取得最終n行のファイルのバージョンのPythonと、テール
質問
書いログファイルビューアによるウェブアプリケーションがしたい設定のラインのログファイルです。の項目ファイルラインに基づく最新の商品でした。
ながらやっていく必要がある、 tail()
る方法で n
ライン下から支援し、相殺するものとする。私たように見えます。
def tail(f, n, offset=0):
"""Reads a n lines from f with an offset of offset lines."""
avg_line_length = 74
to_read = n + offset
while 1:
try:
f.seek(-(avg_line_length * to_read), 2)
except IOError:
# woops. apparently file is smaller than what we want
# to step back, go to the beginning instead
f.seek(0)
pos = f.tell()
lines = f.read().splitlines()
if len(lines) >= to_read or pos == 0:
return lines[-to_read:offset and -offset or None]
avg_line_length *= 1.3
この合理的なアプローチを考えていますか。何がそうすることによってテールログファイルのオフセット?
解決 6
使用したコード。これがこれまでで最高だと思います:
def tail(f, n, offset=None):
"""Reads a n lines from f with an offset of offset lines. The return
value is a tuple in the form ``(lines, has_more)`` where `has_more` is
an indicator that is `True` if there are more lines in the file.
"""
avg_line_length = 74
to_read = n + (offset or 0)
while 1:
try:
f.seek(-(avg_line_length * to_read), 2)
except IOError:
# woops. apparently file is smaller than what we want
# to step back, go to the beginning instead
f.seek(0)
pos = f.tell()
lines = f.read().splitlines()
if len(lines) >= to_read or pos == 0:
return lines[-to_read:offset and -offset or None], \
len(lines) > to_read or pos > 0
avg_line_length *= 1.3
他のヒント
これはあなたよりも速いかもしれません。行の長さについては想定していません。正しい数の「\ n」文字が見つかるまで、ファイルを1ブロックずつ戻します。
def tail( f, lines=20 ):
total_lines_wanted = lines
BLOCK_SIZE = 1024
f.seek(0, 2)
block_end_byte = f.tell()
lines_to_go = total_lines_wanted
block_number = -1
blocks = [] # blocks of size BLOCK_SIZE, in reverse order starting
# from the end of the file
while lines_to_go > 0 and block_end_byte > 0:
if (block_end_byte - BLOCK_SIZE > 0):
# read the last block we haven't yet read
f.seek(block_number*BLOCK_SIZE, 2)
blocks.append(f.read(BLOCK_SIZE))
else:
# file too small, start from begining
f.seek(0,0)
# only read what was not read
blocks.append(f.read(block_end_byte))
lines_found = blocks[-1].count('\n')
lines_to_go -= lines_found
block_end_byte -= BLOCK_SIZE
block_number -= 1
all_read_text = ''.join(reversed(blocks))
return '\n'.join(all_read_text.splitlines()[-total_lines_wanted:])
実際の問題として、そのようなことを決して知ることができない場合、行の長さについてのトリッキーな仮定は好きではありません。
通常、これにより、ループの最初または2回目のパスで最後の20行が検索されます。 74文字のものが実際に正確である場合、ブロックサイズを2048にし、ほぼ20行をすぐにテールします。
また、物理的なOSブロックとの調整を行おうとして多くの脳カロリーを消費しません。これらの高レベルのI / Oパッケージを使用すると、OSブロックの境界に合わせようとすることでパフォーマンスが低下することを疑います。下位レベルのI / Oを使用する場合、速度が向上する可能性があります。
Python 2で実行できるUNIXライクシステムを想定しています:
import os
def tail(f, n, offset=0):
stdin,stdout = os.popen2("tail -n "+n+offset+" "+f)
stdin.close()
lines = stdout.readlines(); stdout.close()
return lines[:,-offset]
Python 3の場合:
import subprocess
def tail(f, n, offset=0):
proc = subprocess.Popen(['tail', '-n', n + offset, f], stdout=subprocess.PIPE)
lines = proc.stdout.readlines()
return lines[:, -offset]
ファイル全体を読み取ることが許容される場合は、dequeを使用します。
from collections import deque
deque(f, maxlen=n)
2.6より前では、dequeにはmaxlenオプションがありませんでしたが、実装するのは簡単です。
import itertools
def maxque(items, size):
items = iter(items)
q = deque(itertools.islice(items, size))
for item in items:
del q[0]
q.append(item)
return q
ファイルを最後から読み込む必要がある場合は、ギャロップ(別名指数)検索を使用します。
def tail(f, n):
assert n >= 0
pos, lines = n+1, []
while len(lines) <= n:
try:
f.seek(-pos, 2)
except IOError:
f.seek(0)
break
finally:
lines = list(f)
pos *= 2
return lines[-n:]
これが私の答えです。純粋なパイソン。 timeitを使用すると、かなり高速に見えます。 100,000行のログファイルの100行の末尾:
>>> timeit.timeit('tail.tail(f, 100, 4098)', 'import tail; f = open("log.txt", "r");', number=10)
0.0014600753784179688
>>> timeit.timeit('tail.tail(f, 100, 4098)', 'import tail; f = open("log.txt", "r");', number=100)
