memorizzare un valore da un numero intero senza segno (lungo 2 byte) a una variabile char senza segno usando operatori bit per bit?
-
06-07-2019 - |
Domanda
Come inserisco il valore di 0x04 nel registro 4 se istruzione era 1rxy? 1RXY-Carica registro R con il valore all'indirizzo di memoria XY
#include <stdio.h>
unsigned char r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,ra,rb,rc,rd,re,rf;
void reg_check(unsigned char reg);
void rxy1(unsigned char reg, unsigned char val);
int main(){
unsigned char memloc1=0x14;
unisgned char memloc2=0x04;
unsigned char temp,reg,val_add;
temp=(x && 0xFF00) >> 8;
if (temp = 0xB){
reg=(memloc1 &0x0F);
val_add=memloc2;
rxy1(reg,val_add);
}
return 0;
}
void reg_check(unsigned char reg){
}
void rxy1(unsigned char reg, unsigned char val){
L'istruzione effettiva è 0x1404, suddivisa in due byte, memloc1 e memloc2. Secondo il formato di 1rxy, che significa mettere il valore "a" posizione di memoria xy nel registro r.
quindi qui il registro 4 o unsigned char r4
dovrebbe contenere il valore nella posizione di memoria 0x04 che contiene un altro numero.
La mia domanda è come testare la variabile di registro determinando la "quot" o 1 "r" xy in 1 "4" 04 e immissione del valore trattenuto nella posizione xy nella variabile char senza segno r4
ad esempio se la posizione di memoria 0x04
conteneva 0xFB
.
Spero che abbia senso.
[modifica] Esempio
#include <stdio.h>
int main(){
unsigned char r0,r2,r3,r4;
unsigned char mem1=0x14; //at lmemory address 00
unsigned char mem2=0x04; //at lmemory address 01
unsigned char reg_val_store=mem1 & 0x0F;
if( ((mem1= & 0xF0) >> 4) == 0x1){
if (reg_val_store == 0x4){
//then put value store at memory address "04" into register 4.
//and just say for example "0xFD" was at memory location "04"
//since register value is 4 from the instruction read in 0x1"4"04
//i want to put 0xFD in the r4 unsigned char variable, how do i do this?
r4=0xFD; // this is of course correct but the instruction read in changes and
// so does the register variable. how do i modify my code for this change?
}
}
return 0;
}
Soluzione
Se ho capito bene, vuoi mettere B4 nella memoria [0] e 04 nella memoria [1]. Ho ragione?
Questo lo farà.
memory[0] = ((x & 0xFF00) >> 8 ); //Will put B4 in memory[0]
memory[1] = (x & 0xFF); //Will put 04 in memory[1]
Penso che dopo si desideri controllare B e 4 separatamente nella memoria [0] e quindi procedere con il passaggio successivo. Giusto?
(memory[0] & 0xF0) >> 4 // will give you 0xB
(memory[0] & 0x0F) //will give you 0x4
È questo quello che stai cercando?
Aggiorna : per il tuo problema di lettura, dovresti utilizzare questo.
while (!feof(f))
{
fscanf(f,"%X",&inst[i]);
i++;
}
Questo legge fino a EOF e potresti usare il valore i dopo questo ciclo per sapere quante istruzioni vengono lette e metterlo in una variabile dire n_instr. E poi per le istruzioni in loop puoi usare questo
while(loop<n_instr) //instead of just loop<80
{
memory[j] = ((inst[loop] & 0xFF00) >> 8 );
j=j+2;
memory[k] = (inst[loop] & 0x00FF);
k=k+2;
loop++;
}