ビット単位演算子を使用して、符号なし整数(長さ2バイト)から符号なしchar変数に値を保存しますか?
-
06-07-2019 - |
質問
命令は1rxyでしたか? 1RXY-レジスタRにメモリアドレスXYの値をロードします
#include <stdio.h>
unsigned char r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,ra,rb,rc,rd,re,rf;
void reg_check(unsigned char reg);
void rxy1(unsigned char reg, unsigned char val);
int main(){
unsigned char memloc1=0x14;
unisgned char memloc2=0x04;
unsigned char temp,reg,val_add;
temp=(x && 0xFF00) >> 8;
if (temp = 0xB){
reg=(memloc1 &0x0F);
val_add=memloc2;
rxy1(reg,val_add);
}
return 0;
}
void reg_check(unsigned char reg){
}
void rxy1(unsigned char reg, unsigned char val){
実際の命令は0x1404で、これはmemloc1とmemloc2の2バイトに分割されます。 1rxyの形式によると、「at」という値を置くことを意味します。レジスタrのメモリ位置xy。
レジスタ4または unsigned char r4
は、他の数値を保持するメモリ位置0x04に値を保持する必要があります。
質問は、「r」を決定してレジスタ変数をテストする方法です。または1 "4" 04の1 "r" xyで、位置xyに保持されている値を符号なしchar変数 r4
たとえば、メモリロケーション 0x04
が 0xFB
を保持していた場合。
これが理にかなっていることを願っています。
[編集] 例
#include <stdio.h>
int main(){
unsigned char r0,r2,r3,r4;
unsigned char mem1=0x14; //at lmemory address 00
unsigned char mem2=0x04; //at lmemory address 01
unsigned char reg_val_store=mem1 & 0x0F;
if( ((mem1= & 0xF0) >> 4) == 0x1){
if (reg_val_store == 0x4){
//then put value store at memory address "04" into register 4.
//and just say for example "0xFD" was at memory location "04"
//since register value is 4 from the instruction read in 0x1"4"04
//i want to put 0xFD in the r4 unsigned char variable, how do i do this?
r4=0xFD; // this is of course correct but the instruction read in changes and
// so does the register variable. how do i modify my code for this change?
}
}
return 0;
}
解決
正しく理解できたら、B4をメモリ[0]に、04をメモリ[1]に入れます。私は正しいですか?
これはそれを行います。
memory[0] = ((x & 0xFF00) >> 8 ); //Will put B4 in memory[0]
memory[1] = (x & 0xFF); //Will put 04 in memory[1]
次に、メモリ[0]でBと4を別々にチェックして、次のステップに進みたいと思います。そうですか
(memory[0] & 0xF0) >> 4 // will give you 0xB
(memory[0] & 0x0F) //will give you 0x4
これはあなたが探しているものですか?
更新:読書の問題については、これを使用する必要があります。
while (!feof(f))
{
fscanf(f,"%X",&inst[i]);
i++;
}
これはEOFまで読み込まれます。このループの後にi値を使用して、読み込まれた命令の数を確認し、n_instrなどの変数に格納できます。そして、「throをループする」ためにこれを使うことができます
while(loop<n_instr) //instead of just loop<80
{
memory[j] = ((inst[loop] & 0xFF00) >> 8 );
j=j+2;
memory[k] = (inst[loop] & 0x00FF);
k=k+2;
loop++;
}
所属していません StackOverflow