0.00899195671081543
>>> timeit.timeit('tail.tail(f, 100, 4098)', 'import tail; f = open("log.txt", "r");', number=1000)
0.05842900276184082
>>> timeit.timeit('tail.tail(f, 100, 4098)', 'import tail; f = open("log.txt", "r");', number=10000)
0.5394978523254395
>>> timeit.timeit('tail.tail(f, 100, 4098)', 'import tail; f = open("log.txt", "r");', number=100000)
5.377126932144165
コードは次のとおりです:
import os
def tail(f, lines=1, _buffer=4098):
"""Tail a file and get X lines from the end"""
# place holder for the lines found
lines_found = []
# block counter will be multiplied by buffer
# to get the block size from the end
block_counter = -1
# loop until we find X lines
while len(lines_found) < lines:
try:
f.seek(block_counter * _buffer, os.SEEK_END)
except IOError: # either file is too small, or too many lines requested
f.seek(0)
lines_found = f.readlines()
break
lines_found = f.readlines()
# we found enough lines, get out
# Removed this line because it was redundant the while will catch
# it, I left it for history
# if len(lines_found) > lines:
# break
# decrement the block counter to get the
# next X bytes
block_counter -= 1
return lines_found[-lines:]
上記のS.Lottの答えはほとんど私にとってはうまくいきますが、最終的には部分的な線を与えてしまいます。データは読み取りブロックを逆の順序で保持するため、ブロック境界上のデータが破損することがわかります。 '' .join(data)が呼び出されると、ブロックの順序が間違っています。これで修正されます。
def tail(f, window=20):
"""
Returns the last `window` lines of file `f` as a list.
f - a byte file-like object
"""
if window == 0:
return []
BUFSIZ = 1024
f.seek(0, 2)
bytes = f.tell()
size = window + 1
block = -1
data = []
while size > 0 and bytes > 0:
if bytes - BUFSIZ > 0:
# Seek back one whole BUFSIZ
f.seek(block * BUFSIZ, 2)
# read BUFFER
data.insert(0, f.read(BUFSIZ))
else:
# file too small, start from begining
f.seek(0,0)
# only read what was not read
data.insert(0, f.read(bytes))
linesFound = data[0].count('\n')
size -= linesFound
bytes -= BUFSIZ
block -= 1
return ''.join(data).splitlines()[-window:]
mmapを使用したシンプルで高速なソリューション:
import mmap
import os
def tail(filename, n):
"""Returns last n lines from the filename. No exception handling"""
size = os.path.getsize(filename)
with open(filename, "rb") as f:
# for Windows the mmap parameters are different
fm = mmap.mmap(f.fileno(), 0, mmap.MAP_SHARED, mmap.PROT_READ)
try:
for i in xrange(size - 1, -1, -1):
if fm[i] == '\n':
n -= 1
if n == -1:
break
return fm[i + 1 if i else 0:].splitlines()
finally:
fm.close()
挿入せずに&amp;を追加する、よりクリーンなpython3互換バージョン。逆:
def tail(f, window=1):
"""
Returns the last `window` lines of file `f` as a list of bytes.
"""
if window == 0:
return b''
BUFSIZE = 1024
f.seek(0, 2)
end = f.tell()
nlines = window + 1
data = []
while nlines > 0 and end > 0:
i = max(0, end - BUFSIZE)
nread = min(end, BUFSIZE)
f.seek(i)
chunk = f.read(nread)
data.append(chunk)
nlines -= chunk.count(b'\n')
end -= nread
return b'\n'.join(b''.join(reversed(data)).splitlines()[-window:])
次のように使用します:
with open(path, 'rb') as f:
last_lines = tail(f, 3).decode('utf-8')
上記のPopenが最適なソリューションであることがわかりました。それは迅速で汚れており、動作します Unixマシン上のPython 2.6の場合、次を使用しました
def GetLastNLines(self, n, fileName):
"""
Name: Get LastNLines
Description: Gets last n lines using Unix tail
Output: returns last n lines of a file
Keyword argument:
n -- number of last lines to return
filename -- Name of the file you need to tail into
"""
p=subprocess.Popen(['tail','-n',str(n),self.__fileName], stdout=subprocess.PIPE)
soutput,sinput=p.communicate()
return soutput
soutputには、コードの最後のn行が含まれます。行ごとにsoutputを反復処理するには:
for line in GetLastNLines(50,'myfile.log').split('\n'):
print line
@papercraneソリューションをpython3に更新します。
open(filename、 'rb')
および:
def tail(f, window=20):
"""Returns the last `window` lines of file `f` as a list.
