Detect semicircle in OpenCV

StackOverflow https://stackoverflow.com/questions/20698613

Question

I am trying to detect full circles and semicircles in an image.enter image description here

I am following the below mentioned procedure: Process image (including Canny edge detection). Find contours and draw them on an empty image, so that I can eliminate unwanted components (The processed image is exactly what I want). Detect circles using HoughCircles. And, this is what I get:

enter image description here

I tried varying the parameters in HoughCircles but the results are not consistent as it varies based on lighting and the position of circles in the image. I accept or reject a circle based on its size. So, the result is not acceptable. Also, I have a long list of "acceptable" circles. So, I need some allowance in the HoughCircle params. As for the full circles, it's easy - I can simply find the "roundness" of the contour. The problem is semicircles!

Please find the edited image before Hough transformenter image description here

Was it helpful?

Solution

Use houghCircle directly on your image, don't extract edges first. Then test for each detected circle, how much percentage is really present in the image:

int main()
{
    cv::Mat color = cv::imread("../houghCircles.png");
    cv::namedWindow("input"); cv::imshow("input", color);

    cv::Mat canny;

    cv::Mat gray;
    /// Convert it to gray
    cv::cvtColor( color, gray, CV_BGR2GRAY );

    // compute canny (don't blur with that image quality!!)
    cv::Canny(gray, canny, 200,20);
    cv::namedWindow("canny2"); cv::imshow("canny2", canny>0);

    std::vector<cv::Vec3f> circles;

    /// Apply the Hough Transform to find the circles
    cv::HoughCircles( gray, circles, CV_HOUGH_GRADIENT, 1, 60, 200, 20, 0, 0 );

    /// Draw the circles detected
    for( size_t i = 0; i < circles.size(); i++ ) 
    {
        Point center(cvRound(circles[i][0]), cvRound(circles[i][1]));
        int radius = cvRound(circles[i][2]);
        cv::circle( color, center, 3, Scalar(0,255,255), -1);
        cv::circle( color, center, radius, Scalar(0,0,255), 1 );
    }

    //compute distance transform:
    cv::Mat dt;
    cv::distanceTransform(255-(canny>0), dt, CV_DIST_L2 ,3);
    cv::namedWindow("distance transform"); cv::imshow("distance transform", dt/255.0f);

    // test for semi-circles:
    float minInlierDist = 2.0f;
    for( size_t i = 0; i < circles.size(); i++ ) 
    {
        // test inlier percentage:
        // sample the circle and check for distance to the next edge
        unsigned int counter = 0;
        unsigned int inlier = 0;

        cv::Point2f center((circles[i][0]), (circles[i][1]));
        float radius = (circles[i][2]);

        // maximal distance of inlier might depend on the size of the circle
        float maxInlierDist = radius/25.0f;
        if(maxInlierDist<minInlierDist) maxInlierDist = minInlierDist;

        //TODO: maybe paramter incrementation might depend on circle size!
        for(float t =0; t<2*3.14159265359f; t+= 0.1f) 
        {
            counter++;
            float cX = radius*cos(t) + circles[i][0];
            float cY = radius*sin(t) + circles[i][1];

            if(dt.at<float>(cY,cX) < maxInlierDist) 
            {
                inlier++;
                cv::circle(color, cv::Point2i(cX,cY),3, cv::Scalar(0,255,0));
            } 
           else
                cv::circle(color, cv::Point2i(cX,cY),3, cv::Scalar(255,0,0));
        }
        std::cout << 100.0f*(float)inlier/(float)counter << " % of a circle with radius " << radius << " detected" << std::endl;
    }

    cv::namedWindow("output"); cv::imshow("output", color);
    cv::imwrite("houghLinesComputed.png", color);

    cv::waitKey(-1);
    return 0;
}

For this input:

enter image description here

It gives this output:

enter image description here

The red circles are Hough results.

The green sampled dots on the circle are inliers.

The blue dots are outliers.

Console output:

100 % of a circle with radius 27.5045 detected
100 % of a circle with radius 25.3476 detected
58.7302 % of a circle with radius 194.639 detected
50.7937 % of a circle with radius 23.1625 detected
79.3651 % of a circle with radius 7.64853 detected

If you want to test RANSAC instead of Hough, have a look at this.

