I'm trying to implement a PIC32 MCU as a Audio device, using USB audio class 1.
I have implementet this project: PIC32 USB Digital Audio Accesory Board Demos.zip
and it works fine, but now i want to cut away some of the Audio Control Interface, so i'm having a more simple Audio function:
The device seems to get enumerated properly acording to the status LED's on the board, and it appears in Device Manager's list of audio devices, but it has a small yellow exclamation mark.. And when i plug in the device, windows tells me: "Device driver software was not succesfully installed"
Anybody has a clue?
USB descriptors, block of code:
ROM BYTE configDescriptor1[] ={
//CD
0x09, // Size : 9 Bytes
0x02, // Configuration Descriptor (0x02)
//0xE4, // Total length in bytes of data returned Includes the combined length of all descriptors (configuration, interface, endpoint, and class- or vendor-specific) returned for this configuration.
0xB4, // Ved simpel Audio Function
0x00, // 2. Byte af Total Length // 228
0x03, // Number of Interfaces: 3
0x01, // bConfigurationValue, Value to use as an argument to select this configuration
0x00, // iConfiguration, Index of String Descriptor describing this configuration
_DEFAULT | _SELF, // bmAttributes, 0b01100000 -> D6: Self-powered, D7: Reserved (set to one)
0xFA, // Maximum Power : 250 * 2mA = 0,5A
//ID - INTERFACE 0 Control
0x09, // Size : 9 Bytes
0x04, // Interface Descriptor (0x04)
0x00, // Number of Interface: Interface nr 0
0x00, // Value used to select alternative setting
0x00, // Number of Endpoints used for this interface, 0
0x01, // Class Code (Assigned by USB Org), AUDIO
0x01, // Subclass Code (Assigned by USB Org), AUDIOCONTROL
0x00, // Protocol Code (Assigned by USB Org)
0x00, // Index of String Descriptor Describing this interface
//ACID - HEADER
0x0A, // Size : 10 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x01, // HEADER descriptor subtype
0x00,0x01, // Audio Device compliant to the USB Audio specification version 1.00
//0x64,0x00, // 100 bytes - Total number of bytes returned for the class-specific AudioControl interface descriptor. // Includes the combined length of this descriptor header and all Unit and Terminal descriptors.
0x00,0x34, // wTotalLength
0x02, // bInCollection -> Number of streaming interfaces = 2
0x01, // baInterfaceNr(1) -> 0x01 = 1 -> Interface number of the first AudioStreaming interface in the Collection
0x02, // baInterfaceNr(2) -> 0x02 = 2 -> Interface number of the second AudioStreaming interface in the Collection
//ACID - INPUT_TERMINAL ID = 1
0x0C, // size : 12 bytes
0x24, // CS_INTERFACE Descriptor Type
0x02, // INPUT_TERMINAL - Descriptor subtype = 2
0x01, // ID of this Input Terminal. // Constant uniquely identifying the Terminal within the audio function.
0x01,0x01, // wTerminalType -> 0x0101 = USB streamming
0x00, // bAssocTerminal -> 0x00 = No association.
//0x03, // bAssocTerminal -> 0x03 = Associated with OUTPUT TERMINAL 3
0x02, // bNrChannels -> 0x02 two channel.
0x03,0x00, // wChannelConfig -> 0x0003 = stereo, Right / Left // se Audio Devices Dok side 34
//0x00,0x00, // wChannelConfig -> 0x0000 = mono ?
0x00, // iChannelNames -> 0x00 = Unused.
0x00, // iTerminal -> 0x00 = Unused.
//ACID - INPUT_TERMINAL ID = 4
0x0C, // size : 12 bytes
0x24, // CS_INTERFACE Descriptor Type
0x02, // INPUT_TERMINAL - Descriptor subtype
0x04, // bTerminalID -> ID of this Input Terminal = 4
0x01,0x02, // wTerminalType -> 0x0201 = Microphone
0x00, // bAssocTerminal -> 0x00 = No association.
//0x06, // bAssocTerminal -> 0x06 = Associated with OUTPUT TERMINAL 6
0x01, // bNrChannels -> 0x01 one channel.
0x01,0x00, // wChannelConfig -> Left Front <- original fra ex.
//0x00,0x00, // wChannelConfig -> 0x0000 = mono
0x00, // iChannelNames -> 0x00 = Unused.
0x00, // iTerminal -> 0x00 = Unused.
//ACID - OUTPUT_TERMINAL ID = 3
0x09, // size : 9 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x03, // OUTPUT_TERMINAL - Descriptor subtype
0x03, // bTerminalID -> ID of this Output Terminal = 3
0x01,0x03, // wTerminalType -> 0x0301 = Speaker
0x00, // bAssocTerminal -> 0x00 = Unused
//0x01, // bAssocTerminal -> 0x01 = Associated with INPUT TERMINAL 1
//0x02, // bSourceID -> 0x02 = From FEATURE_UNIT ID 2 = USB stream
0x01, // bSourceID -> 0x01 = From Input Terminal ID 1
0x00, // iTerminal -> 0x00 = Unused.
