Zugriff auf ein Seriell-zu-USB-Gerät mit I/O-Kit
Frage
Ich habe folgendes Problem:Ich habe ein Wintec WBT-202 GPS-Gerät, das die Standortdaten live als NMEA-Daten über USB übertragen kann.Bei diesem USB handelt es sich lediglich um eine USB-zu-Seriell-Brücke, die unter Windows mit dem Standard ausgeführt wird usbser.sys
Treiber.
Mein Problem besteht darin, es unter Mac OS X zum Laufen zu bringen.
Die Hardware Die USB-GPS-Maus verwendet einen Atmel AT91SAM7S256-Chip, der auch für die USB-Schnittstelle verantwortlich ist.
Das Problem Unter Mac OS X passiert nichts.Unter wird kein neues Zeichengerät erstellt /dev
um dieses Gerät zugänglich zu machen.
Unter Windows der Standardtreiber usbser.sys
wird eingesetzt.Es gibt lediglich eine INF-Datei, die die VendorID und ProductID auf diesen Treiber verweist.Durch die Verwendung von Snoopy Pro unter Windows (einer USB-Sniffing-Software) weiß ich, dass das Gerät die Daten nach der ordnungsgemäßen Initialisierung als ASCII-NMEA-Strings sendet, was alles ist, was ich möchte.
Frage 1 Ist dort ein usbser.sys
Äquivalent für Mac OS X?Wenn ja, könnte ein codeloser Text verwendet werden, um sicherzustellen, dass der Treiberabgleich ordnungsgemäß erfolgt?
Wenn dies nicht funktionieren würde, würde ich IOKit aus dem Benutzerbereich verwenden, um Nachrichten an das Gerät zu senden und zu empfangen.Ich habe noch Fragen, wie das im Detail funktionieren würde, da ich die Dokumentation von Apple nicht ganz verstehe.Wenn ein USB-Gerät angeschlossen ist, findet ein Treiberabgleich statt.Was passiert, wenn kein Treiber gefunden wird?
Frage 2 Könnte es sein, dass dann ein generischer USB-Treiber geladen wird, mit dem ich im Kernel vom Benutzerbereich aus „sprechen“ kann?Woher weiß ich, dass der richtige Treiber geladen ist?
Frage 3 Ich habe gesehen, dass es im WWDC08 eine „Erste Schritte mit dem I/O-Kit“-Sitzung gab. Gibt es eine Möglichkeit, auf dieses Sitzungsvideo zuzugreifen?
Ich habe einige Protokolle von USBProbe und den Auszug aus der I/O-Registrierung angehängt.
Für Kommentare dazu, wie ich anfangen könnte, welche Dokumentation ein anständiges Tutorial bietet, wäre ich sehr dankbar.
Ich habe nachgeschaut Mac OS X-Interna – Ein System-Interna von Amit Singh, Apples Dokumentation „Erste Schritte mit I/O Kit“, „I/O Kit Fundamentals Guide“ und das Beispiel für private USB-Daten.
ANHANG
USB-Sonde
Full Speed device @ 8 (0xFD360000): ............................................. Communication device: "WINTEC WBT202 CDC"
Port Information: 0x0019
Captive
External Device
Connected
Enabled
Device Descriptor
Descriptor Version Number: 0x0200
Device Class: 2 (Communication)
Device Subclass: 0
Device Protocol: 0
Device MaxPacketSize: 8
Device VendorID/ProductID: 0x03EB/0x6119 (Atmel Corporation)
Device Version Number: 0x0100
Number of Configurations: 1
Manufacturer String: 0 (none)
Product String: 1 "WINTEC WBT202 CDC"
Serial Number String: 0 (none)
Configuration Descriptor
Length (and contents): 67
Raw Descriptor (hex) 0000: 09 02 43 00 02 01 00 C0 32 09 04 00 00 01 02 02
Raw Descriptor (hex) 0010: 00 00 05 24 00 10 01 05 24 01 01 00 04 24 02 02
Raw Descriptor (hex) 0020: 05 24 06 00 01 07 05 83 03 40 00 0A 09 04 01 00
Raw Descriptor (hex) 0030: 02 0A 00 00 00 07 05 01 02 40 00 00 07 05 82 02
Raw Descriptor (hex) 0040: 40 00 00
Number of Interfaces: 2
Configuration Value: 1
Attributes: 0xC0 (self-powered)
MaxPower: 100 ma
Interface #0 - Communications-Control
Alternate Setting 0
Number of Endpoints 1
Interface Class: 2 (Communications-Control)
Interface Subclass; 2
Interface Protocol: 0
Comm Class Header Functional Descriptor
Raw Descriptor (hex) 0000: 05 24 00 10 01
