CMAKE를 사용하면 소스 내 빌드를 어떻게 비활성화 하시겠습니까?
문제
생성 된 cmake 파일로 소스 트리를 어지럽히는 것을 막고 싶습니다. Makefiles
CMAKE를 사용하는 것과 동일한 빌드 프로세스의 일부가 아닙니다. (묻지 않는 것이 가장 좋습니다)
이 작업을 수행 한 방법은 내 상단에 몇 줄을 갖는 것입니다. CMakeLists.txt
, 다음과 같이 :
if("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}")
message(SEND_ERROR "In-source builds are not allowed.")
endif("${PROJECT_SOURCE_DIR}" STREQUAL "${PROJECT_BINARY_DIR}")
그러나 이런 식으로하는 것은 너무 장점으로 보입니다. 또한, 소스 내 빌드를 시도하면 여전히 CMakeFiles/
디렉토리 및 CMakeCache.txt
오류가 발생하기 전에 소스 트리의 파일.
더 좋은 방법을 놓치고 있습니까?
해결책
나는 당신의 길을 좋아한다고 생각합니다. CMAKE 메일 링리스트는 이러한 유형의 질문에 잘 어울립니다.
참고로 : 디렉토리에 실패한 "CMake"실행 파일을 만들 수 있습니다. "여부"에 따라 그들의 길에 있습니다 (Linux). Symlink /bin /false도 할 수도 있습니다.
Windows에서는 현재 디렉토리의 파일이 먼저 발견되는지 확실하지 않습니다.
다른 팁
CMAKE에는 문서화되지 않은 두 가지 옵션이 있습니다.CMAKE_DISABLE_SOURCE_CHANGES
그리고 CMAKE_DISABLE_IN_SOURCE_BUILD
cmake_minimum_required (VERSION 2.8)
# add this options before PROJECT keyword
set(CMAKE_DISABLE_SOURCE_CHANGES ON)
set(CMAKE_DISABLE_IN_SOURCE_BUILD ON)
project (HELLO)
add_executable (hello hello.cxx)
-
andrew@manchester:~/src% cmake .
CMake Error at /usr/local/share/cmake-2.8/Modules/CMakeDetermineSystem.cmake:160 (FILE):
file attempted to write a file: /home/andrew/src/CMakeFiles/CMakeOutput.log
into a source directory.
/home/selivanov/cmake-2.8.8/source/cmmakefile.cxx
bool cmMakefile::CanIWriteThisFile(const char* fileName)
{
if ( !this->IsOn("CMAKE_DISABLE_SOURCE_CHANGES") )
{
return true;
}
// If we are doing an in-source build, than the test will always fail
if ( cmSystemTools::SameFile(this->GetHomeDirectory(),
this->GetHomeOutputDirectory()) )
{
if ( this->IsOn("CMAKE_DISABLE_IN_SOURCE_BUILD") )
{
return false;
}
return true;
}
// Check if this is subdirectory of the source tree but not a
// subdirectory of a build tree
if ( cmSystemTools::IsSubDirectory(fileName,
this->GetHomeDirectory()) &&
!cmSystemTools::IsSubDirectory(fileName,
this->GetHomeOutputDirectory()) )
{
return false;
}
return true;
}
같은 함수를 포함하십시오 이 하나. 이러한 차이점으로하는 것과 유사합니다.
함수에 캡슐화되며, 포함 할 때 호출됩니다.
PreventInSourceBuilds.cmake
기준 치수. 주요 cmakelists.txt는 다음을 포함해야합니다.set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/CMake) include(PreventInSourceBuilds)
사용합니다 get_filename_component () 경로를 비교하기 전에 Symlinks를 해결하는 RealPath 매개 변수를 사용합니다.
