JAX-WS 소모 웹 서비스에 WS-보안 및 WS-Addressing
-
22-08-2019 - |
문제
나을 개발하기 위해 노력하고 독립 Java web 서비스 클라이언트와 JAX-WS(지하철)에 사용하는 WS-Security 사용자 이름으로 토큰 인증(암호화,난스 및 타임스탬프)그리고 타임 스탬프 검증와 함께 WS-Addressing over SSL.
WSDL 제가 작업하를 정의하지 않는 어떠한 보안 정책 정보를 제공합니다.나는 할 수 없었을 정확히 파악하는 방법을 추가 이 헤더 정보(올바른 방법으로 할 때)WSDL 을 포함하지 않습니다.대부분의 예를 발견했을 사용하여 지하철의 주위에 회귀를 사용하여 Netbeans 자동으로 생성하려면 이에서 WSDL 도움이되지 않는다면 추천합니다.내가 보았으로 WSIT,XWSS,etc.없이 많은 명확성이나 방향입니다.JBoss WS 지하철 유망 보았지 많은 행운을 아직 찾을 수 있습니다.
누군가는 이러한 경험을 또는 제안이 있에서 이러한 작업을 수행하는 방법?도를 가리키는 나에게 올바른 방향으로 도움이 될 것입니다.나는 이에 제한되지 않는다는 특정의 기술보다 다른 이야 합 Java 기반으로합니다.
해결책
나는 끝까지 파악이 문제만에 갔을 다른 방향으로 그렇게했다.나의 솔루션을 사용하여 기술설 2.1 및 JAX-WS 구현,조합의 힘 기술설과 기존 스프링 인프라 내가 이미 있었습니다.처음에는 회의적이었기 때문에 다양한 항아리에 필요한 기술설,그러나 결국 그것이 제공하는 최고의 간단한 솔루션입니다.
에 적응하는 예제에서 서 처음으로 웹사이트에 대한 클라이언트 구성, 사용하는 사용자 정의 기술설 JAXWS 네임스페이스 내에서 봄과 사용되는 Interceptor 사용자 이름 토큰 인증(암호화,난스 및 타임스탬프)그리고 타임 스탬프를 확인합니다.만 다른 단계이 작품을 만드는 나의 자신의 비밀번호 콜백을 처리기에 대해 실행되는 각각의 아웃바운드 비누 요청을 합니다.
SSL 구성,내가 다시 돌아 기술설 및 SSL 지원을 통해 도관, 지만,나는 찾을 수 있습 SSL 정 http:conduit 이름을 사용하여 일반적인 목적은 하나 추천하지 않는 생산을 위한 환경입니다.
아래의 예는 내 config 파일에 있습니다.
봄 config 파일
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:jaxws="http://cxf.apache.org/jaxws"
xmlns:sec="http://cxf.apache.org/configuration/security"
xmlns:http="http://cxf.apache.org/transports/http/configuration"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:cxf="http://cxf.apache.org/core"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-2.5.xsd
http://cxf.apache.org/configuration/security http://cxf.apache.org/schemas/configuration/security.xsd
http://cxf.apache.org/transports/http/configuration http://cxf.apache.org/schemas/configuration/http-conf.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd
http://cxf.apache.org/jaxws http://cxf.apache.org/schemas/jaxws.xsd
http://cxf.apache.org/core http://cxf.apache.org/schemas/core.xsd">
<context:property-placeholder location="meta/my.properties" />
<context:component-scan base-package="com.foo" />
<import resource="remoting.xml" />
<jaxws:client id="myWebService" address="${my.endpointAddress}"
serviceClass="com.foo.my.ServicePortType">
<!-- Testing only, adds logging of entire message in and out -->
<jaxws:outInterceptors>
<ref bean="TimestampUsernameToken_Request" />
<ref bean="logOutbound" />
</jaxws:outInterceptors>
<jaxws:inInterceptors>
<ref bean="logInbound" />
</jaxws:inInterceptors>
<jaxws:inFaultInterceptors>
<ref bean="logOutbound" />
</jaxws:inFaultInterceptors>
<!-- Production settings -->
<!--
<jaxws:outInterceptors> <ref bean="TimestampUsernameToken_Request" />
</jaxws:outInterceptors>
-->
</jaxws:client >
<!--
CXF Interceptors for Inbound and Outbound messages
Used for logging and adding Username token / Timestamp Security Header to SOAP message
-->
<bean id="logInbound" class="org.apache.cxf.interceptor.LoggingInInterceptor" />
<bean id="logOutbound" class="org.apache.cxf.interceptor.LoggingOutInterceptor" />
<bean id="TimestampUsernameToken_Request" class="org.apache.cxf.ws.security.wss4j.WSS4JOutInterceptor">
<constructor-arg>
<map>
<entry key="action" value="UsernameToken Timestamp" />
<entry key="user" value="${my.group}.${my.userId}" />
<entry key="passwordType" value="PasswordDigest" />
<entry key="passwordCallbackClass" value="com.foo.my.ClientPasswordHandler" />
</map>
</constructor-arg>
</bean>
<!--
http:conduit namespace is used to configure SSL using keystores, etc
*.http-conduit works but CXF says its only supposed to be for temporary use (not production),
well until the correct way works, we're going to use it.