Comm Class Call Management Functional Descriptor
Raw Descriptor (hex) 0000: 05 24 01 01 00
Comm Class Abstract Control Management Functional Descriptor
Raw Descriptor (hex) 0000: 04 24 02 02
Comm Class Union Functional Descriptor
Raw Descriptor (hex) 0000: 05 24 06 00 01
Endpoint 0x83 - Interrupt Input
Address: 0x83 (IN)
Attributes: 0x03 (Interrupt no synchronization data endpoint)
Max Packet Size: 64
Polling Interval: 10 ms
Interface #1 - Communications-Data/Unknown Comm Class Model
Alternate Setting 0
Number of Endpoints 2
Interface Class: 10 (Communications-Data)
Interface Subclass; 0 (Unknown Comm Class Model)
Interface Protocol: 0
Endpoint 0x01 - Bulk Output
Address: 0x01 (OUT)
Attributes: 0x02 (Bulk no synchronization data endpoint)
Max Packet Size: 64
Polling Interval: 0 ms
Endpoint 0x82 - Bulk Input
Address: 0x82 (IN)
Attributes: 0x02 (Bulk no synchronization data endpoint)
Max Packet Size: 64
Polling Interval: 0 ms
IO-Registrierung
8: WINTEC WBT202 CDC@fd360000 <class IOUSBDevice>
AppleUSBCDC <class AppleUSBCDC>
IOUSBInterface@0 <class IOUSBInterface>
AppleUSBCDCACMControl <class AppleUSBCDCACMControl>
IOUSBInterface@1 <class IOUSBInterface>
bcdDevice 256 (0x100)
bDeviceClass 2 (0x2)
bDeviceProtocol 0 (0x0)
bDeviceSubClass 0 (0x0)
bMaxPacketSize0 8 (0x8)
bNumConfigurations 1 (0x1)
Bus Power Available 250 (0xfa)
Device Speed 1 (0x1)
idProduct 24857 (0x6119)
idVendor 1003 (0x3eb)
iManufacturer 0 (0x0)
IOCFPlugInTypes
9dc7b780-9ec0-11d4-a54f-000a27052861 IOUSBFamily.kext/Contents/PlugIns/IOUSBLib.bundle
IOGeneralInterest IOCommand is not serializable
IOUserClientClass IOUSBDeviceUserClientV2
iProduct 1 (0x1)
iSerialNumber 0 (0x0)
locationID -46792704 (0xfd360000)
Low Power Displayed No
non-removable yes
PortNum 6 (0x6)
Requested Power 50 (0x32)
sessionID 1167822359 (0x459b8e17459b8e17)
USB Address 5 (0x5)
USB Product Name WINTEC WBT202 CDC
USB-Sondenprotokoll beim Anschließen des Geräts
12.719 [5] AppleUSBHub[0x6805a00]::ProcessStatusChanged found (0x 40) in statusChangedBitmap
12.719 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(+) now (1)
12.719 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: port 6 obtained runLock
12.719 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: calling GetPortStatus for port 6
12.719 [5] AppleUSBHub[0x6805a00]::powerChangeDone - spawning _checkForActivePortsThread
12.719 [5] AppleUSBEHCI[0x65ea000]::FindControlBulkEndpoint (inactive) - linking to active list: 65997c0
12.719 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - Hub 0xfd300000 port 6 - Initial status(0x0101)/change(0x0001)
12.719 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - change 4 clearing feature 0x10.
12.719 [5] AppleUSBHub[0x6805a00]::ClearPortFeature port/feature (60010) - clearing
12.719 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - status(0x0101) - change(0x0000) - before call to (4) handler function
12.719 [5] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler - handling port 6 changes (101,0).
12.719 [5] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler port (6) - waiting 100 ms before asserting reset
12.819 [5] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler - port 6 - no existing device found on port
12.820 [4] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler port 6 status(0101)/change(0000) - no error from GetPortStatus
12.820 [5] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler - port 6 - device detected, calling AddDevice
12.820 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(+) now (2)
12.820 [5] AppleUSBHubPort[0x6807200]::DefaultConnectionChangeHandler - port 6 done, ending.