"""
if window == 0:
return []
BUFSIZ = 1024
f.seek(0, 2)
remaining_bytes = f.tell()
size = window + 1
block = -1
data = []
while size > 0 and remaining_bytes > 0:
if remaining_bytes - BUFSIZ > 0:
# Seek back one whole BUFSIZ
f.seek(block * BUFSIZ, 2)
# read BUFFER
bunch = f.read(BUFSIZ)
else:
# file too small, start from beginning
f.seek(0, 0)
# only read what was not read
bunch = f.read(remaining_bytes)
bunch = bunch.decode('utf-8')
data.insert(0, bunch)
size -= bunch.count('\n')
remaining_bytes -= BUFSIZ
block -= 1
return ''.join(data).splitlines()[-window:]
投稿回答の要請に応サ月 私の答えは類似の問題 同一の技術を用いて変異の最終ラインのファイルだけでなく、取得します。
ファイルの著しいサイズ mmap
のではないかと思います。改善は、既存の mmap
答えは、このバージョンは携帯型のWindowsとLinuxでは、速いものではなく一部変更32ビットまたはPythonのファイルのGB範囲の その他の回答のヒントのお取り扱い、改造作業Python2).
import io # Gets consistent version of open for both Py2.7 and Py3.x
import itertools
import mmap
def skip_back_lines(mm, numlines, startidx):
'''Factored out to simplify handling of n and offset'''
for _ in itertools.repeat(None, numlines):
startidx = mm.rfind(b'\n', 0, startidx)
if startidx < 0:
break
return startidx
def tail(f, n, offset=0):
# Reopen file in binary mode
with io.open(f.name, 'rb') as binf, mmap.mmap(binf.fileno(), 0, access=mmap.ACCESS_READ) as mm:
# len(mm) - 1 handles files ending w/newline by getting the prior line
startofline = skip_back_lines(mm, offset, len(mm) - 1)
if startofline < 0:
return [] # Offset lines consumed whole file, nothing to return
# If using a generator function (yield-ing, see below),
# this should be a plain return, no empty list
endoflines = startofline + 1 # Slice end to omit offset lines
# Find start of lines to capture (add 1 to move from newline to beginning of following line)
startofline = skip_back_lines(mm, n, startofline) + 1
# Passing True to splitlines makes it return the list of lines without
# removing the trailing newline (if any), so list mimics f.readlines()
return mm[startofline:endoflines].splitlines(True)
# If Windows style \r\n newlines need to be normalized to \n, and input
# is ASCII compatible, can normalize newlines with:
# return mm[startofline:endoflines].replace(os.linesep.encode('ascii'), b'\n').splitlines(True)
これは、回線数、オスが十分小さいときに安全に読み取ることがすべて一度にメモリ;このままこの発電機能を手動で行を読み込み時の交換により最終ライン:
mm.seek(startofline)
# Call mm.readline n times, or until EOF, whichever comes first
# Python 3.2 and earlier:
for line in itertools.islice(iter(mm.readline, b''), n):
yield line
# 3.3+:
yield from itertools.islice(iter(mm.readline, b''), n)
最後に、この読み込みバイナリモードを使用する必要 mmap
)で str
ライン(Py2) bytes
ライン(Py3);したい場合 unicode
(Py2) str
(Py3の反復型アプローチできる工夫をデコードおよび/または修正改行:
lines = itertools.islice(iter(mm.readline, b''), n)
if f.encoding: # Decode if the passed file was opened with a specific encoding
lines = (line.decode(f.encoding) for line in lines)
if 'b' not in f.mode: # Fix line breaks if passed file opened in text mode
lines = (line.replace(os.linesep, '\n') for line in lines)
# Python 3.2 and earlier:
for line in lines:
yield line
# 3.3+:
yield from lines
注意:I型すべてのマシンがいがPythonです。教えてくださいまtypoedもの;このと同様に十分な 私の答え その 考え では、その届など取り扱いは、 offset
)この微妙な誤差.さんのコメントがあればすことはできません。
S.Lottの上位投票回答(08年9月25日21:43)に基づきますが、小さなファイル用に修正されました。
def tail(the_file, lines_2find=20):
the_file.seek(0, 2) #go to end of file
bytes_in_file = the_file.tell()
lines_found, total_bytes_scanned = 0, 0
while lines_2find+1 > lines_found and bytes_in_file > total_bytes_scanned:
byte_block = min(1024, bytes_in_file-total_bytes_scanned)
the_file.seek(-(byte_block+total_bytes_scanned), 2)
total_bytes_scanned += byte_block
lines_found += the_file.read(1024).count('\n')
the_file.seek(-total_bytes_scanned, 2)
line_list = list(the_file.readlines())
return line_list[-lines_2find:]
#we read at least 21 line breaks from the bottom, block by block for speed
#21 to ensure we don't get a half line
これが役立つことを願っています。
pypには、pipを使用してインストールできるtailの既存の実装がいくつかあります:
- mtFileUtil
- マルチテール
- log4tailer
- ...