GitHub 링크가 변경되면 여기에 모듈 소스 코드가 있습니다 ( PreventInSouceBuilds.cmake
, 호출 된 디렉토리에서 CMake
, 위의 예에서) :
#
# This function will prevent in-source builds
function(AssureOutOfSourceBuilds)
# make sure the user doesn't play dirty with symlinks
get_filename_component(srcdir "${CMAKE_SOURCE_DIR}" REALPATH)
get_filename_component(bindir "${CMAKE_BINARY_DIR}" REALPATH)
# disallow in-source builds
if("${srcdir}" STREQUAL "${bindir}")
message("######################################################")
message("# ITK should not be configured & built in the ITK source directory")
message("# You must run cmake in a build directory.")
message("# For example:")
message("# mkdir ITK-Sandbox ; cd ITK-sandbox")
message("# git clone http://itk.org/ITK.git # or download & unpack the source tarball")
message("# mkdir ITK-build")
message("# this will create the following directory structure")
message("#")
message("# ITK-Sandbox")
message("# +--ITK")
message("# +--ITK-build")
message("#")
message("# Then you can proceed to configure and build")
message("# by using the following commands")
message("#")
message("# cd ITK-build")
message("# cmake ../ITK # or ccmake, or cmake-gui ")
message("# make")
message("#")
message("# NOTE: Given that you already tried to make an in-source build")
message("# CMake have already created several files & directories")
message("# in your source tree. run 'git status' to find them and")
message("# remove them by doing:")
message("#")
message("# cd ITK-Sandbox/ITK")
message("# git clean -n -d")
message("# git clean -f -d")
message("# git checkout --")
message("#")
message("######################################################")
message(FATAL_ERROR "Quitting configuration")
endif()
endfunction()
AssureOutOfSourceBuilds()
나는있다 cmake()
내 쉘 기능 .bashrc
/.zshrc
이것과 유사합니다 :
function cmake() {
# Don't invoke cmake from the top-of-tree
if [ -e "CMakeLists.txt" ]
then
echo "CMakeLists.txt file present, cowardly refusing to invoke cmake..."
else
/usr/bin/cmake $*
fi
}
나는이 낮은 의식 솔루션을 선호합니다. 우리가 Cmake로 전환했을 때 동료의 가장 큰 불만을 없애지 만 사람들이있는 사람들을 막을 수는 없습니다. 진짜 소스/트리 톱 빌드를 수행하고 싶다. /usr/bin/cmake
직접 (또는 래퍼 기능을 사용하지 않음). 그리고 그것은입니다 멍청한 단순한.
.bashrc 파일과 같은 구성을 구성 할 수 있습니다 이 하나
기능을보십시오 cmakekde 그리고 Kdebuild. 빌드 및 SRC Env를 설정하십시오. 귀하의 요구에 따라 변수 및 이러한 기능을 편집하십시오. 이것은 만 구축됩니다 빌드 디르 보다는 srcdir
Linux의 사람들을 위해 :
최상위 cmakelists.txt에 추가하십시오 :
set(CMAKE_DISABLE_IN_SOURCE_BUILD ON)
최상위 수준에서 'dotme'파일을 만들거나 .bashrc (전 세계)에 추가하십시오.
#!/bin/bash
cmk() { if [ ! -e $1/CMakeLists.txt ] || ! grep -q "set(CMAKE_DISABLE_IN_SOURCE_BUILD ON)" $1/CMakeLists.txt;then /usr/bin/cmake $*;else echo "CMAKE_DISABLE_IN_SOURCE_BUILD ON";fi }
alias cmake=cmk
이제 실행 :
. ./dotme
최상위 소스 트리에서 CMAKE를 실행하려고 할 때 :
$ cmake .
CMAKE_DISABLE_IN_SOURCE_BUILD ON
cmakefiles/ 또는 cmakecache.txt가 생성되지 않습니다.
소스 외 빌드를 수행 할 때 CMAKE를 처음 실행 해야하는 경우 실제 실행 파일에 전화하십시오.
$ cd build
$ /usr/bin/cmake ..
빌드를 수행하는 사람/프로세스에서 디렉토리를 읽으십시오. 소스 컨트롤에서 디렉토리를 체크 아웃하는 별도의 프로세스가있어 (소스 컨트롤을 사용하고 있습니다.) 읽기 전용으로 만듭니다.