12.820 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - err (0) on return from call to (4) handler function
12.820 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: calling GetPortStatus for port 6
12.820 [5] ***** AppleUSBHubPort[0x6807200]::AddDevice - port 6 on hub at 0xfd300000 - start
12.820 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - Hub 0xfd300000 port 6 - Initial status(0x0101)/change(0x0000)
12.820 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - err = 0 - done, releasing _runLock
12.820 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(-) now (1)
12.820 [3] AppleUSBHub[0x6805a00]::DecrementOutstandingIO(269), outstandingIO(0), _interruptReadPending(false) - rearming read
12.820 [5] AppleUSBHub[0x6805a00]::DecrementOutstandingIO(269) - spawning _checkForActivePortsThread
12.820 [5] ***** AppleUSBHubPort[0x6807200]::AddDevice - port 6 on hub at 0xfd300000 - bus 0x65ea000 - acquiring dev zero lock
12.820 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - about to obtain device zero lock
12.820 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - not already locked - obtaining
12.820 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - setting _devZeroLock to true
12.820 [5] AppleUSBEHCI[0x65ea000]: Acquired Device Zero
12.820 [5] ***** AppleUSBHubPort[0x6807200]::AddDevice - port 6 on hub at 0xfd300000 - resetting port
12.820 [5] AppleUSBHub[0x6805a00]::SetPortFeature port/feature (60004) - setting
12.821 [5] ***** AppleUSBHubPort[0x6807200]::AddDevice - port 6 on hub at 0xfd300000 - (err = 0) done - returning .
12.821 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(-) now (0)
12.879 [5] AppleUSBHub[0x6805a00]::ProcessStatusChanged found (0x 40) in statusChangedBitmap
12.879 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(+) now (1)
12.879 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: port 6 obtained runLock
12.879 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: delaying 100ms before first GetPortStatus after a reset of port 6
12.879 [5] AppleUSBHub[0x6805a00]::powerChangeDone - spawning _checkForActivePortsThread
12.979 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler: calling GetPortStatus for port 6
12.979 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - Hub 0xfd300000 port 6 - Initial status(0x0103)/change(0x0010)
12.979 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - change 1 clearing feature 0x14.
12.979 [5] AppleUSBHub[0x6805a00]::ClearPortFeature port/feature (60014) - clearing
12.979 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - status(0x0103) - change(0x0000) - before call to (1) handler function
12.979 [5] ***** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6 on hub at 0xfd300000 - start - status(0x0103) change (0x0000)
12.979 [5] **1** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6 on hub at 0xfd300000 - delaying 10 ms
12.989 [5] **2** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6 on hub at 0xfd300000 - found full speed device
12.989 [5] **2** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6 on hub at 0xfd300000 - configuring dev zero
12.989 [5] AppleUSBEHCI[0x65ea000]::ConfigureDeviceZero, new method called with hub:3, port:6
12.989 [5] AppleUSBEHCI[0x65ea000]::CreateDevice, high speed ancestor hub:3, port:6
12.989 [5] AppleUSBEHCI[0x65ea000]::DoCreateEP, high speed ancestor hub:3, port:6
12.989 [3] AppleUSBEHCI[0x65ea000]::UIMCreateControlEndpoint(0, 0, 8, 1 @(3, 6))
12.989 [5] **3** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6 on hub at 0xfd300000 - getting dev zero desc
12.990 [5] **3** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6, using 8 for maxPacketSize
12.992 [5] **5** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6, Releasing DeviceZero after successful SetAddress to 5
12.992 [5] AppleUSBEHCI[0x65ea000]::UIMDeleteEndpoint: unlinking async endpoint
12.993 [5] AppleUSBEHCI[0x65ea000]::UIMDeleteEndpoint: Deallocating 0x68bd700
12.993 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - about to release device zero lock
12.993 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - releasing lock
