https://stackoverflow.com/questions/19672302
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianWe know the intial data size (120GB) and we know the default maximium chunk size in MongoDB is 64MB. If we divide 64MB into 120GB we get 1920 - so that is the minimum number of chunks we should look to start with. As it happens 2048 happens to be a power of 16 divided by 2, and given that the GUID (our shard key) is hex based, that's a much easier number to deal with than 1920 (see below).
NOTE: This pre-splitting must be done before any data is added to the collection. If you use the enableSharding() command on a collection that contains data, MongoDB will split the data itself and you will then be running this while chunks already exist - that can lead to quite odd chunk distribution, so beware.
For the purposes of this answer, let's assume that the database is going to be called users and the collection is called userInfo. Let's also assume that the GUID will be written into the _id field. With those parameters we would connect to a mongos and run the following commands:
// first switch to the users DB
use users;
// now enable sharding for the users DB
sh.enableSharding("users");
// enable sharding on the relevant collection
sh.shardCollection("users.userInfo", {"_id" : 1});
// finally, disable the balancer (see below for options on a per-collection basis)
// this prevents migrations from kicking off and interfering with the splits by competing for meta data locks
sh.stopBalancer();
Now, per the calculation above, we need to split the GUID range into 2048 chunks. To do that we need at least 3 hex digits (16 ^ 3 = 4096) and we'll be putting them in the most significant digits (i.e. the 3 leftmost) for the ranges. Again, this should be run from a mongos shell
// Simply use a for loop for each digit
for ( var x=0; x < 16; x++ ){
for( var y=0; y<16; y++ ) {
// for the innermost loop we will increment by 2 to get 2048 total iterations
// make this z++ for 4096 - that would give ~30MB chunks based on the original figures
for ( var z=0; z<16; z+=2 ) {
// now construct the GUID with zeroes for padding - handily the toString method takes an argument to specify the base
var prefix = "" + x.toString(16) + y.toString(16) + z.toString(16) + "00000000000000000000000000000";
// finally, use the split command to create the appropriate chunk
db.adminCommand( { split : "users.userInfo" , middle : { _id : prefix } } );
}
}
}
Once that is done, let's check the state of play using the sh.status() helper:
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"version" : 3,
"minCompatibleVersion" : 3,
"currentVersion" : 4,
"clusterId" : ObjectId("527056b8f6985e1bcce4c4cb")
}
shards:
{ "_id" : "shard0000", "host" : "localhost:30000" }
{ "_id" : "shard0001", "host" : "localhost:30001" }
{ "_id" : "shard0002", "host" : "localhost:30002" }
{ "_id" : "shard0003", "host" : "localhost:30003" }
databases:
{ "_id" : "admin", "partitioned" : false, "primary" : "config" }
{ "_id" : "users", "partitioned" : true, "primary" : "shard0001" }
users.userInfo
shard key: { "_id" : 1 }
chunks:
shard0001 2049
too many chunks to print, use verbose if you want to force print
We have our 2048 chunks (plus one extra thanks to the min/max chunks), but they are all still on the original shard because the balancer is off. So, let's re-enable the balancer:
sh.startBalancer();
This will immediately begin to balance out, and it will be relatively quick because all the chunks are empty, but it will still take a little while (much slower if it is competing with migrations from other collections). Once some time has elapsed, run sh.status() again and there you (should) have it - 2048 chunks all nicely split out across 4 shards and ready for an initial data load:
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"version" : 3,
"minCompatibleVersion" : 3,
"currentVersion" : 4,
"clusterId" : ObjectId("527056b8f6985e1bcce4c4cb")
}
shards:
{ "_id" : "shard0000", "host" : "localhost:30000" }
{ "_id" : "shard0001", "host" : "localhost:30001" }
{ "_id" : "shard0002", "host" : "localhost:30002" }
{ "_id" : "shard0003", "host" : "localhost:30003" }
databases:
{ "_id" : "admin", "partitioned" : false, "primary" : "config" }
{ "_id" : "users", "partitioned" : true, "primary" : "shard0001" }
users.userInfo
shard key: { "_id" : 1 }
chunks:
shard0000 512
shard0002 512
shard0003 512
shard0001 513
too many chunks to print, use verbose if you want to force print
{ "_id" : "test", "partitioned" : false, "primary" : "shard0002" }
You are now ready to start loading data, but to absolutely guarantee that no splits or migrates happen until your data load is complete, you need to do one more thing - turn off the balancer and autosplitting for the duration of the import:
- To disable all balancing, run this command from the mongos:
sh.stopBalancer() - If you want to leave other balancing operations running, you can disable on a specific collection. Using the namespace above as an example:
sh.disableBalancing("users.userInfo") - To turn off auto splitting during the load, you will need to restart each
mongosyou will be using to load the data with the--noAutoSplitoption.