-->
<http:conduit name="*.http-conduit">
<http:tlsClientParameters
secureSocketProtocol="SSL">
<!--
<sec:trustManagers>
<sec:keyStore type="JKS"
password="${my.truststore.password}"
file="${my.truststore.file}" />
</sec:trustManagers>
-->
<sec:keyManagers keyPassword="${my.keystore.password}">
<sec:keyStore type="JKS"
password="${my.keystore.password}"
file="${my.keystore.file}" />
</sec:keyManagers>
<!-- Cipher suites filters specify the cipher suite to allow/disallow in SSL communcation -->
<sec:cipherSuitesFilter>
<sec:include>.*_WITH_3DES_.*</sec:include>
<sec:include>.*_EXPORT_.*</sec:include>
<sec:include>.*_EXPORT1024_.*</sec:include
<sec:include>.*_WITH_DES_.*</sec:include
<sec:exclude>.*_WITH_NULL_.*</sec:exclude
<sec:exclude>.*_DH_anon_.*</sec:exclude>
</sec:cipherSuitesFilter>
</http:tlsClientParameters>
</http:conduit>
</beans>
Java 클라이언트 비밀번호 처리기:
import java.io.IOException;
import javax.security.auth.callback.Callback;
import javax.security.auth.callback.CallbackHandler;
import javax.security.auth.callback.UnsupportedCallbackException;
import org.apache.log4j.Logger;
import org.apache.ws.security.WSPasswordCallback;
/**
* <p>
* Provides a callback handler for use processing outbound/inbound SOAP messages.
* ClientPasswordHandler sets the password used in the WS-Security UsernameToken
* SOAP header.
*
* </p>
*
* Created: Apr 1, 2009
* @author Jared Knipp
*
*/
public final class ClientPasswordHandler implements CallbackHandler {
protected static Logger log = Logger.getLogger(ClientPasswordHandler.class);
private static final PropertyManager PROPS = PropertyManager.getInstance();
private static String PASSWORD = PROPS.getPassword();
private static boolean IS_PASSWORD_CLEAR = PROPS.getIsClearPassword();
/**
* Client password handler call back. This method is used to provide
* additional outbound (or could be inbound also) message processing.
*
* Here the method sets the password used in the UsernameToken SOAP security header
* element in the SOAP header of the outbound message. For our purposes the clear
* text password is SHA1 hashed first before it is hashed again along with the nonce and
* current timestamp in the security header.
*/
public void handle(Callback[] callbacks) throws IOException, UnsupportedCallbackException {
if(log.isDebugEnabled()) { log.debug("Setting password for UsernameToken"); }
WSPasswordCallback pc = (WSPasswordCallback) callbacks[0];
// Check to see if the password is already Hashed via SHA1, if not then hash it first
if(IS_PASSWORD_CLEAR) {
synchronized(this) {
PASSWORD = PasswordDigestUtil.doPasswordDigest(PASSWORD);
IS_PASSWORD_CLEAR = false;
PROPS.setIsClearPassword(IS_PASSWORD_CLEAR);
PROPS.setPassword(PASSWORD);
PROPS.saveProperties();
}
}
pc.setPassword(PASSWORD);
}
}
다른 팁
항이 있는 경우에 없 WSDL,당신은 확실히 그것의 서비스에 의해 설명 WSDL?WSDL 제공하는 것을 의미하는 데 필요한 모든 정보를 설명하는 서비스를 포함한 보안 정책을 사용하는 데 필요한 서비스입니다.
어떤 플랫폼았다 WSDL 에서 오는가?가능 WSDL 지 않은 완전한 설명?예를 들어,그것은이 될 수 있는 WSDL 함d 에서 또 다른 WSDL 가 제공하 보안 정보가 들어 있습니다.
가 여기 게시물을 구성하는 방법을 설명하는 클라이언트와 서버에서 처음으로 WS-Security: JAX-WS 웹 서비스로 봄과 기술설