Question

I tend to do a lot of projects on short deadlines and with lots of code that will never be used again, so there's always pressure/temptation to cut corners. One rule I always stick to is encapsulation/loose coupling, so I have lots of small classes rather than one giant God class. But what else should I never compromise on?

Update - thanks for the great response. Lots of people have suggested unit testing, but I don't think that's really appropriate to the kind of UI coding I do. Usability / User acceptance testing seems much important. To reiterate, I'm talking about the BARE MINIMUM of coding standards for impossible deadline projects.

Was it helpful?

Solution

Not OOP, but a practice that helps in both the short and long run is DRY, Don't Repeat Yourself. Don't use copy/paste inheritance.

OTHER TIPS

Not a OOP practice, but common sense ;-).

If you are in a hurry, and have to write a hack. Always add a piece of comment with the reasons. So you can trace it back and make a good solution later.

If you never had the time to come back, you always have the comment so you know, why the solution was chosen at the moment.

Use Source control.

No matter how long it takes to set up (seconds..), it will always make your life easier! (still it's not OOP related).

Naming. Under pressure you'll write horrible code that you won't have time to document or even comment. Naming variables, methods and classes as explicitly as possible takes almost no additional time and will make the mess readable when you must fix it. From an OOP point of view, using nouns for classes and verbs for methods naturally helps encapsulation and modularity.

Unit tests - helps you sleep at night :-)

This is rather obvious (I hope), but at the very least I always make sure my public interface is as correct as possible. The internals of a class can always be refactored later on.

no public class with mutable public variables (struct-like).

Before you know it, you refer to this public variable all over your code, and the day you decide this field is a computed one and must have some logic in it... the refactoring gets messy.

If that day is before your release date, it gets messier.

Think about the people (may even be your future self) who have to read and understand the code at some point.

Application of the single responsibility principal. Effectively applying this principal generates a lot of positive externalities.

Like everyone else, not as much OOP practices, as much as practices for coding that apply to OOP.

  1. Unit test, unit test, unit test. Defined unit tests have a habit of keeping people on task and not "wandering" aimlessly between objects.
  2. Define and document all hierarchical information (namespaces, packages, folder structures, etc.) prior to writing production code. This helps to flesh out object relations and expose flaws in assumptions related to relationships of objects.
  3. Define and document all applicable interfaces prior to writing production code. If done by a lead or an architect, this practice can additionally help keep more junior-level developers on task.

There are probably countless other "shoulds", but if I had to pick my top three, that would be the list.

Edit in response to comment: This is precisely why you need to do these things up front. All of these sorts of practices make continued maintenance easier. As you assume more risk in the kickoff of a project, the more likely it is that you will spend more and more time maintaining the code. Granted, there is a larger upfront cost, but building on a solid foundation pays for itself. Is your obstacle lack of time (i.e. having to maintain other applications) or a decision from higher up? I have had to fight both of those fronts to be able to adopt these kinds of practices, and it isn't a pleasant situation to be in.

Of course everything should be Unit tested, well designed, commented, checked into source control and free of bugs. But life is not like that.

My personal ranking is this:

  1. Use source control and actually write commit comments. This way you have a tiny bit of documentation should you ever wonder "what the heck did I think when I wrote this?"
  2. Write clean code or document. Clean well-written code should need little documentation, as it's meaning can be grasped from reading it. Hacks are a lot different. Write why you did it, what you do and what you'd like to do if you had the time/knowledge/motivation/... to do it right
  3. Unit Test. Yes it's down on number three. Not because it's unimportant but because it's useless if you don't have the other two at least halfway complete. Writing Unit tests is another level of documentation what you code should be doing (among others).
  4. Refactor before you add something. This might sound like a typical "but we don't have time for it" point. But as with many of those points it usually saves more time than it costs. At least if you have at least some experience with it.

I'm aware that much of this has already been mentioned, but since it's a rather subjective matter, I wanted to add my ranking.

[insert boilerplate not-OOP specific caveat here]

  • Separation of concerns, unit tests, and that feeling that if something is too complex it's probably not conceptualised quite right yet.

  • UML sketching: this has clarified and saved any amount of wasted effort so many times. Pictures are great aren't they? :)

  • Really thinking about is-a's and has-a's. Getting this right first time is so important.

No matter how fast a company wants it, I pretty much always try to write code to the best of my ability.

I don't find it takes any longer and usually saves a lot of time, even in the short-term.

I've can't remember ever writing code and never looking at it again, I always make a few passes over it to test and debug it, and even in those few passes practices like refactoring to keep my code DRY, documentation (to some degree), separation of concerns and cohesion all seem to save time.

This includes crating many more small classes than most people (One concern per class, please) and often extracting initialization data into external files (or arrays) and writing little parsers for that data... Sometimes even writing little GUIs instead of editing data by hand.

Coding itself is pretty quick and easy, debugging crap someone wrote when they were "Under pressure" is what takes all the time!

At almost a year into my current project I finally set up an automated build that pushes any new commits to the test server, and man, I wish I had done that on day one. The biggest mistake I made early-on was going dark. With every feature, enhancement, bug-fix etc, I had a bad case of the "just one mores" before I would let anyone see the product, and it literally spiraled into a six month cycle. If every reasonable change had been automatically pushed out it would have been harder for me to hide, and I would have been more on-track with regard to the stakeholders' involvement.

Go back to code you wrote a few days/weeks ago and spend 20 minutes reviewing your own code. With the passage of time, you will be able to determine whether your "off-the-cuff" code is organized well enough for future maintenance efforts. While you're in there, look for refactoring and renaming opportunities.

I sometimes find that the name I chose for a function at the outset doesn't perfectly fit the function in its final form. With refactoring tools, you can easily change the name early before it goes into widespread use.

Just like everybody else has suggested these recommendations aren't specific to OOP:

Ensure that you comment your code and use sensibly named variables. If you ever have to look back upon the quick and dirty code you've written, you should be able to understand it easily. A general rule that I follow is; if you deleted all of the code and only had the comments left, you should still be able to understand the program flow.

Hacks usually tend to be convoluted and un-intuitive, so some good commenting is essential.

I'd also recommend that if you usually have to work to tight deadlines, get yourself a code library built up based upon your most common tasks. This will allow you to "join the dots" rather than reinvent the wheel each time you have a project.

Regards,

Docta

An actual OOP practice I always make time for is the Single Responsibility Principle, because it becomes so much harder to properly refactor the code later on when the project is "live".
By sticking to this principle I find that the code I write is easily re-used, replaced or rewritten if it fails to match the functional or non-functional requirements. When you end up with classes that have multiple responsibilities, some of them may fulfill the requirements, some may not, and the whole may be entirely unclear.

These kinds of classes are stressful to maintain because you are never sure what your "fix" will break.

For this special case (short deadlines and with lots of code that will never be used again) I suggest you to pay attention to embedding some script engine into your OOP code.

Learn to "refactor as-you-go". Mainly from an "extract method" standpoint. When you start to write a block of sequential code, take a few seconds to decide if this block could stand-alone as a reusable method and, if so, make that method immediately. I recommend it even for throw-away projects (especially if you can go back later and compile such methods into your personal toolbox API). It doesn't take long before you do it almost without thinking.

Hopefully you do this already and I'm preaching to the choir.

Licensed under: CC-BY-SA with attribution
Not affiliated with StackOverflow
scroll top