Once the import is complete, reverse the steps as needed (sh.startBalancer(), sh.enableBalancing("users.userInfo"), and restart the mongos without --noAutoSplit) to return everything to the default settings.
**
Update: Optimizing for Speed
**
The approach above is fine if you are not in a hurry. As things stand, and as you will discover if you test this, the balancer is not very fast - even with empty chunks. Hence as you increase the number of chunks you create, the longer it is going to take to balance. I have seen it take more than 30 minutes to finish balancing 2048 chunks though this will vary depending on the deployment.
That might be OK for testing, or for a relatively quiet cluster, but having the balancer off and requiring no other updates interfere will be much harder to ensure on a busy cluster. So, how do we speed things up?
The answer is to do some manual moves early, then split the chunks once they are on their respective shards. Note that this is only desirable with certain shard keys (like a randomly distributed UUID), or certain data access patterns, so be careful that you don't end up with poor data distribution as a result.
Using the example above we have 4 shards, so rather than doing all the splits, then balancing, we split into 4 instead. We then put one chunk on each shard by manually moving them, and then finally we split those chunks into the required number.
The ranges in the example above would look like this:
$min --> "40000000000000000000000000000000"
"40000000000000000000000000000000" --> "80000000000000000000000000000000"
"80000000000000000000000000000000" --> "c0000000000000000000000000000000"
"c0000000000000000000000000000000" --> $max
It's only 4 commands to create these, but since we have it, why not re-use the loop above in a simplified/modified form:
for ( var x=4; x < 16; x+=4){
var prefix = "" + x.toString(16) + "0000000000000000000000000000000";
db.adminCommand( { split : "users.userInfo" , middle : { _id : prefix } } );
}
Here's how thinks look now - we have our 4 chunks, all on shard0001:
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"version" : 4,
"minCompatibleVersion" : 4,
"currentVersion" : 5,
"clusterId" : ObjectId("53467e59aea36af7b82a75c1")
}
shards:
{ "_id" : "shard0000", "host" : "localhost:30000" }
{ "_id" : "shard0001", "host" : "localhost:30001" }
{ "_id" : "shard0002", "host" : "localhost:30002" }
{ "_id" : "shard0003", "host" : "localhost:30003" }
databases:
{ "_id" : "admin", "partitioned" : false, "primary" : "config" }
{ "_id" : "test", "partitioned" : false, "primary" : "shard0001" }
{ "_id" : "users", "partitioned" : true, "primary" : "shard0001" }
users.userInfo
shard key: { "_id" : 1 }
chunks:
shard0001 4
{ "_id" : { "$minKey" : 1 } } -->> { "_id" : "40000000000000000000000000000000" } on : shard0001 Timestamp(1, 1)
{ "_id" : "40000000000000000000000000000000" } -->> { "_id" : "80000000000000000000000000000000" } on : shard0001 Timestamp(1, 3)
{ "_id" : "80000000000000000000000000000000" } -->> { "_id" : "c0000000000000000000000000000000" } on : shard0001 Timestamp(1, 5)
{ "_id" : "c0000000000000000000000000000000" } -->> { "_id" : { "$maxKey" : 1 } } on : shard0001 Timestamp(1, 6)
We will leave the $min chunk where it is, and move the other three. You can do this programatically, but it does depend on where the chunks reside initially, how you have named your shards etc. so I will leave this manual for now, it is not too onerous - just 3 moveChunk commands:
