" identifier in bytes 0 and 1 is NOT included in these "headers".

headers[0]  = paddedsize + 54;      // bfSize (whole file size)
headers[1]  = 0;                    // bfReserved (both)
headers[2]  = 54;                   // bfOffbits
headers[3]  = 40;                   // biSize
headers[4]  = WIDTH;  // biWidth
headers[5]  = HEIGHT; // biHeight

// Would have biPlanes and biBitCount in position 6, but they're shorts.
// It's easier to write them out separately (see below) than pretend
// they're a single int, especially with endian issues...

headers[7]  = 0;                    // biCompression
headers[8]  = paddedsize;           // biSizeImage
headers[9]  = 0;                    // biXPelsPerMeter
headers[10] = 0;                    // biYPelsPerMeter
headers[11] = 0;                    // biClrUsed
headers[12] = 0;                    // biClrImportant

outfile = fopen(filename, "wb");

//
// Headers begin...
// When printing ints and shorts, we write out 1 character at a time to avoid endian issues.
//

fprintf(outfile, "BM");

for (n = 0; n <= 5; n++)
{
   fprintf(outfile, "%c", headers[n] & 0x000000FF);
   fprintf(outfile, "%c", (headers[n] & 0x0000FF00) >> 8);
   fprintf(outfile, "%c", (headers[n] & 0x00FF0000) >> 16);
   fprintf(outfile, "%c", (headers[n] & (unsigned int) 0xFF000000) >> 24);
}

// These next 4 characters are for the biPlanes and biBitCount fields.

fprintf(outfile, "%c", 1);
fprintf(outfile, "%c", 0);
fprintf(outfile, "%c", 24);
fprintf(outfile, "%c", 0);

for (n = 7; n <= 12; n++)
{
   fprintf(outfile, "%c", headers[n] & 0x000000FF);
   fprintf(outfile, "%c", (headers[n] & 0x0000FF00) >> 8);
   fprintf(outfile, "%c", (headers[n] & 0x00FF0000) >> 16);
   fprintf(outfile, "%c", (headers[n] & (unsigned int) 0xFF000000) >> 24);
}

//
// Headers done, now write the data...
//

for (y = HEIGHT - 1; y >= 0; y--)     // BMP image format is written from bottom to top...
{
   for (x = 0; x <= WIDTH - 1; x++)
   {

      red = reduce(redcount[x][y] + COLOUR_OFFSET) * red_multiplier;
      green = reduce(greencount[x][y] + COLOUR_OFFSET) * green_multiplier;
      blue = reduce(bluecount[x][y] + COLOUR_OFFSET) * blue_multiplier;

      if (red > 255) red = 255; if (red < 0) red = 0;
      if (green > 255) green = 255; if (green < 0) green = 0;
      if (blue > 255) blue = 255; if (blue < 0) blue = 0;

      // Also, it's written in (b,g,r) format...

      fprintf(outfile, "%c", blue);
      fprintf(outfile, "%c", green);
      fprintf(outfile, "%c", red);
   }
   if (extrabytes)      // See above - BMP lines must be of lengths divisible by 4.
   {
      for (n = 1; n <= extrabytes; n++)
      {
         fprintf(outfile, "%c", 0);
      }
   }
}

fclose(outfile);
return;
}


drawbmp(filename);

Answer 4

Notez que les lignes sont enregistrées de bas en haut et non l'inverse.

En outre, les lignes de balayage doit avoir un octet longueur des multiples de quatre, vous devez insérer remplissage octets à la fin des lignes à cet effet.

Answer 5

code propre C pour Bitmap (BMP) la génération des images

, Image:

---

_{Le code ne pas utiliser toute autre bibliothèque que stdio.h . Ainsi, le code peut être facilement intégré dans d'autres langues de C-famille, comme- C ++, C #, Java.}

---

#include <stdio.h>

const int bytesPerPixel = 3; /// red, green, blue
const int fileHeaderSize = 14;
const int infoHeaderSize = 40;

void generateBitmapImage(unsigned char *image, int height, int width, char* imageFileName);
unsigned char* createBitmapFileHeader(int height, int width, int paddingSize);
unsigned char* createBitmapInfoHeader(int height, int width);


int main(){
    int height = 341;
    int width = 753;
    unsigned char image[height][width][bytesPerPixel];
    char* imageFileName = "bitmapImage.bmp";

    int i, j;
    for(i=0; i<height; i++){
        for(j=0; j<width; j++){
            image[i][j][2] = (unsigned char)((double)i/height*255); ///red
            image[i][j][1] = (unsigned char)((double)j/width*255); ///green
            image[i][j][0] = (unsigned char)(((double)i+j)/(height+width)*255); ///blue
        }
    }

    generateBitmapImage((unsigned char *)image, height, width, imageFileName);
    printf("Image generated!!");
}


void generateBitmapImage(unsigned char *image, int height, int width, char* imageFileName){

    unsigned char padding[3] = {0, 0, 0};
    int paddingSize = (4 - (width*bytesPerPixel) % 4) % 4;

    unsigned char* fileHeader = createBitmapFileHeader(height, width, paddingSize);
    unsigned char* infoHeader = createBitmapInfoHeader(height, width);

