How do I use Maven through a proxy?

StackOverflow https://stackoverflow.com/questions/1251192

  •  12-09-2019
  •  | 
  •  

Question

I want to share my experience of using maven through a proxy.

You would most likely face exceptions and messages like:

repository metadata for: 'org.apache.maven.plugins' could not be retrieved from 
repository: central due to an error: Error transferring file: Connection refused: connect

or

[WARNING] Failed to retrieve plugin descriptor for org.apache.maven.plugins:maven-clean-
plugin:2.5: Plugin org.apache.maven.plugins:maven-clean-plugin:2.5 or one of its 
dependencies could not be resolved: Failed to read artifact descriptor for 
org.apache.maven.plugins:maven-clean-plugin:jar:2.5

How to configure Maven to use proxy server?

Was it helpful?

Solution 6

Those are caused most likely by 2 issues:

  1. You need to add proxy configuration to your settings.xml. Here's a trick in your username field. Make sure it looks like domain\username. Setting domain there and putting this exact slash is important '\'. You might want to use <![CDATA[]]> tag if your password contains non xml-friendly characters.
  2. I've noticed maven 2.2.0 does not work sometimes through a proxy at all, where 2.2.1 works perfectly fine.

If some of those are omitted - maven could fail with random error messages.

Just hope I've saved somebody from googling around this issue for 6 hours, like I did.

OTHER TIPS

For details of setting up a proxy for Maven, see the mini guide.

Essentially you need to ensure the proxies section in either the global settings ([maven install]/conf/settings.xml), or user settings (${user.home}/.m2/settings.xml) is configured correctly. It is better to do this in your user settings to avoid storing the password in plain text in a public location.

Maven 2.1 introduced password encryption, but I've not got round to checking if the encryption applies for the proxy settings as well as repository passwords (don't see why it wouldn't though).

For info, there is a commented-out proxy configuration in your settings.xml and instructions on how to modify it.

From the mini-guide, your settings should look something like this:

<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0
                  http://maven.apache.org/xsd/settings-1.0.0.xsd">
[...]
  <proxies>
    <proxy>
      <active>true</active>
      <protocol>http</protocol>
      <host>proxy.somewhere.com</host>
      <port>8080</port>
      <username>proxyuser</username>
      <password>somepassword</password>
      <nonProxyHosts>www.google.com|*.somewhere.com</nonProxyHosts>
    </proxy>
  </proxies>
[...]
</settings>

How to use a socks proxy?

Set up a SSH tunnel to a server somewhere:

ssh -D $PORT $USER@$SERVER

Linux (bash):

export MAVEN_OPTS="-DsocksProxyHost=127.0.0.1 -DsocksProxyPort=$PORT"

Windows:

set MAVEN_OPTS="-DsocksProxyHost=127.0.0.1 -DsocksProxyPort=$PORT"

Also note that some plugins (remote-resources comes to mind) use a really old library that only accepts proxy configuration through MAVEN_OPTS;

-Dhttp.proxyHost=<host> -Dhttp.proxyPort=<port> -Dhttps.proxyHost=<host> -Dhttps.proxyPort=<port>

You might be stuck on auth for this one.

I also had this problem, and I solved it by editing the settings.xml file in my .m2 folder. My settings.xml is like this now:

<settings>
  <proxies>
    <proxy>
      <id>genproxy</id>
      <active>true</active>
      <protocol>http</protocol>
      <host>proxyHost</host>
      <port>3128</port>
      <username>username</username>
      <password>password</password>
    </proxy>
 </proxies>
</settings>

To set Maven Proxy :

Edit the proxies session in your ~/.m2/settings.xml file. If you cant find the file, create one.

<settings>
<proxies>
    <proxy>
        <id>httpproxy</id>
        <active>true</active>
        <protocol>http</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
<proxy>
        <id>httpsproxy</id>
        <active>true</active>
        <protocol>https</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>

</proxies>
</settings>

or

Edit the proxies session in your {M2_HOME}/conf/settings.xml

Hope it Helps.. :)

Just to add my own experiences with this: my company's proxy is http://webproxy.intra.companyname.com:3128. For maven to work via this proxy, the settings have to be exactly like this

<settings>
  <proxies>
    <proxy>
      <id>default</id>
      <active>true</active>
      <protocol>http</protocol>
      <host>webproxy.intra.companyname.com</host>
      <port>3128</port>
    </proxy>
  </proxies>
</settings>

Unlike some other proxy-configuration files, the protocol here describes how to connect to the proxy server, not which kinds of protocol should be proxied. The http part of the target has to be split off from the hostname, else it won't work.

Thanks @krosenvold.

If the settings file changes don't work, try this in the command prompt having the POM file.

mvn install -Dhttp.proxyHost=abcproxy -Dhttp.proxyPort=8080 -Dhttps.proxyHost=abcproxy -Dhttps.proxyPort=8080

This has helped me immediately after a password change.

I run cntlm localy, configured with NTLMv2 password hashes to authenticate with the corporate proxy, and use 

export MAVEN_OPTS="-DproxyHost=127.0.0.1 -DproxyPort=3128"

to use that proxy from maven. Of course the proxy you use should support cntlm/NTLMv2.

And to add to this topic, here're my experiences below... Really odd and time consuming so I thought it was worth adding.