12.993 [5] AppleUSBEHCI[0x65ea000]::ProtectedDevZeroLock - wakeup done
12.993 [5] AppleUSBEHCI[0x65ea000]:: Released Device Zero
12.993 [5] AppleUSBEHCI[0x65ea000]::CreateDevice, new method called with hub:3, port:6
12.993 [5] AppleUSBEHCI[0x65ea000]::CreateDevice, high speed ancestor hub:3, port:6
12.993 [5] AppleUSBEHCI[0x65ea000]::CreateDevice: addr=5, speed=full, power=500
12.993 [5] IOUSBDevice @ 5 (500mA available, full speed)
12.993 [5] AppleUSBEHCI[0x65ea000]::DoCreateEP, high speed ancestor hub:3, port:6
12.993 [3] AppleUSBEHCI[0x65ea000]::UIMCreateControlEndpoint(5, 0, 8, 1 @(3, 6))
12.993 [5] IOUSBDevice[0xd335c00]::GetDeviceDescriptor (size 18)
12.994 [5] IOUSBDevice[0xd335c00]::GetStringDescriptor Got string descriptor 1, length 36, got 36
12.994 [5] **10** AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6, at addr: 5, Successful
12.994 [5] AppleUSBHub[0x6805a00]::GetPortInformation for port[6]
12.995 [5] WINTEC WBT202 CDC[0xd335c00]::GetDeviceInformation Hub device name is HubDevice at USB address 3
12.995 [5] AppleUSBHub[0x6656800]::GetPortInformation for port[3]
12.995 [5] AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - Port 6 of Hub at 0xfd300000 (USB Address: 5), calling registerService for device WINTEC WBT202 CDC
12.995 [5] AppleUSBHubPort[0x6807200]::AddDeviceResetChangeHandler - port 6, err = 0, ALL DONE
12.995 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - err (0) on return from call to (1) handler function
12.995 [5] AppleUSBHubPort[0x6807200]::PortStatusChangedHandler - port 6 - err = 0 - done, releasing _runLock
12.995 [3] AppleUSBHub[0x6805a00]::ChangeRaisedPowerState(-) now (0)
12.995 [3] AppleUSBHub[0x6805a00]::DecrementOutstandingIO(274), outstandingIO(0), _interruptReadPending(false) - rearming read
12.995 [5] AppleUSBHub[0x6805a00]::DecrementOutstandingIO(274) - spawning _checkForActivePortsThread
12.999 [5] Finding device driver for WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDC, score: 69000, wildCard = 0
12.999 [5] Finding device driver for WINTEC WBT202 CDC, matching personality using com.apple.iokit.IOUSBUserClient, score: 106999, wildCard = 3
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::handleOpen - [0xdd78880] is not an IOUSBInterface
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::TakeGetConfigLock - calling through to ChangeGetConfigLock
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::ChangeGetConfigLock - setting _GETCONFIGLOCK to true
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::GetFullConfigurationDescriptor - Index (0) - getting first 4 bytes of config descriptor
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::GetConfigDescriptor (length: 4)
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::GetFullConfigurationDescriptor - Index (0) - getting full 67 bytes of config descriptor
13.002 [5] WINTEC WBT202 CDC[0xd335c00]::GetConfigDescriptor (length: 67)
13.003 [5] WINTEC WBT202 CDC[0xd335c00]::ReleaseGetConfigLock - calling through to ChangeGetConfigLock
13.003 [5] WINTEC WBT202 CDC[0xd335c00]::ChangeGetConfigLock - setting _GETCONFIGLOCK to false and calling commandWakeup
13.503 [5] WINTEC WBT202 CDC[0xd335c00]::TerminateInterfaces interfaceList 0 terminate: 1
13.503 [5] WINTEC WBT202 CDC[0xd335c00]::SetConfiguration to 1
13.504 [5] WINTEC WBT202 CDC[0xd335c00]::SetConfiguration Found InterfaceDescription[0] = 0x68bc889
13.504 [5] WINTEC WBT202 CDC[0xd335c00]::SetConfiguration Found InterfaceDescription[1] = 0x68bc8ac
13.504 [5] WINTEC WBT202 CDC[0xd335c00]::RegisterInterfaces interfaceArray 0x6de9b00
13.504 [5] WINTEC WBT202 CDC[0xd335c00]::RegisterInterfaces matching to interface = 0x8261700
13.553 [5] Finding driver for interface #0 of WINTEC WBT202 CDC, matching personality using com.apple.iokit.IOUSBUserClient, score: 104999, wildCard = 5
13.567 [5] Finding driver for interface #0 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCACMControl, score: 50000, wildCard = 0
13.570 [5] AppleUSBEHCI[0x65ea000]::DoCreateEP, high speed ancestor hub:3, port:6
13.570 [5] AppleUSBEHCI[0x65ea000]: UIMCreateInterruptEndpoint endpoint does NOT exist (this is normal)
