“Invalid signature file” when attempting to run a .jar
https://stackoverflow.com/questions/999489
-
14-09-2019 - |
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianQuestion
My java program is packaged in a jar file and makes use of an external jar library, bouncy castle. My code compiles fine, but running the jar leads to the following error:
Exception in thread "main" java.lang.SecurityException: Invalid signature file digest for Manifest main attributes
I've googled for over an hour searching for an explanation and found very little of value. If anyone has seen this error before and could offer some help, I would be obliged.
Solution
The solution listed here might provide a pointer.
Bottom line :
It's probably best to keep the official jar as is and just add it as a dependency in the manifest file for your application jar file.
OTHER TIPS
For those who got this error when trying to create an uber-jar with maven-shade-plugin, the solution is to exclude manifest signature files by adding the following lines to the plugin configuration:
<configuration>
<filters>
<filter>
<artifact>*:*</artifact>
<excludes>
<exclude>META-INF/*.SF</exclude>
<exclude>META-INF/*.DSA</exclude>
<exclude>META-INF/*.RSA</exclude>
</excludes>
</filter>
</filters>
<!-- Additional configuration. -->
</configuration>
For those using gradle and trying to create and use a fat jar, the following syntax might help.
jar {
doFirst {
from { configurations.compile.collect { it.isDirectory() ? it : zipTree(it) } }
}
exclude 'META-INF/*.RSA', 'META-INF/*.SF','META-INF/*.DSA'
}
Some of your dependencies are likely signed jarfiles. When you combine them all into one big jarfile, the corresponding signature files are still present, and no longer match the "big combined" jarfile, so the runtime halts thinking the jar file has been tampered with (which it...has so to speak).
You can solve the problem by eliminating the signature files from your jarfile dependencies. Unfortunately, it's not possible to do this in one step in ant.
However, I was able to get this working with Ant in two steps, without specifically naming each jarfile dependency, by using:
<target name="jar" depends="compile" description="Create one big jarfile.">
<jar jarfile="${output.dir}/deps.jar">
<zipgroupfileset dir="jars">
<include name="**/*.jar" />
</zipgroupfileset>
</jar>
<sleep seconds="1" />
<jar jarfile="${output.dir}/myjar.jar" basedir="${classes.dir}">
<zipfileset src="${output.dir}/deps.jar" excludes="META-INF/*.SF" />
<manifest>
<attribute name="Main-Class" value="com.mycompany.MyMain" />
</manifest>
</jar>
</target>
The sleep element is supposed to prevent errors about files with modification dates in the future.
Other variations I found in the linked threads didn't work for me.
Please use the following command
zip -d yourjar.jar 'META-INF/*.SF' 'META-INF/*.RSA' 'META-INF/*SF'
I had this problem when using IntelliJ IDEA 14.01.
I was able to fix it by:
File->Project Structure->Add New (Artifacts)->jar->From Modules With Dependencies on the Create Jar From Module Window:
Select you main class
JAR File from Libraries Select copy to the output directory and link via manifest
Security is already a tough topic, but I'm disappointed to see the most popular solution is to delete the security signatures. JCE requires these signatures. Maven shade explodes the BouncyCastle jar file which puts the signatures into META-INF, but the BouncyCastle signatures aren't valid for a new, uber-jar (only for the BC jar), and that's what causes the Invalid signature error in this thread.
Yes, excluding or deleting the signatures as suggested by @ruhsuzbaykus does indeed make the original error go away, but it can also lead to new, cryptic errors:
java.security.NoSuchAlgorithmException: PBEWithSHA256And256BitAES-CBC-BC SecretKeyFactory not available
By explicitly specifying where to find the algorithm like this:
SecretKeyFactory.getInstance("PBEWithSHA256And256BitAES-CBC-BC","BC");
I was able to get a different error:
java.security.NoSuchProviderException: JCE cannot authenticate the provider BC
JCE can't authenticate the provider because we've deleted the cryptographic signatures by following the suggestion elsewhere in this same thread.
The solution I found was the executable packer plugin that uses a jar-in-jar approach to preserve the BouncyCastle signature in a single, executable jar.