状況によっては、これらの既存のツールのいずれかを使用する利点がある場合があります。
これは非常に単純な実装です:
with open('/etc/passwd', 'r') as f:
try:
f.seek(0,2)
s = ''
while s.count('\n') < 11:
cur = f.tell()
f.seek((cur - 10))
s = f.read(10) + s
f.seek((cur - 10))
print s
except Exception as e:
f.readlines()
シンプル:
with open("test.txt") as f:
data = f.readlines()
tail = data[-2:]
print(''.join(tail)
非常に大きなファイル(tailを使用する可能性があるログファイルの状況で一般的)で効率を上げるために、ファイル全体を一度にメモリに読み取らずにファイル全体を読み取らないようにするのが一般的です、何らかの方法で文字ではなく行でオフセットを計算する必要があります。 1つの可能性は、文字ごとにseek()で逆方向に読み取ることですが、これは非常に遅いです。代わりに、大きなブロックで処理する方が適切です。
ここで使用できるファイルを逆読みするために少し前に書いたユーティリティ関数を持っています。
import os, itertools
def rblocks(f, blocksize=4096):
"""Read file as series of blocks from end of file to start.
The data itself is in normal order, only the order of the blocks is reversed.
ie. "hello world" -> ["ld","wor", "lo ", "hel"]
Note that the file must be opened in binary mode.
"""
if 'b' not in f.mode.lower():
raise Exception("File must be opened using binary mode.")
size = os.stat(f.name).st_size
fullblocks, lastblock = divmod(size, blocksize)
# The first(end of file) block will be short, since this leaves
# the rest aligned on a blocksize boundary. This may be more
# efficient than having the last (first in file) block be short
f.seek(-lastblock,2)
yield f.read(lastblock)
for i in range(fullblocks-1,-1, -1):
f.seek(i * blocksize)
yield f.read(blocksize)
def tail(f, nlines):
buf = ''
result = []
for block in rblocks(f):
buf = block + buf
lines = buf.splitlines()
# Return all lines except the first (since may be partial)
if lines:
result.extend(lines[1:]) # First line may not be complete
if(len(result) >= nlines):
return result[-nlines:]
buf = lines[0]
return ([buf]+result)[-nlines:]
f=open('file_to_tail.txt','rb')
for line in tail(f, 20):
print line
[編集]より具体的なバージョンを追加しました(2回逆にする必要がありません)
f.seek(0、2)を使用してファイルの最後に移動し、readline()を次のように置き換えて1行ずつ読み取ることができます。
def readline_backwards(self, f):
backline = ''
last = ''
while not last == '\n':
backline = last + backline
if f.tell() <= 0:
return backline
f.seek(-1, 1)
last = f.read(1)
f.seek(-1, 1)
backline = last
last = ''
while not last == '\n':
backline = last + backline
if f.tell() <= 0:
return backline
f.seek(-1, 1)
last = f.read(1)
f.seek(-1, 1)
f.seek(1, 1)
return backline
Eyecueの回答(10年6月10日21:28)に基づく:このクラスは、head()およびtail()メソッドをファイルオブジェクトに追加します。
class File(file):
def head(self, lines_2find=1):
self.seek(0) #Rewind file
return [self.next() for x in xrange(lines_2find)]
def tail(self, lines_2find=1):
self.seek(0, 2) #go to end of file
bytes_in_file = self.tell()
lines_found, total_bytes_scanned = 0, 0
while (lines_2find+1 > lines_found and
bytes_in_file > total_bytes_scanned):
byte_block = min(1024, bytes_in_file-total_bytes_scanned)
self.seek(-(byte_block+total_bytes_scanned), 2)
total_bytes_scanned += byte_block
lines_found += self.read(1024).count('\n')
self.seek(-total_bytes_scanned, 2)
line_list = list(self.readlines())
return line_list[-lines_2find:]
使用法:
f = File('path/to/file', 'r')
f.head(3)
f.tail(3)
これらのソリューションのいくつかは、ファイルが\ nで終わらない場合、または最初の行全体が確実に読み取られるようにする場合に問題があります。
def tail(file, n=1, bs=1024):
f = open(file)
f.seek(-1,2)
l = 1-f.read(1).count('\n') # If file doesn't end in \n, count it anyway.