13.570 [5] AppleUSBEHCI[0x65ea000]::AllocateInterruptBandwidth - pED[0x68bd780] _speed(1)
13.570 [3] AppleUSBEHCITTInfo[0x682b400]::AllocatePeriodicBandwidth: pSPE[0x6f8ae40]
13.570 [5] AppleUSBEHCISplitPeriodicEndpoint[0x6f8ae40]::FindStartFrameAndStartTime - _FSBytesUsed (78)
13.570 [5] AppleUSBEHCISplitPeriodicEndpoint[0x6f8ae40]::FindStartFrameAndStartTime - using Start Time entry found - _startFrame(1) _startTime(36)
13.570 [5] AppleUSBEHCI[0x65ea000]::AllocateInterruptBandwidth - returning 0x0(success)
13.571 [5] AppleUSBHub[0x6805a00]::powerChangeDone - spawning _checkForActivePortsThread
13.573 [5] WINTEC WBT202 CDC[0xd335c00]::RegisterInterfaces matching to interface = 0xd337700
13.621 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.iokit.IOUSBUserClient, score: 104999, wildCard = 5
13.636 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCACMData, score: 50000, wildCard = 0
14.024 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCACMData, score: 50000, wildCard = 0
14.075 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.iokit.IOUSBUserClient, score: 104999, wildCard = 5
14.089 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCACMData, score: 50000, wildCard = 0
14.090 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCECMData, score: 50000, wildCard = 0
14.266 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCECMData, score: 50000, wildCard = 0
14.315 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.iokit.IOUSBUserClient, score: 104999, wildCard = 5
14.330 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCACMData, score: 50000, wildCard = 0
14.330 [5] Finding driver for interface #1 of WINTEC WBT202 CDC, matching personality using com.apple.driver.AppleUSBCDCECMData, score: 50000, wildCard = 0
14.334 [5] WINTEC WBT202 CDC[0xd335c00]::SetConfiguration returning success
BEARBEITEN:Der Protokolldateiauszug aus console.app wurde nach dem Anschließen des Geräts angehängt
16.02.11 09:05:55 kernel 0 0 AppleUSBCDCACMControl: getFunctionalDescriptors - Descriptors are incorrect, checking...
16.02.11 09:05:55 kernel 0 1 AppleUSBCDCACMData: start - Find CDC driver for data interface failed
Lösung
Die Antwort, die ich durch einen Beitrag auf der USB-Mailingliste von Apple erhalten habe, lautet: „Apple AppleUSBCDCACMData
Der Treiber hat einen Fehler, der seine Arbeit verhindert.Ich habe einen Fehler auf dem Radar von Apple gemeldet und hoffe, dass sie ihn bald beheben werden.
Andere Tipps
Es sieht so aus, als ob der CDC-Treiber des Systems korrekt übereinstimmt, was erstellt werden sollte /dev/ttyusbmodem*
IIRC, ich würde die Systemprotokolle auf Fehlermeldungen überprüfen, falls dies nicht funktioniert.
Wenn Sie ein USB-Treiberprogrammierer sind, sollten Sie den Quellcode für das AppleUSBCDCDriver-Projekt herunterladen, das AppleUSBCDCDriver.kext, AppleUSBCDCACMControl.kext, AppleUSBCDCACMData.kext, AppleUSBCDCECMControl.kext, AppleUSBCDCECMData.kext enthält.
Was ich versprechen kann ist, dass Sie dieses Problem definitiv lösen könnten, indem Sie den Code korrigieren und Ihren eigenen Treiber erstellen. (Denken Sie daran, den Klassennamen des Treibers zu ändern.)
Was ich bestätigen kann, ist, dass der AppleUSBCDCDriver hauptsächlich gemäß der Standard Communication Device Class Specification und unter Berücksichtigung der Überlegungen des Apple-Entwicklungsteams entwickelt wurde und dieses Problem kein Fehler sein sollte.
Unter Mac OS erfolgt der Treiberabgleich hauptsächlich anhand der info.plist des Treibers, genau wie bei der .inf-Datei unter Windows.
Es gibt eine Problemumgehung für den unter erwähnten Fehler AppleUSBCDCACMData
.Sie müssen dem Anrufverwaltungsdeskriptor eine Schnittstelle zuweisen.Sie haben es auf 00 eingestellt.
Du zeigst:
Comm Class Call Management Functional Descriptor
Raw Descriptor (hex) 0000: 05 24 01 01 00
Das fehlt und Aufgabe.Unter Verwendung der ATMEL USB-Bibliotheken würde es so aussehen:
// Class-specific call management functional descriptor`
{ sizeof(CDCCallManagementDescriptor),
CDCGenericDescriptor_INTERFACE,
CDCGenericDescriptor_CALLMANAGEMENT,
CDCCallManagementDescriptor_SELFCALLMANAGEMENT,
1 // <--needed for MacOS
}