Easy way to write contents of a Java InputStream to an OutputStream

Question

I was surprised to find today that I couldn't track down any simple way to write the contents of an InputStream to an OutputStream in Java. Obviously, the byte buffer code isn't difficult to write, but I suspect I'm just missing something which would make my life easier (and the code clearer).

So, given an InputStream in and an OutputStream out, is there a simpler way to write the following?

byte[] buffer = new byte[1024];
int len = in.read(buffer);
while (len != -1) {
    out.write(buffer, 0, len);
    len = in.read(buffer);
}

Answer 1

If you are using Java 7, Files (in the standard library) is the best approach:

/* You can get Path from file also: file.toPath() */
Files.copy(InputStream in, Path target)
Files.copy(Path source, OutputStream out)

Edit: Of course it's just useful when you create one of InputStream or OutputStream from file. Use file.toPath() to get path from file.

To write into an existing file (e.g. one created with File.createTempFile()), you'll need to pass the REPLACE_EXISTING copy option (otherwise FileAlreadyExistsException is thrown):

Files.copy(in, target, StandardCopyOption.REPLACE_EXISTING)

Answer 2

As WMR mentioned, org.apache.commons.io.IOUtils from Apache has a method called copy(InputStream,OutputStream) which does exactly what you're looking for.

So, you have:

InputStream in;
OutputStream out;
IOUtils.copy(in,out);
in.close();
out.close();

...in your code.

Is there a reason you're avoiding IOUtils?

Answer 3

Java 9

Since Java 9, InputStream provides a method called transferTo with the following signature:

public long transferTo(OutputStream out) throws IOException

As the documentation states, transferTo will:

Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read. On return, this input stream will be at end of stream. This method does not close either stream.

This method may block indefinitely reading from the input stream, or writing to the output stream. The behavior for the case where the input and/or output stream is asynchronously closed, or the thread interrupted during the transfer, is highly input and output stream specific, and therefore not specified

So in order to write contents of a Java InputStream to an OutputStream, you can write:

input.transferTo(output);

Answer 4

I think this will work, but make sure to test it... minor "improvement", but it might be a bit of a cost at readability.

byte[] buffer = new byte[1024];
int len;
while ((len = in.read(buffer)) != -1) {
    out.write(buffer, 0, len);
}

Answer 5

Using Guava's ByteStreams.copy():

ByteStreams.copy(inputStream, outputStream);

Answer 6

Simple Function

If you only need this for writing an InputStream to a File then you can use this simple function:

private void copyInputStreamToFile( InputStream in, File file ) {
    try {
        OutputStream out = new FileOutputStream(file);
        byte[] buf = new byte[1024];
        int len;
        while((len=in.read(buf))>0){
            out.write(buf,0,len);
        }
        out.close();
        in.close();
    } catch (Exception e) {
        e.printStackTrace();
    }
}

Answer 7

PipedInputStream and PipedOutputStream should only be used when you have multiple threads, as noted by the Javadoc.

Also, note that input streams and output streams do not wrap any thread interruptions with IOExceptions... So, you should consider incorporating an interruption policy to your code:

byte[] buffer = new byte[1024];
int len = in.read(buffer);
while (len != -1) {
    out.write(buffer, 0, len);
    len = in.read(buffer);
    if (Thread.interrupted()) {
        throw new InterruptedException();
    }
}

This would be an useful addition if you expect to use this API for copying large volumes of data, or data from streams that get stuck for an intolerably long time.