//ACID - OUTPUT_TERMINAL ID = 6
0x09, // Size : 9 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x03, // OUTPUT_TERMINAL - Descriptor subtype
0x06, // bTerminalID -> ID of this Output Terminal = 6
0x01,0x01, // wTerminalType -> 0x0101 = USB streaming
0x00, // bAssocTerminal -> 0x00 = Unused
//0x04, // bAssocTerminal -> 0x04 = Associated with INPUT TERMINAL 4
//0x09, // bSourceID -> 0x09 = From Selector Unit ID 9
0x04, // bSourceID -> 0x04 = From INPUT_TERMINAL ID 4
0x00, // iTerminal -> 0x00 = Unused.
/* ##### INTERFACE 1 - OUT ##### */
//ID - INTERFACE 1/0 Stream
0x09, // Size : 9 Bytes
0x04, // Interface Descriptor (0x04)
0x01, // bInterfaceNumber -> 0x01 Interface ID = 1 Number of this interface. Zero-based value identifying the index in the array of concurrent interfaces supported by this configuration.
0x00, // bAlternateSetting -> 0x00 = index of this interface's alternate setting
0x00, // bNumEndpoints -> 0x00 = 0 Endpoints to this interface
0x01, // bInterfaceClass -> 0x01 = Audio Interface
0x02, // bInterfaceSubclass -> 0x02 = AUDIO_STREAMING
0x00, // bInterfaceProtocol -> 0x00 = Unused
0x00, // iInterface -> 0x00 = Unused
//ID - INTERFACE 1/1 Stream
0x09, // Size : 9 Bytes
0x04, // Interface Descriptor (0x04)
0x01, // bInterfaceNumber -> 0x01 Interface ID = 1
0x01, // bAlternateSetting -> 0x01 = index of this interface's alternate setting
0x01, // bNumEndpoints -> 0x01 = 1 Endpoints to this interface
0x01, // bInterfaceClass -> 0x01 = Audio Interface
0x02, // bInterfaceSubclass -> 0x02 = AUDIO_STREAMING
0x00, // bInterfaceProtocol -> 0x00 = Unused
0x00, // iInterface -> 0x00 = Unused
//ASID - GENERAL
0x07, // Size : 7 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x01, // bDescriptorSubtype -> 0x01 = GENERAL subtype
0x01, // bTerminalLink -> 0x01 = The Terminal ID of the Terminal to which the endpoint of this interface is connected.
0x01, // bDelay -> 0x01 = Delay (delta) introduced by the data path (see Section 3.4, ?Inter Channel Synchronization? - in Audio Devices). Expressed in number of frames.
0x01,0x00, // wFormatTag -> 0x0001 = PCM
//ASID - FORMAT_TYPE
0x0E, // Size : 14 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x02, // bDescriptorSubtype -> 0x02 = FORMAT_TYPE
0x01, // bFormatType -> 0x01 = FORMAT_TYPE_I -> ref: A.1.1 Audio Data Format Type I Codes -> Audio Data Format Dok
0x02, // bNrChannels -> 0x02 = Two channels
0x02, // bSubFrameSize -> 0x02 = 2 bytes pr audio subframe
0x10, // bBitResolution -> 0x10 = 16 bit pr sample
0x02, // bSamFreqType -> 0x02 = 2 sample frequencies supported
0x80,0xBB,0x00, // tSamFreq -> 0xBB80 = 48000 Hz
0x00,0x7D,0x00, // tSamFreq -> 0x7D00 = 32000 Hz
//0x44,0xAC,0x00,
//ED - ENDPOINT OUT
0x09, // Size : 9 Bytes
0x05, // 0x05 -> ENDPOINT Descriptor Type
0x01, // bEndpointAddress -> 0x01 = adress 1, OUT, -> ref 9.6.6 Endpoint -> usb_20 Dok
0x09, // bmAttributes -> 0b00001001 -> Bits 0-1 = 01 = Isochronous , Bits 2-3 = 10 = Adaptive
AUDIO_MAX_SAMPLES * sizeof ( AUDIO_PLAY_SAMPLE ), 0x00, // wMaxPacketSize -> 48 * 4 = 0x0030 :Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected.
0x01, // bInterval -> 0x01 = 1 millisecond
0x00, // ?? not described -> 0x00 = Unused
0x00, // ?? not described -> 0x00 = Unused
//CSED - CS ENDPOINT
0x07, // Size : 7 Bytes
0x25, // CS_ENDPOINT
0x01, // bDescriptorSubtype -> 0x01 = GENERAL
0x01, // bmAttributes -> 0b00000001 = Bit 1 = 1 => Sample Freq Control is supported by this endpoint
0x00, // bLockDelayUnits -> 0x00 = Indicates the units used for the wLockDelay field: 0 = Undefined
0x00,0x00, // the time it takes this endpoint to reliably lock its internal clock recovery circuitry.