    FILE* imageFile = fopen(imageFileName, "wb");

    fwrite(fileHeader, 1, fileHeaderSize, imageFile);
    fwrite(infoHeader, 1, infoHeaderSize, imageFile);

    int i;
    for(i=0; i<height; i++){
        fwrite(image+(i*width*bytesPerPixel), bytesPerPixel, width, imageFile);
        fwrite(padding, 1, paddingSize, imageFile);
    }

    fclose(imageFile);
}

unsigned char* createBitmapFileHeader(int height, int width, int paddingSize){
    int fileSize = fileHeaderSize + infoHeaderSize + (bytesPerPixel*width+paddingSize) * height;

    static unsigned char fileHeader[] = {
        0,0, /// signature
        0,0,0,0, /// image file size in bytes
        0,0,0,0, /// reserved
        0,0,0,0, /// start of pixel array
    };

    fileHeader[ 0] = (unsigned char)('B');
    fileHeader[ 1] = (unsigned char)('M');
    fileHeader[ 2] = (unsigned char)(fileSize    );
    fileHeader[ 3] = (unsigned char)(fileSize>> 8);
    fileHeader[ 4] = (unsigned char)(fileSize>>16);
    fileHeader[ 5] = (unsigned char)(fileSize>>24);
    fileHeader[10] = (unsigned char)(fileHeaderSize + infoHeaderSize);

    return fileHeader;
}

unsigned char* createBitmapInfoHeader(int height, int width){
    static unsigned char infoHeader[] = {
        0,0,0,0, /// header size
        0,0,0,0, /// image width
        0,0,0,0, /// image height
        0,0, /// number of color planes
        0,0, /// bits per pixel
        0,0,0,0, /// compression
        0,0,0,0, /// image size
        0,0,0,0, /// horizontal resolution
        0,0,0,0, /// vertical resolution
        0,0,0,0, /// colors in color table
        0,0,0,0, /// important color count
    };

    infoHeader[ 0] = (unsigned char)(infoHeaderSize);
    infoHeader[ 4] = (unsigned char)(width    );
    infoHeader[ 5] = (unsigned char)(width>> 8);
    infoHeader[ 6] = (unsigned char)(width>>16);
    infoHeader[ 7] = (unsigned char)(width>>24);
    infoHeader[ 8] = (unsigned char)(height    );
    infoHeader[ 9] = (unsigned char)(height>> 8);
    infoHeader[10] = (unsigned char)(height>>16);
    infoHeader[11] = (unsigned char)(height>>24);
    infoHeader[12] = (unsigned char)(1);
    infoHeader[14] = (unsigned char)(bytesPerPixel*8);

    return infoHeader;
}

Answer 6

Voici une variante C ++ du code qui fonctionne pour moi. Notez que je devais changer le calcul de la taille de compte pour le remplissage de la ligne.

// mimeType = "image/bmp";

unsigned char file[14] = {
    'B','M', // magic
    0,0,0,0, // size in bytes
    0,0, // app data
    0,0, // app data
    40+14,0,0,0 // start of data offset
};
unsigned char info[40] = {
    40,0,0,0, // info hd size
    0,0,0,0, // width
    0,0,0,0, // heigth
    1,0, // number color planes
    24,0, // bits per pixel
    0,0,0,0, // compression is none
    0,0,0,0, // image bits size
    0x13,0x0B,0,0, // horz resoluition in pixel / m
    0x13,0x0B,0,0, // vert resolutions (0x03C3 = 96 dpi, 0x0B13 = 72 dpi)
    0,0,0,0, // #colors in pallete
    0,0,0,0, // #important colors
    };

int w=waterfallWidth;
int h=waterfallHeight;

int padSize  = (4-(w*3)%4)%4;
int sizeData = w*h*3 + h*padSize;
int sizeAll  = sizeData + sizeof(file) + sizeof(info);

file[ 2] = (unsigned char)( sizeAll    );
file[ 3] = (unsigned char)( sizeAll>> 8);
file[ 4] = (unsigned char)( sizeAll>>16);
file[ 5] = (unsigned char)( sizeAll>>24);