Answer 8

The JDK uses the same code so it seems like there is no "easier" way without clunky third party libraries (which probably don't do anything different anyway). The following is directly copied from java.nio.file.Files.java:

// buffer size used for reading and writing
    private static final int BUFFER_SIZE = 8192;

/**
     * Reads all bytes from an input stream and writes them to an output stream.
     */
    private static long copy(InputStream source, OutputStream sink)
        throws IOException
    {
        long nread = 0L;
        byte[] buf = new byte[BUFFER_SIZE];
        int n;
        while ((n = source.read(buf)) > 0) {
            sink.write(buf, 0, n);
            nread += n;
        }
        return nread;
    }

Answer 9

For those who use Spring framework there is a useful StreamUtils class:

StreamUtils.copy(in, out);

The above does not close the streams. If you want the streams closed after the copy, use FileCopyUtils class instead:

FileCopyUtils.copy(in, out);

Answer 10

There's no way to do this a lot easier with JDK methods, but as Apocalisp has already noted, you're not the only one with this idea: You could use IOUtils from Jakarta Commons IO, it also has a lot of other useful things, that IMO should actually be part of the JDK...

Answer 11

Using Java7 and try-with-resources, comes with a simplified and readable version.

    try(InputStream inputStream     =   new FileInputStream("C:\\mov.mp4");
        OutputStream outputStream   =   new FileOutputStream("D:\\mov.mp4")){

        byte[] buffer    =   new byte[10*1024];

        for (int length; (length = inputStream.read(buffer)) != -1; ){
            outputStream.write(buffer, 0, length);
        }

    }catch (FileNotFoundException exception){
        exception.printStackTrace();
    }catch (IOException ioException){
        ioException.printStackTrace();
    }

Answer 12

Use Commons Net's Util class:

import org.apache.commons.net.io.Util;
...
Util.copyStream(in, out);

Answer 13

Here comes how I'm doing with simplest for loop.

private void copy(final InputStream in, final OutputStream out)
    throws IOException {
    final byte[] b = new byte[8192];
    for (int r; (r = in.read(b)) != -1;) {
        out.write(b, 0, r);
    }
}

Answer 14

A IMHO more minimal snippet (that also more narrowly scopes the length variable):

byte[] buffer = new byte[2048];
for (int n = in.read(buffer); n >= 0; n = in.read(buffer))
    out.write(buffer, 0, n);

As a side note, I don't understand why more people don't use a for loop, instead opting for a while with an assign-and-test expression that is regarded by some as "poor" style.

Answer 15

I think it's better to use a large buffer, because most of the files are greater than 1024 bytes. Also it's a good practice to check the number of read bytes to be positive.

byte[] buffer = new byte[4096];
int n;
while ((n = in.read(buffer)) > 0) {
    out.write(buffer, 0, n);
}
out.close();

Answer 16

PipedInputStream and PipedOutputStream may be of some use, as you can connect one to the other.

Answer 17

Another possible candidate are the Guava I/O utilities:

http://code.google.com/p/guava-libraries/wiki/IOExplained

I thought I'd use these since Guava is already immensely useful in my project, rather than adding yet another library for one function.

Answer 18

I use BufferedInputStream and BufferedOutputStream to remove the buffering semantics from the code

try (OutputStream out = new BufferedOutputStream(...);
     InputStream in   = new BufferedInputStream(...))) {
  int ch;
  while ((ch = in.read()) != -1) {
    out.write(ch);
  }
}

Answer 19

public static boolean copyFile(InputStream inputStream, OutputStream out) {
    byte buf[] = new byte[1024];
    int len;
    long startTime=System.currentTimeMillis();

    try {
        while ((len = inputStream.read(buf)) != -1) {
            out.write(buf, 0, len);
        }

        long endTime=System.currentTimeMillis()-startTime;
        Log.v("","Time taken to transfer all bytes is : "+endTime);
        out.close();
        inputStream.close();

    } catch (IOException e) {

        return false;
    }
    return true;
}

Answer 20

Try Cactoos:

new LengthOf(new TeeInput(input, output)).value();

More details here: http://www.yegor256.com/2017/06/22/object-oriented-input-output-in-cactoos.html

Answer 21

you can use this method

public static void copyStream(InputStream is, OutputStream os)
 {
     final int buffer_size=1024;
     try
     {
         byte[] bytes=new byte[buffer_size];
         for(;;)
         {
           int count=is.read(bytes, 0, buffer_size);
           if(count==-1)
               break;
           os.write(bytes, 0, count);
         }
     }
     catch(Exception ex){}
 }