UPDATE:
Another way to do this (the correct way?) is to use Maven Jar signer. This allows you to keep using Maven shade without getting security errors. HOWEVER, you must have a code signing certificate (Oracle suggests searching for "Java Code Signing Certificate"). The POM config looks like this:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-shade-plugin</artifactId>
<version>3.1.0</version>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>shade</goal>
</goals>
<configuration>
<filters>
<filter>
<artifact>org.bouncycastle:*</artifact>
<excludes>
<exclude>META-INF/*.SF</exclude>
<exclude>META-INF/*.DSA</exclude>
<exclude>META-INF/*.RSA</exclude>
</excludes>
</filter>
</filters>
<transformers>
<transformer implementation="org.apache.maven.plugins.shade.resource.ManifestResourceTransformer">
<mainClass>your.class.here</mainClass>
</transformer>
</transformers>
<shadedArtifactAttached>true</shadedArtifactAttached>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-jarsigner-plugin</artifactId>
<version>1.4</version>
<executions>
<execution>
<id>sign</id>
<goals>
<goal>sign</goal>
</goals>
</execution>
<execution>
<id>verify</id>
<goals>
<goal>verify</goal>
</goals>
</execution>
</executions>
<configuration>
<keystore>/path/to/myKeystore</keystore>
<alias>myfirstkey</alias>
<storepass>111111</storepass>
<keypass>111111</keypass>
</configuration>
</plugin>
No, there's no way to get JCE to recognize a self-signed cert, so if you need to preserve the BouncyCastle certs, you have to either use the jar-in-jar plugin or get a JCE cert.
Assuming you build your jar file with ant, you can just instruct ant to leave out the META-INF dir. This is a simplified version of my ant target:
<jar destfile="app.jar" basedir="${classes.dir}">
<zipfileset excludes="META-INF/**/*" src="${lib.dir}/bcprov-jdk16-145.jar"></zipfileset>
<manifest>
<attribute name="Main-Class" value="app.Main"/>
</manifest>
</jar>
I faced the same issue, after reference somewhere, it worked as below changing:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-shade-plugin</artifactId>
<version>3.2.1</version>
<configuration>
<createDependencyReducedPom>false</createDependencyReducedPom>
</configuration>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>shade</goal>
</goals>
<configuration>
<filters>
<filter>
<artifact>*:*</artifact>
<excludes>
<exclude>META-INF/*.SF</exclude>
<exclude>META-INF/*.DSA</exclude>
<exclude>META-INF/*.RSA</exclude>
</excludes>
</filter>
</filters>
</configuration>
</execution>
</executions>
</plugin>
I've recently started using IntelliJ on my projects. However, some of my colleagues still use Eclipse on the same projects. Today, I've got the very same error after executing the jar-file created by my IntelliJ. While all the solutions in here talking about almost the same thing, none of them worked for me easily (possibly because I don't use ANT, maven build gave me other errors which referred me to http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException, and also I couldn't figure out what are the signed jars by myself!)
Finally, this helped me
zip -d demoSampler.jar 'META-INF/*.SF' 'META-INF/*.RSA' 'META-INF/*SF'
Guess what's been removed from my jar file?!
deleting: META-INF/ECLIPSE_.SF
deleting: META-INF/ECLIPSE_.RSA
It seems that the issue was relevant to some eclipse-relevant files.
Compare the folder META-INF in new jar with old jar (before you added new libraries). It is possibility that there will be new files. If yes, you can remove them. It should helps. Regards, 999michal
Error: A JNI error has occurred, please check your installation and try again Exception in thread "main" java.lang.SecurityException: Invalid signature file digest for Manifest main attributes at sun.security.util.SignatureFileVerifier.processImpl(SignatureFileVerifier.java:314) at sun.security.util.SignatureFileVerifier.process(SignatureFileVerifier.java:268) at java.util.jar.JarVerifier.processEntry(JarVerifier.java:316) at java.util.jar.JarVerifier.update(JarVerifier.java:228) at java.util.jar.JarFile.initializeVerifier(JarFile.java:383) at java.util.jar.JarFile.getInputStream(JarFile.java:450) at sun.misc.URLClassPath$JarLoader$2.getInputStream(URLClassPath.java:977) at sun.misc.Resource.cachedInputStream(Resource.java:77) at sun.misc.Resource.getByteBuffer(Resource.java:160) at java.net.URLClassLoader.defineClass(URLClassLoader.java:454) at java.net.URLClassLoader.access$100(URLClassLoader.java:73) at java.net.URLClassLoader$1.run(URLClassLoader.java:368) at java.net.URLClassLoader$1.run(URLClassLoader.java:362) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:361) at java.lang.ClassLoader.loadClass(ClassLoader.java:424) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:331) at java.lang.ClassLoader.loadClass(ClassLoader.java:357) at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:495)
What helped me (IntelliJ IDEA 2016.3): File -> Project Structure -> Artifacts -> Add JAR -> Select Main Class -> Choose "copy to the output directory and link via manifest" -> OK -> Apply -> Build -> Build Artifacts... -> Build
In case you're using gradle, here is a full farJar task:
version = '1.0'
//create a single Jar with all dependencies
task fatJar(type: Jar) {
manifest {
attributes 'Implementation-Title': 'Gradle Jar File Example',
'Implementation-Version': version,
'Main-Class': 'com.example.main'
}
baseName = project.name + '-all'
from { configurations.compile.collect { it.isDirectory() ? it : zipTree(it) } }
exclude 'META-INF/*.RSA', 'META-INF/*.SF','META-INF/*.DSA'
with jar
}
It's possible that two different signers mess up java mind.