OTHER TIPS

Here is another way to do it, a simple RANSAC version (much optimization to be done to improve speed), that works on the Edge Image.

the method loops these steps until it is cancelled

  1. choose randomly 3 edge pixel
  2. estimate circle from them (3 points are enough to identify a circle)
  3. verify or falsify that it's really a circle: count how much percentage of the circle is represented by the given edges

  4. if a circle is verified, remove the circle from input/egdes

    int main()
{
//RANSAC

//load edge image
cv::Mat color = cv::imread("../circleDetectionEdges.png");

// convert to grayscale
cv::Mat gray;
cv::cvtColor(color, gray, CV_RGB2GRAY);

// get binary image
cv::Mat mask = gray > 0;
//erode the edges to obtain sharp/thin edges (undo the blur?)
cv::erode(mask, mask, cv::Mat());

std::vector<cv::Point2f> edgePositions;
edgePositions = getPointPositions(mask);

// create distance transform to efficiently evaluate distance to nearest edge
cv::Mat dt;
cv::distanceTransform(255-mask, dt,CV_DIST_L1, 3);

//TODO: maybe seed random variable for real random numbers.

unsigned int nIterations = 0;

char quitKey = 'q';
std::cout << "press " << quitKey << " to stop" << std::endl;
while(cv::waitKey(-1) != quitKey)
{
    //RANSAC: randomly choose 3 point and create a circle:
    //TODO: choose randomly but more intelligent, 
    //so that it is more likely to choose three points of a circle. 
    //For example if there are many small circles, it is unlikely to randomly choose 3 points of the same circle.
    unsigned int idx1 = rand()%edgePositions.size();
    unsigned int idx2 = rand()%edgePositions.size();
    unsigned int idx3 = rand()%edgePositions.size();

    // we need 3 different samples:
    if(idx1 == idx2) continue;
    if(idx1 == idx3) continue;
    if(idx3 == idx2) continue;

    // create circle from 3 points:
    cv::Point2f center; float radius;
    getCircle(edgePositions[idx1],edgePositions[idx2],edgePositions[idx3],center,radius);

    float minCirclePercentage = 0.4f;

    // inlier set unused at the moment but could be used to approximate a (more robust) circle from alle inlier
    std::vector<cv::Point2f> inlierSet;

    //verify or falsify the circle by inlier counting:
    float cPerc = verifyCircle(dt,center,radius, inlierSet);

    if(cPerc >= minCirclePercentage)
    {
        std::cout << "accepted circle with " << cPerc*100.0f << " % inlier" << std::endl;
        // first step would be to approximate the circle iteratively from ALL INLIER to obtain a better circle center
        // but that's a TODO

        std::cout << "circle: " << "center: " << center << " radius: " << radius << std::endl;
        cv::circle(color, center,radius, cv::Scalar(255,255,0),1);

        // accept circle => remove it from the edge list
        cv::circle(mask,center,radius,cv::Scalar(0),10);

        //update edge positions and distance transform
        edgePositions = getPointPositions(mask);
        cv::distanceTransform(255-mask, dt,CV_DIST_L1, 3);
    }

    cv::Mat tmp;
    mask.copyTo(tmp);

    // prevent cases where no fircle could be extracted (because three points collinear or sth.)
    // filter NaN values
    if((center.x == center.x)&&(center.y == center.y)&&(radius == radius))
    {
        cv::circle(tmp,center,radius,cv::Scalar(255));
    }
    else
    {
        std::cout << "circle illegal" << std::endl;
    }

    ++nIterations;
    cv::namedWindow("RANSAC"); cv::imshow("RANSAC", tmp);
}

std::cout << nIterations <<  " iterations performed" << std::endl;


cv::namedWindow("edges"); cv::imshow("edges", mask);
cv::namedWindow("color"); cv::imshow("color", color);

cv::imwrite("detectedCircles.png", color);
cv::waitKey(-1);
return 0;
}


float verifyCircle(cv::Mat dt, cv::Point2f center, float radius, std::vector<cv::Point2f> & inlierSet)
{
 unsigned int counter = 0;
 unsigned int inlier = 0;
 float minInlierDist = 2.0f;
 float maxInlierDistMax = 100.0f;
 float maxInlierDist = radius/25.0f;
 if(maxInlierDist<minInlierDist) maxInlierDist = minInlierDist;
 if(maxInlierDist>maxInlierDistMax) maxInlierDist = maxInlierDistMax;

 // choose samples along the circle and count inlier percentage
 for(float t =0; t<2*3.14159265359f; t+= 0.05f)
 {
     counter++;
     float cX = radius*cos(t) + center.x;
     float cY = radius*sin(t) + center.y;

     if(cX < dt.cols)
     if(cX >= 0)
     if(cY < dt.rows)
     if(cY >= 0)
     if(dt.at<float>(cY,cX) < maxInlierDist)
     {
        inlier++;
        inlierSet.push_back(cv::Point2f(cX,cY));
     }
 }

 return (float)inlier/float(counter);
}


inline void getCircle(cv::Point2f& p1,cv::Point2f& p2,cv::Point2f& p3, cv::Point2f& center, float& radius)
{
  float x1 = p1.x;
  float x2 = p2.x;
  float x3 = p3.x;

  float y1 = p1.y;
  float y2 = p2.y;
  float y3 = p3.y;