mongos> sh.moveChunk("users.userInfo", {"_id" : "40000000000000000000000000000000"}, "shard0000")
{ "millis" : 1091, "ok" : 1 }
mongos> sh.moveChunk("users.userInfo", {"_id" : "80000000000000000000000000000000"}, "shard0002")
{ "millis" : 1078, "ok" : 1 }
mongos> sh.moveChunk("users.userInfo", {"_id" : "c0000000000000000000000000000000"}, "shard0003")
{ "millis" : 1083, "ok" : 1 }
Let's double check, and make sure that the chunks are where we expect them to be:
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"version" : 4,
"minCompatibleVersion" : 4,
"currentVersion" : 5,
"clusterId" : ObjectId("53467e59aea36af7b82a75c1")
}
shards:
{ "_id" : "shard0000", "host" : "localhost:30000" }
{ "_id" : "shard0001", "host" : "localhost:30001" }
{ "_id" : "shard0002", "host" : "localhost:30002" }
{ "_id" : "shard0003", "host" : "localhost:30003" }
databases:
{ "_id" : "admin", "partitioned" : false, "primary" : "config" }
{ "_id" : "test", "partitioned" : false, "primary" : "shard0001" }
{ "_id" : "users", "partitioned" : true, "primary" : "shard0001" }
users.userInfo
shard key: { "_id" : 1 }
chunks:
shard0001 1
shard0000 1
shard0002 1
shard0003 1
{ "_id" : { "$minKey" : 1 } } -->> { "_id" : "40000000000000000000000000000000" } on : shard0001 Timestamp(4, 1)
{ "_id" : "40000000000000000000000000000000" } -->> { "_id" : "80000000000000000000000000000000" } on : shard0000 Timestamp(2, 0)
{ "_id" : "80000000000000000000000000000000" } -->> { "_id" : "c0000000000000000000000000000000" } on : shard0002 Timestamp(3, 0)
{ "_id" : "c0000000000000000000000000000000" } -->> { "_id" : { "$maxKey" : 1 } } on : shard0003 Timestamp(4, 0)
That matches our proposed ranges above, so all looks good. Now run the original loop above to split them "in place" on each shard and we should have a balanced distribution as soon as the loop finishes. One more sh.status() should confirm things:
mongos> for ( var x=0; x < 16; x++ ){
... for( var y=0; y<16; y++ ) {
... // for the innermost loop we will increment by 2 to get 2048 total iterations
... // make this z++ for 4096 - that would give ~30MB chunks based on the original figures
... for ( var z=0; z<16; z+=2 ) {
... // now construct the GUID with zeroes for padding - handily the toString method takes an argument to specify the base
... var prefix = "" + x.toString(16) + y.toString(16) + z.toString(16) + "00000000000000000000000000000";
... // finally, use the split command to create the appropriate chunk
... db.adminCommand( { split : "users.userInfo" , middle : { _id : prefix } } );
... }
... }
... }
{ "ok" : 1 }
mongos> sh.status()
--- Sharding Status ---
sharding version: {
"_id" : 1,
"version" : 4,
"minCompatibleVersion" : 4,
"currentVersion" : 5,
"clusterId" : ObjectId("53467e59aea36af7b82a75c1")
}
shards:
{ "_id" : "shard0000", "host" : "localhost:30000" }
{ "_id" : "shard0001", "host" : "localhost:30001" }
{ "_id" : "shard0002", "host" : "localhost:30002" }
{ "_id" : "shard0003", "host" : "localhost:30003" }
databases:
{ "_id" : "admin", "partitioned" : false, "primary" : "config" }
{ "_id" : "test", "partitioned" : false, "primary" : "shard0001" }
{ "_id" : "users", "partitioned" : true, "primary" : "shard0001" }
users.userInfo
shard key: { "_id" : 1 }
chunks:
shard0001 513
shard0000 512
shard0002 512
shard0003 512
too many chunks to print, use verbose if you want to force print
And there you have it - no waiting for the balancer, the distribution is already even.