Try removing META-INF folder from jar, adding manifest and signing JAR again, it helped me: http://jehy.ru/articles/2013/12/13/invalid-signature-file-digest-for-manifest-main-attributes/
A strategy would consist in using ANT to simplify the removal of the signature from each Jar file. It would proceed with the following steps:
- Copying the MANIFEST.MF in a temporary file
- Removing the Name and SHA entries from the temporary file
- Creating a temporary Jar file with the temporary manifest
- Removing the temporary manifest
- Swapping the original Jar file with the temporary one
Here is an ANT macrodef doing the work:
<macrodef name="unsignjar" description="To unsign a specific Jar file">
<attribute name="jarfile"
description="The jar file to unsign" />
<sequential>
<!-- Copying to the temporary manifest file -->
<copy toFile="@{jarFile}_MANIFEST.tmp">
<resources>
<zipentry zipfile="@{jarFile}" name="META-INF/MANIFEST.MF"/>
</resources>
</copy>
<!-- Removing the Name and SHA entries from the temporary file -->
<replaceregexp file="@{jarFile}_MANIFEST.tmp" match="\nName:(.+?)\nSH" replace="SH" flags="gis" byline="false"/>
<replaceregexp file="@{jarFile}_MANIFEST.tmp" match="SHA(.*)" replace="" flags="gis" byline="false"/>
<!-- Creating a temporary Jar file with the temporary manifest -->
<jar jarfile="@{jarFile}.tmp"
manifest="@{jarFile}_MANIFEST.tmp">
<zipfileset src="@{jarFile}">
<include name="**"/>
<exclude name="META-INF/*.SF"/>
<exclude name="META-INF/*.DSA"/>
<exclude name="META-INF/*.RSA"/>
</zipfileset>
</jar>
<!-- Removing the temporary manifest -->
<delete file="@{jarFile}_MANIFEST.tmp" />
<!-- Swapping the original Jar file with the temporary one -->
<move file="@{jarFile}.tmp"
tofile="@{jarFile}"
overwrite="true" />
</sequential>
`
The definition can then be called this way in an ANT task:
<target name="unsignJar">
<unsignjar jarFile="org.test.myjartounsign.jar" />
</target>
If you are looking for a Fat JAR solution without unpacking or tampering with the original libraries but with a special JAR classloader, take a look at my project here.
Disclaimer: I did not write the code, just package it and publish it on Maven Central and describe in my read-me how to use it.
I personally use it for creating runnable uber JARs containing BouncyCastle dependencies. Maybe it is useful for you, too.
I had the same issue in gradle when creating a fat Jar, updating the build.gradle file with an exclude line corrected the issue.
jar {
from {
configurations.compile.collect {
it.isDirectory() ? it : zipTree(it)
}
}
exclude 'META-INF/*.RSA', 'META-INF/*.SF','META-INF/*.DSA'
manifest {
attributes 'Main-Class': 'com.test.Main'
}
}
For those who have trouble with the accepted solution, there is another way to exclude resource from shaded jar with DontIncludeResourceTransformer:
<transformers>
<transformer implementation="org.apache.maven.plugins.shade.resource.DontIncludeResourceTransformer">
<resource>BC1024KE.DSA</resource>
</transformer>
</transformers>
From Shade 3.0, this transformer accepts a list of resources. Before that you just need to use multiple transformer each with one resource.
I had a similar problem. The reason was that I was compiling using a JDK with a different JRE than the default one in my Windows box.
Using the correct java.exe solved my problem.
If you're getting this when trying to bind JAR files for a Xamarin.Android bindings project like so:
JARTOXML : warning J2XA006: missing class error was raised while reflecting com.your.class : Invalid signature file digest for Manifest main attributes
Just open the JAR files using Winzip and delete the meta-inf directories. Rebuild - job done