B = f.tell()
while n >= l and B > 0:
block = min(bs, B)
B -= block
f.seek(B, 0)
l += f.read(block).count('\n')
f.seek(B, 0)
l = min(l,n) # discard first (incomplete) line if l > n
lines = f.readlines()[-l:]
f.close()
return lines
ファイルの最後の行から特定の値を読み取る必要があり、このスレッドにつまずきました。 Pythonでホイールを再発明するのではなく、私は小さなシェルスクリプトを作成しました。 / usr / local / bin / get_last_netp:
#! /bin/bash
tail -n1 /home/leif/projects/transfer/export.log | awk {'print $14'}
そしてPythonプログラムで:
from subprocess import check_output
last_netp = int(check_output("/usr/local/bin/get_last_netp"))
dequeを使用した最初の例ではなく、より単純な例。これは一般的なものです。ファイルだけでなく、反復可能なオブジェクトで動作します。
#!/usr/bin/env python
import sys
import collections
def tail(iterable, N):
deq = collections.deque()
for thing in iterable:
if len(deq) >= N:
deq.popleft()
deq.append(thing)
for thing in deq:
yield thing
if __name__ == '__main__':
for line in tail(sys.stdin,10):
sys.stdout.write(line)
This is my version of tailf
import sys, time, os
filename = 'path to file'
try:
with open(filename) as f:
size = os.path.getsize(filename)
if size < 1024:
s = size
else:
s = 999
f.seek(-s, 2)
l = f.read()
print l
while True:
line = f.readline()
if not line:
time.sleep(1)
continue
print line
except IOError:
pass
import time
attemps = 600
wait_sec = 5
fname = "YOUR_PATH"
with open(fname, "r") as f:
where = f.tell()
for i in range(attemps):
line = f.readline()
if not line:
time.sleep(wait_sec)
f.seek(where)
else:
print line, # already has newline
import itertools
fname = 'log.txt'
offset = 5
n = 10
with open(fname) as f:
n_last_lines = list(reversed([x for x in itertools.islice(f, None)][-(offset+1):-(offset+n+1):-1]))
abc = "2018-06-16 04:45:18.68"
filename = "abc.txt"
with open(filename) as myFile:
for num, line in enumerate(myFile, 1):
if abc in line:
lastline = num
print "last occurance of work at file is in "+str(lastline)
これを行うことができる非常に便利なモジュールがあります:
from file_read_backwards import FileReadBackwards
with FileReadBackwards("/tmp/file", encoding="utf-8") as frb:
# getting lines by lines starting from the last line up
for l in frb:
print(l)
考え直してみると、これはおそらくここにあるものと同じくらい速いでしょう。
def tail( f, window=20 ):
lines= ['']*window
count= 0
for l in f:
lines[count%window]= l
count += 1
print lines[count%window:], lines[:count%window]
はるかに簡単です。そして、それは良いペースで引き裂かれるように見えます。
ファイルの最初または最後のN行を見つける最も簡単な方法を見つけました
ファイルの最後のN行(例:N = 10)
file=open("xyz.txt",'r")
liner=file.readlines()
for ran in range((len(liner)-N),len(liner)):
print liner[ran]
ファイルの最初のN行(例:N = 10)
file=open("xyz.txt",'r")
liner=file.readlines()
for ran in range(0,N+1):
print liner[ran]
とても簡単です:
def tail(fname,nl):
with open(fname) as f:
data=f.readlines() #readlines return a list
print(''.join(data[-nl:]))
これは実際には大きなファイルでは効率的ではありませんが、このコードは非常に単純です:
- ファイルオブジェクト
f
を読み取ります。 - 改行
\ n
を使用して、返された文字列を分割します。 -
最後のインデックスを表すマイナス記号を使用して、最後のインデックスを配列リストで取得し、サブ配列を取得するには
:
を使用します。
def tail(f,n): return "\n".join(f.read().split("\n")[-n:])