info[ 4] = (unsigned char)( w   );
info[ 5] = (unsigned char)( w>> 8);
info[ 6] = (unsigned char)( w>>16);
info[ 7] = (unsigned char)( w>>24);

info[ 8] = (unsigned char)( h    );
info[ 9] = (unsigned char)( h>> 8);
info[10] = (unsigned char)( h>>16);
info[11] = (unsigned char)( h>>24);

info[20] = (unsigned char)( sizeData    );
info[21] = (unsigned char)( sizeData>> 8);
info[22] = (unsigned char)( sizeData>>16);
info[23] = (unsigned char)( sizeData>>24);

stream.write( (char*)file, sizeof(file) );
stream.write( (char*)info, sizeof(info) );

unsigned char pad[3] = {0,0,0};

for ( int y=0; y<h; y++ )
{
    for ( int x=0; x<w; x++ )
    {
        long red = lround( 255.0 * waterfall[x][y] );
        if ( red < 0 ) red=0;
        if ( red > 255 ) red=255;
        long green = red;
        long blue = red;

        unsigned char pixel[3];
        pixel[0] = blue;
        pixel[1] = green;
        pixel[2] = red;

        stream.write( (char*)pixel, 3 );
    }
    stream.write( (char*)pad, padSize );
}

Answer 7

Je modifié le code de htp ralf afin qu'il compilerait (sur gcc, ubuntu 16.04 LTS en cours d'exécution). Il était juste une question d'initialisation des variables.

    int w = 100; /* Put here what ever width you want */
    int h = 100; /* Put here what ever height you want */
    int red[w][h]; 
    int green[w][h];
    int blue[w][h];


    FILE *f;
    unsigned char *img = NULL;
    int filesize = 54 + 3*w*h;  //w is your image width, h is image height, both int
    if( img )
            free( img );
    img = (unsigned char *)malloc(3*w*h);
    memset(img,0,sizeof(img));
    int x;
    int y;
    int r;
    int g;
    int b;

    for(int i=0; i<w; i++)
    {
            for(int j=0; j<h; j++)
            {
                    x=i; y=(h-1)-j;
                    r = red[i][j]*255;
                    g = green[i][j]*255;
                    b = blue[i][j]*255;
                    if (r > 255) r=255;
                    if (g > 255) g=255;
                    if (b > 255) b=255;
                    img[(x+y*w)*3+2] = (unsigned char)(r);
                    img[(x+y*w)*3+1] = (unsigned char)(g);
                    img[(x+y*w)*3+0] = (unsigned char)(b);
            }
    }

    unsigned char bmpfileheader[14] = {'B','M', 0,0,0,0, 0,0, 0,0, 54,0,0,0};
    unsigned char bmpinfoheader[40] = {40,0,0,0, 0,0,0,0, 0,0,0,0, 1,0, 24,0};
    unsigned char bmppad[3] = {0,0,0};

    bmpfileheader[ 2] = (unsigned char)(filesize    );
    bmpfileheader[ 3] = (unsigned char)(filesize>> 8);
    bmpfileheader[ 4] = (unsigned char)(filesize>>16);
    bmpfileheader[ 5] = (unsigned char)(filesize>>24);

    bmpinfoheader[ 4] = (unsigned char)(       w    );
    bmpinfoheader[ 5] = (unsigned char)(       w>> 8);
    bmpinfoheader[ 6] = (unsigned char)(       w>>16);
    bmpinfoheader[ 7] = (unsigned char)(       w>>24);
    bmpinfoheader[ 8] = (unsigned char)(       h    );
    bmpinfoheader[ 9] = (unsigned char)(       h>> 8);
    bmpinfoheader[10] = (unsigned char)(       h>>16);
    bmpinfoheader[11] = (unsigned char)(       h>>24);

    f = fopen("img.bmp","wb");
    fwrite(bmpfileheader,1,14,f);
    fwrite(bmpinfoheader,1,40,f);
    for(int i=0; i<h; i++)
    {
            fwrite(img+(w*(h-i-1)*3),3,w,f);
            fwrite(bmppad,1,(4-(w*3)%4)%4,f);
    }
    fclose(f);

Answer 8

Si vous obtenez des couleurs étranges passe au milieu de l'image en utilisant la fonction ci-dessus C de. Assurez-vous d'ouvrir le outstream en mode binaire:  imgFile.open(filename, std::ios_base::out | std::ios_base::binary);
Sinon, les caractères indésirables insère des fenêtres dans le milieu de votre fichier! (Se cogne la tête sur cette question pendant des heures)

Voir la question connexe ici: Pourquoi ofstream insert un octet 0x0D avant 0x0A?