  // PLEASE CHECK FOR TYPOS IN THE FORMULA :)
  center.x = (x1*x1+y1*y1)*(y2-y3) + (x2*x2+y2*y2)*(y3-y1) + (x3*x3+y3*y3)*(y1-y2);
  center.x /= ( 2*(x1*(y2-y3) - y1*(x2-x3) + x2*y3 - x3*y2) );

  center.y = (x1*x1 + y1*y1)*(x3-x2) + (x2*x2+y2*y2)*(x1-x3) + (x3*x3 + y3*y3)*(x2-x1);
  center.y /= ( 2*(x1*(y2-y3) - y1*(x2-x3) + x2*y3 - x3*y2) );

  radius = sqrt((center.x-x1)*(center.x-x1) + (center.y-y1)*(center.y-y1));
}



std::vector<cv::Point2f> getPointPositions(cv::Mat binaryImage)
{
 std::vector<cv::Point2f> pointPositions;

 for(unsigned int y=0; y<binaryImage.rows; ++y)
 {
     //unsigned char* rowPtr = binaryImage.ptr<unsigned char>(y);
     for(unsigned int x=0; x<binaryImage.cols; ++x)
     {
         //if(rowPtr[x] > 0) pointPositions.push_back(cv::Point2i(x,y));
         if(binaryImage.at<unsigned char>(y,x) > 0) pointPositions.push_back(cv::Point2f(x,y));
     }
 }

 return pointPositions;
}

input:

enter image description here

output:

enter image description here

console output:

    press q to stop
    accepted circle with 50 % inlier
    circle: center: [358.511, 211.163] radius: 193.849
    accepted circle with 85.7143 % inlier
    circle: center: [45.2273, 171.591] radius: 24.6215
    accepted circle with 100 % inlier
    circle: center: [257.066, 197.066] radius: 27.819
    circle illegal
    30 iterations performed`

optimization should include:

  1. use all inlier to fit a better circle

  2. dont compute distance transform after each detected circles (it's quite expensive). compute inlier from point/edge set directly and remove the inlier edges from that list.

  3. if there are many small circles in the image (and/or a lot of noise), it's unlikely to hit randomly 3 edge pixels or a circle. => try contour detection first and detect circles for each contour. after that try to detect all "other" circles left in the image.

  4. a lot of other stuff

I know that it's little bit late, but I used different approach which is much easier. From the cv2.HoughCircles(...) you get centre of the circle and the diameter (x,y,r). So I simply go through all centre points of the circles and I check if they are further away from the edge of the image than their diameter.

Here is my code:

        height, width = img.shape[:2]

        #test top edge
        up = (circles[0, :, 0] - circles[0, :, 2]) >= 0

        #test left edge
        left = (circles[0, :, 1] - circles[0, :, 2]) >= 0

        #test right edge
        right = (circles[0, :, 0] + circles[0, :, 2]) <= width

        #test bottom edge
        down = (circles[0, :, 1] + circles[0, :, 2]) <= height

        circles = circles[:, (up & down & right & left), :]

@Micka's answer is great, here it is roughly translated into python

The method takes a thresholded image mask as an argument, leaving that part as an exercise for the reader

def get_circle_percentages(image):
    #compute distance transform of image
    dist = cv2.distanceTransform(image, cv2.DIST_L2, 0)
    rows = image.shape[0]
    circles = cv2.HoughCircles(image, cv2.HOUGH_GRADIENT, 1, rows / 8, 50, param1=50, param2=10, minRadius=40, maxRadius=90)      
    minInlierDist = 2.0
    for c in circles[0, :]:
        counter = 0
        inlier = 0

        center = (c[0], c[1])
        radius = c[2]

        maxInlierDist = radius/25.0

        if maxInlierDist < minInlierDist: maxInlierDist = minInlierDist

        for i in np.arange(0, 2*np.pi, 0.1):
            counter += 1
            x = center[0] + radius * np.cos(i)
            y = center[1] + radius * np.sin(i)

            if dist.item(int(y), int(x)) < maxInlierDist:
                inlier += 1
            print(str(100.0*inlier/counter) + ' percent of a circle with radius ' + str(radius) + " detected")

The semicircle detected by the hough algorithm is most probably correct. The issue here might be that unless you strictly control the geometry of the scene, i.e. exact position of the camera relative to the target, so that the image axis is normal to the target plane, you will get ellipsis rather than circles projected on the image plane. Not to mention the distortions caused by the optical system, which further degenerate the geometric figure. If you rely on precision here, I would recommend camera calibration.

You better try with different kernel for gaussian blur.That will help you

GaussianBlur( src_gray, src_gray, Size(11, 11), 5,5);

so change size(i,i),j,j)

Licensed under: CC-BY-SA with attribution
Not affiliated with StackOverflow
scroll top