在C调制解调器呼叫++

Question

我试图使调制解调器在电话的一端，而在另一端的程序应答呼叫。它似乎没有检测载波。难道我做错了什么？我缺少的东西吗？

int main(int argc, char** argv)
{
ParseArgs(argc,argv);

SerialPort* port = SerialPort::New();
if(!port)
    Error(ErrorNoMemory,"Can't create port");

int error = port->Open(PortNum, SendFlag);
if(error)
    Error(error,"Can't open port");

error = port->Initialise(PortBaud);
if(error)
    Error(error,"Can't initialise port");

if(ReceiveFlag)
{
    port->Listen();
    Receive(port); //after the call is stablished I send a file
}
else
{
    port->Dial(PhoneNumber);
     Send(port);
}
port->Close();
delete port;

return 0;
}

打开所述端口的一部分：

int Open(unsigned port, bool SendFlag)
{
// make name for port...
char name[] = "\\\\.\\com???.???";
char* nameNumber = name+sizeof(name)-8;
char* nameEnd = nameNumber;
if(port>999){
    return ErrorInvalidPort;
}
if(port>99)
{
    *nameEnd++ = '0'+port/100;
    port %= 100;
}
if(port>9)
{
    *nameEnd++ = '0'+port/10;
    port %= 10;
}
*nameEnd++ = '0'+port;
*nameEnd = 0;

// open port...
    hSerial = CreateFile(name, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL);

if(hSerial==INVALID_HANDLE_VALUE)
{
    switch(GetLastError())
    {
        case ERROR_FILE_NOT_FOUND:
            return ErrorInvalidPort;
        case ERROR_ACCESS_DENIED:
            return ErrorPortInUse;
        default:
            return Error();
    }
}

SetupComm( hSerial, 1024, 1024 );
if (!SendFlag)
{
    if (!SetCommMask(hSerial, EV_RING |EV_RLSD))
         // Error setting communications mask
        printf("error mascara");
}
else
{
    if (!SetCommMask(hSerial, EV_RLSD))
    {
        // Error setting communications mask
        printf("error mascara");
    }
}

return 0;
}

在INITIALISE部分：

int Initialise(unsigned baud)
{
// flush port...
if(!FlushFileBuffers(hSerial))
    return Error();
if(!PurgeComm(hSerial, PURGE_TXABORT|PURGE_RXABORT|PURGE_TXCLEAR|PURGE_RXCLEAR))
    return Error();

// configure port...
DCB dcb ;
if(!GetCommState(hSerial, &dcb))
    return Error();
dcb.BaudRate    = CBR_115200;
dcb.ByteSize    = 8;
dcb.StopBits    = ONESTOPBIT;
dcb.Parity        = NOPARITY;
if(!SetCommState(hSerial, &dcb))
{
    if(GetLastError()==ERROR_INVALID_PARAMETER)
        return ErrorInvalidSettings;
    return Error();
}

// set timeouts to zero so read/writes return immediately...
COMMTIMEOUTS timeouts = {0};
timeouts.ReadIntervalTimeout        = MAXDWORD;
timeouts.ReadTotalTimeoutConstant       = 0;
timeouts.ReadTotalTimeoutMultiplier     = 0;
timeouts.WriteTotalTimeoutConstant      = 0;
timeouts.WriteTotalTimeoutMultiplier= 0;
if(!SetCommTimeouts(hSerial, &timeouts))
    return Error();

// flush port again...
if(!PurgeComm(hSerial, PURGE_TXABORT|PURGE_RXABORT|PURGE_TXCLEAR|PURGE_RXCLEAR))
    return Error();
return 0;
}

表盘部分：

int Dial(char *telefono)
{

unsigned long int  n = 0;
DWORD dwCommEvent;
DWORD bytes;
DWORD dwRead;
char cadena[15];
char  chRead;


sprintf(cadena, "ATDT%s\r", telefono);

if (!WriteFile( hSerial, "ATH1\r", strlen("ATH1\r"), (&(n)), 0 ))
{
    printf("error");
}
FlushFileBuffers( hSerial );
Sleep(1000);

if (!WriteFile( hSerial, cadena, strlen(cadena), (&(n)), 0))
{
    printf("error");
}
FlushFileBuffers( hSerial );
Sleep(10000);

printf("Marcamos");

do
{
    printf("Espero eventos");
    if(WaitCommEvent(hSerial, &dwCommEvent, NULL))
    {
        if(dwCommEvent & EV_RLSD)
        {
            printf("rlsd");
            break;
        }
        else
        {
            printf("otro");
        }
    }
    printf("fin del bucle");
} while(true);



return 0;
}

听音部分：

int Listen()
{
DWORD dwCommEvent;
unsigned long int  n = 0;

do
{
    printf("ESpero eventos");
    if(WaitCommEvent(hSerial, &dwCommEvent, NULL))
    {
        if(dwCommEvent & EV_RING)
        {
            printf("RING");

            if (!WriteFile( hSerial, "ATA\r", strlen("ATA\r"), (&(n)), 0 ))
            {
                printf("error");
            }
            FlushFileBuffers( hSerial );
            break;
        }
        else if (dwCommEvent & EV_RLSD )
        {
            break;
        }
    }
    printf("fin del bucle");
} while(true);
return 0;
}

Answer 1

您可能需要尝试在接收侧发出ATS0 = 1，并让调制解调器自动应答（替换要代替1-环的数量，如果你想）。

您可以发现，智能调制解调器不总是通过环（EV_RING）信号。

编辑：不要忘记“ATS0 = 0”，当你不希望调制解调器自动回答任何

Answer 2

您可以使用微软的有它的时候更容易电话服务API （TAPI），而不是试图说服直接调制解调器。

Answer 3

也许你需要应用 A0和/或S0 = 1 Hayes命令在应答侧。