Answer 9

Je voulais juste partager une version améliorée du code de Minhas Kamal parce que même si cela a fonctionné assez bien pour la plupart des applications, j'ai eu quelques problèmes avec elle encore. Deux choses très importantes à retenir:

1. Le code (au moment de l'écriture) appelle libre () sur deux tableaux statiques. Cela entraînera votre programme plantage. Donc, j'ai commenté ces lignes.
2. Ne supposez jamais que votre pas de données de pixels est toujours (largeur * BytesPerPixel). Il est préférable de laisser l'utilisateur de spécifier la valeur de pas. Exemple: lors de la manipulation des ressources en Direct3D, le RowPitch est jamais garanti d'être un multiple de la profondeur d'octet utilisé. Cela peut provoquer des erreurs dans vos bitmaps générés (en particulier à des résolutions impaires telles que 1366x768).

Ci-dessous, vous pouvez voir mes révisions à son code:

const int bytesPerPixel = 4; /// red, green, blue
const int fileHeaderSize = 14;
const int infoHeaderSize = 40;

void generateBitmapImage(unsigned char *image, int height, int width, int pitch, const char* imageFileName);
unsigned char* createBitmapFileHeader(int height, int width, int pitch, int paddingSize);
unsigned char* createBitmapInfoHeader(int height, int width);



void generateBitmapImage(unsigned char *image, int height, int width, int pitch, const char* imageFileName) {

    unsigned char padding[3] = { 0, 0, 0 };
    int paddingSize = (4 - (/*width*bytesPerPixel*/ pitch) % 4) % 4;

    unsigned char* fileHeader = createBitmapFileHeader(height, width, pitch, paddingSize);
    unsigned char* infoHeader = createBitmapInfoHeader(height, width);

    FILE* imageFile = fopen(imageFileName, "wb");

    fwrite(fileHeader, 1, fileHeaderSize, imageFile);
    fwrite(infoHeader, 1, infoHeaderSize, imageFile);

    int i;
    for (i = 0; i < height; i++) {
        fwrite(image + (i*pitch /*width*bytesPerPixel*/), bytesPerPixel, width, imageFile);
        fwrite(padding, 1, paddingSize, imageFile);
    }

    fclose(imageFile);
    //free(fileHeader);
    //free(infoHeader);
}

unsigned char* createBitmapFileHeader(int height, int width, int pitch, int paddingSize) {
    int fileSize = fileHeaderSize + infoHeaderSize + (/*bytesPerPixel*width*/pitch + paddingSize) * height;

    static unsigned char fileHeader[] = {
        0,0, /// signature
        0,0,0,0, /// image file size in bytes
        0,0,0,0, /// reserved
        0,0,0,0, /// start of pixel array
    };

    fileHeader[0] = (unsigned char)('B');
    fileHeader[1] = (unsigned char)('M');
    fileHeader[2] = (unsigned char)(fileSize);
    fileHeader[3] = (unsigned char)(fileSize >> 8);
    fileHeader[4] = (unsigned char)(fileSize >> 16);
    fileHeader[5] = (unsigned char)(fileSize >> 24);
    fileHeader[10] = (unsigned char)(fileHeaderSize + infoHeaderSize);

    return fileHeader;
}

unsigned char* createBitmapInfoHeader(int height, int width) {
    static unsigned char infoHeader[] = {
        0,0,0,0, /// header size
        0,0,0,0, /// image width
        0,0,0,0, /// image height
        0,0, /// number of color planes
        0,0, /// bits per pixel
        0,0,0,0, /// compression
        0,0,0,0, /// image size
        0,0,0,0, /// horizontal resolution
        0,0,0,0, /// vertical resolution
        0,0,0,0, /// colors in color table
        0,0,0,0, /// important color count
    };

    infoHeader[0] = (unsigned char)(infoHeaderSize);
    infoHeader[4] = (unsigned char)(width);
    infoHeader[5] = (unsigned char)(width >> 8);
    infoHeader[6] = (unsigned char)(width >> 16);
    infoHeader[7] = (unsigned char)(width >> 24);
    infoHeader[8] = (unsigned char)(height);
    infoHeader[9] = (unsigned char)(height >> 8);
    infoHeader[10] = (unsigned char)(height >> 16);
    infoHeader[11] = (unsigned char)(height >> 24);
    infoHeader[12] = (unsigned char)(1);
    infoHeader[14] = (unsigned char)(bytesPerPixel * 8);

    return infoHeader;
}