/* ##### INTERFACE 2 - IN ##### */
//ID - INTERFACE 2/0 Stream
0x09, // Size : 9 Bytes
0x04, // Interface Descriptor (0x04)
0x02, // bInterfaceNumber -> 0x02 Interface ID = 2
0x00, // bAlternateSetting -> 0x00 = Value used to select this alternate setting for the interface identified in the prior field
0x00, // bNumEndpoints -> 0x00 = 0 -> Number of endpoints used by this interface
0x01, // bInterfaceClass -> 0x01 = 1 = AUDIO
0x02, // bInterfaceSubClass -> 0x02 = AUDIO_STREAMING
0x00, // bInterfaceProtocol -> 0x00 = Unused
0x00, // iInterface -> 0x00 = Unused -> Index of string descriptor.
//ID - INTERFACE 2/1 Stream
0x09, // Size : 9 Bytes
0x04, // Interface Descriptor (0x04)
0x02, // bInterfaceNumber -> 0x02 Interface ID = 2
0x01, // bAlternateSetting -> 0x01 = Value used to select this alternate setting for the interface identified in the prior field
0x01, // bNumEndpoints -> 0x01 = 1 -> Number of endpoints used by this interface
0x01, // bInterfaceClass -> 0x01 = 1 = AUDIO
0x02, // bInterfaceSubClass -> 0x02 = AUDIO_STREAMING
0x00, // bInterfaceProtocol -> 0x00 = Unused
0x00, // iInterface -> 0x00 = Unused -> Index of string descriptor.
//ASID - GENERAL
0x07, // Size : 7 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x01, // GENERAL Descriptor
0x06, // bTerminalLink -> 0x06 = The Terminal ID of the Terminal to which the endpoint of this interface is connected = 6
0x01, // bDelay -> 0x01 = Delay (delta) introduced by the data path (see Section 3.4, ?Inter Channel Synchronization? - in Audio Devices). Expressed in number of frames.
0x01,0x00, // wFormatTag -> 0x0001 = PCM
//ASID - FORMAT_TYPE
0x0E, // Size : 14 Bytes
0x24, // CS_INTERFACE Descriptor Type
0x02, // bDescriptorSubtype -> 0x02 = FORMAT_TYPE
0x01, // bFormatType -> 0x01 = FORMAT_TYPE_I -> ref: A.1.1 Audio Data Format Type I Codes -> Audio Data Format Dok
0x02, // bNrChannels -> 0x02 = Two channels
0x02, // bSubFrameSize -> 0x02 = 2 bytes pr audio subframe
//0x03, // bSubFrameSize -> 0x03 = 3 bytes pr audio subframe
0x10, // bBitResolution -> 0x10 = 16 bit pr sample
//0x18, // bBitResolution -> 0x18 = 24 bit pr sample
0x02, // bSamFreqType -> 0x02 = 2 sample frequencies supported
0x80,0xBB,0x00, // tSamFreq -> 0xBB80 = 48000 Hz
0x00,0x7D,0x00, // tSamFreq -> 0x7D00 = 32000 Hz
//0x44,0xAC,0x00, // 44100 Hz
//ED - ENDPOINT IN
0x09, // Size : 9 Bytes
0x05, // 0x05 -> ENDPOINT Descriptor Type
0x82, // bEndpointAddress -> 0x82 = adress 2, IN, -> ref 9.6.6 Endpoint -> usb_20 Dok
0x05, // bmAttributes -> 0b00000101 -> Bits 0-1 = 01 = Isochronous , Bits 2-3 = 01 = Asynchronous
AUDIO_MAX_SAMPLES * (sizeof ( AUDIO_PLAY_SAMPLE )), 0x00, // wMaxPacketSize -> 48 * 4 = 0x0030 :Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected.
//0x20,0x01,
0x01, // bInterval -> 0x01 = 1 millisecond
0x00, // bRefresh -> ??
0x00, // bSynchAddress -> ??
//CSED - CS ENDPOINT
0x07, // Size : 7 Bytes
0x25, // bDescriptorType -> 0x25 = CS_ENDPOINT
0x01, // bDescriptorSubtype -> 0x01 = GENERAL
0x01, // bmAttributes -> 0b00000001 = Bit 1 = 1 => Sample Freq Control is supported by this endpoint
0x00, // bLockDelayUnits -> 0x00 = Indicates the units used for the wLockDelay field: 0 = Undefined
0x00,0x00, // the time it takes this endpoint to reliably lock its internal clock recovery circuitry
};
https://stackoverflow.com/questions/23519753
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
Russian
