Comment calculer le CRC dans le protocole RFID
Question
Lors de la lecture des données d'un dispositif RFID, vous trouverez un CRC-CCITT sur la charge utile. « Le CRC est initialisé avec 0x3791 au lieu de la valeur habituelle 0xFFFF. » Comment puis-je définir la fonction, que vérifie que le CRC est ok.
échantillon
data: { 0x02, 0x40, 0x00, 0x00, 0x00, 0x00, 0xA0 }
CRC: {0x60, 0xE7}
autre échantillon
data: { 0x02, 0x41, 0x00, 0x00, 0x00, 0x00, 0xA4 }
CRC: {0x6F, 0xA5}
La solution
La seule façon que je pouvais obtenir ce travail a été mise en œuvre par l'algorithme bit par bit (TMS37157 fiche Figure 52).
UINT16 rfid_get_crc(const UINT8 * data, INT8 size)
{
static BOOL lsb;
static BOOL rxdt;
static UINT16 crc;
static UINT8 bits;
static UINT8 byte;
static UINT8 i;
const UINT16 RFID_CRC_INIT = 0x3791;
crc = RFID_CRC_INIT;
for (i=0; i<size; i++)
{
bits = 8;
byte = data[i]; // Next byte
while (bits --> 0)
{
lsb = crc & 1; // Store LSB
crc >>= 1; // Shift right 1 bit
rxdt = byte & 1;
if (rxdt)
crc |= 0x8000; // Shift in next bit
if (lsb) // Check stored LSB
crc ^= 0x8000; // Invert MSB
if (0x8000 == (crc & 0x8000)) // Check MSB
crc ^= 0x0408; // Invert bits 3 and 10
byte >>= 1; // Next bit
}
}
return crc;
}
Autres conseils
Une mise en œuvre plus compact (dans le code pseudo) est:
// Least significant bit first (little-endian)
// x^16+x^12+x^5+1 = 1000 0100 0000 1000 (1) = 0x8408
function crc(byte array string[1..len], int len) {
//Other RFID tags I have seen use initialization of 0x0000:
//rem := 0x3791;
rem := 0x3791;
for i from 1 to len {
rem := rem xor string[i]
for j from 1 to 8 { // Assuming 8 bits per byte
if rem and 0x0001 { // if rightmost (most significant) bit is set
rem := (rem rightShift 1) xor 0x8408
} else {
rem := rem rightShift 1
}
}
}
// A popular variant complements rem here
return rem
se trouve dans le Fragment de code 5:
http://en.wikipedia.org/wiki/Computation_of_cyclic_redundancy_checks