I've had a similar problem trying to built the portlet-bridge on Windows, getting the following errors:

Downloading: http://repo1.maven.org/maven2/org/apache/portals/bridges-pom/1.0/bridges-pom-1.0.pom
[DEBUG] Reading resolution tracking file C:\Documents and Settings\myuser\.m2\repository\org\apache\portals\bridges-pom\1.0\bridges-pom-1.0.pom.lastUpdated
[DEBUG] Writing resolution tracking file C:\Documents and Settings\myuser\.m2\repository\org\apache\portals\bridges-pom\1.0\bridges-pom-1.0.pom.lastUpdated
[ERROR] The build could not read 1 project -> [Help 1]
org.apache.maven.project.ProjectBuildingException: Some problems were encountered while processing the POMs:
[FATAL] Non-resolvable parent POM: Could not transfer artifact
org.apache.portals:bridges-pom:pom:1.0 from/to central (http://repo1.maven.org/maven2): Error transferring file: repo1.maven.org and 'parent.relativePath' points at wrong local
POM @ line 23, column 11
...
[ERROR]   The project org.apache.portals.bridges:portals-bridges-common:2.0 (H:\path_to_project\portals-bridges-common-2.0\pom.xml) has 1 error
[ERROR]     Non-resolvable parent POM: Could not transfer artifact org.apache.portals:bridges-pom:pom:1.0 from/to central (http://repo1.maven.org/maven2):
Error transferring file: repo1.maven.org and 'parent.relativePath' points at wrong local POM @ line 23, column 11: Unknown host repo1.maven.org -> [Help 2]
...
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
[ERROR] [Help 2] http://cwiki.apache.org/confluence/display/MAVEN/UnresolvableModelException

I tried a couple of things, following a bit of surfing:

  • Tried to set the parent.relativePath as empty so that maven didn't think the parent was local. This is as per the suggestion on SO at Hudson build fail: Non-resolvable parent POM and in this nabble forum. This had no effect.

  • I also tried ensuring the repository was explicitly listed in my settings.xml but this had no effect either.

  • I then ensured mvn was forced to lookup the repository, rather than rely on it's own history, as discussed in this blog by Sarthon. Unfortunately, this wasn't the issue either.

  • In some desperation, I then revisited my MAVEN_OPTS to ensure I wasn't falling foul of my proxy settings. These were correct, albeit with the value unquoted:

    set MAVEN_OPTS= -Dhttp.proxyHost=myproxy.mycompany.com -Dhttp.proxyPort=8080 -Xmx256m

  • So, finally, I moved the proxy config into my settings.xml and this worked:

    <proxies>
      <proxy>
        <id>genproxy</id>
        <active>true</active>
        <protocol>http</protocol>
        <!--username>proxyuser</username-->
        <!--password>proxypass</password-->
        <host>myproxy.mycompany.com</host>
        <port>8080</port>
        <nonProxyHosts>*.mycompany.com|127.0.0.1</nonProxyHosts>
      </proxy>
    </proxies>

Really not sure why my original MAVEN_OPTS wasn't working (quotes?) while the settings.xml config did work. I'd like to reverse the fix and check each step again but have wasted too much time. Will report back as and when.

I know this is not really an answer to the question, but it might be worth knowing for someone searching this post. It is also possible to install a Maven repository proxy like nexus.

Your maven would be configured to contact the local Nexus proxy, and Nexus would then retrieve (and cache) the artifacts. It can be configured through a web interface and has support for (http) proxies).

This can be an advantage, especially in a company setting, as artefacts are locally available and can be downloaded fast, and you are not that dependent on the availability of external Maven repositories anymore.

To link back to the question; with Nexus there is a nice GUI for the proxy configuration, and it needs to be done on one place only, and not for every developer.

If maven works through proxy but not some of the plugins it is invoking, try setting JAVA_TOOL_OPTIONS as well with -Dhttp*.proxy* settings.

If you have already JAVA_OPTS just do

export JAVA_TOOL_OPTIONS=$JAVA_OPTS

if you are new to proxy setup for Maven In my case first go and check your Home Folder weather there is .m2 folder and in it there should be a file named settings.xml if not create it , and paste this and change host and port,then if needed change the nonProxyHosts

Home Folder - C:\Users\ {UserName}

<settings>
<proxies>
    <proxy>
        <id>httpproxy</id>
        <active>true</active>
        <protocol>http</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>localhost</nonProxyHosts>
    </proxy>
<proxy>
        <id>httpsproxy</id>
        <active>true</active>
        <protocol>https</protocol>
        <host>your-proxy-host</host>
        <port>your-proxy-port</port>
        <nonProxyHosts>localhost</nonProxyHosts>
    </proxy>

</proxies>
</settings>

If any case this does not success go and do the changes in this location of Home Folder 

/conf/settings.xml

I am using Eclipse as my IDE
Hope this will help !!

Except for techniques mentioned above, with some effort, you can run maven through proxy using jproxyloader library (there is example on page how to do this: http://jproxyloader.sourceforge.net/). This allows set up socks proxy only for downloading artifacts.

In solution mentioned by duanni (setting -DsocksProxyHost) there is one problem. If you have integration tests running against local database (or another tests connecting to url which should not go via proxy). These tests will stop working because connections to database will also be directed to proxy. With help of jProxyLoader you can set up proxy only for nexus host. Additionally if you want you can pass connections to database through another proxy.

Some times you need to add other <proxy></proxy> tags, and specify the https in the protocol tags: <protocol>https</protocol>

The above postings helped in resolving my problem. In addition to the above I had to make the following changes to make it work :

  • Modified Maven's JRE net settings(\jre\lib\net.properties) to use system proxy setting.

    https.proxyHost=proxy DNS
https.proxyPort=proxy port

  • Included proxy server settings in settings.xml. I did not provide username and password settings as to use NTLM authentication.

Licensed under: CC-BY-SA with attribution
Not affiliated with StackOverflow
scroll top