How do I discard unstaged changes in Git?

Question

How do I discard changes in my working copy that are not in the index?

Answer 1

Another quicker way is:

git stash save --keep-index --include-untracked

You don't need to include --include-untracked if you don't want to be thorough about it.

After that, you can drop that stash with a git stash drop command if you like.

Answer 2

For all unstaged files in current working directory use:

git checkout -- .

For a specific file use:

git checkout -- path/to/file/to/revert

-- here to remove argument ambiguation.

Answer 3

It seems like the complete solution is:

git clean -df
git checkout -- .

git clean removes all untracked files (warning: while it won't delete ignored files mentioned directly in .gitignore, it may delete ignored files residing in folders) and git checkout clears all unstaged changes.

Answer 4

This checks out the current index for the current directory, throwing away all changes in files from the current directory downwards.

git checkout .

or this which checks out all files from the index, overwriting working tree files.

git checkout-index -a -f

Answer 5

git clean -df

Cleans the working tree by recursively removing files that are not under version control, starting from the current directory.

-d: Remove untracked directories in addition to untracked files

-f: Force (might be not necessary depending on clean.requireForce setting)

Run git help clean to see the manual

Answer 6

My favorite is

git checkout -p

That lets you selectively revert chunks.

See also:

git add -p

Answer 7

Since no answer suggests the exact option combination that I use, here it is:

git clean -dfx
git checkout .

This is the online help text for the used git clean options:

-d

Remove untracked directories in addition to untracked files. If an untracked directory is managed by a different Git repository, it is not removed by default. Use -f option twice if you really want to remove such a directory.

-f

If the Git configuration variable clean.requireForce is not set to false, Git clean will refuse to delete files or directories unless given -f, -n, or -i. Git will refuse to delete directories within the .git subdirectory or file, unless a second -f is given.

-x

Don’t use the ignore rules from .gitignore (per directory) and $GIT_DIR/info/exclude, but do still use the ignore rules given with -e options. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with git reset) to create a pristine working directory to test a clean build.

Also, git checkout . needs to be done in the root of the repo.

Answer 8

I really found this article helpful for explaining when to use what command: http://www.szakmeister.net/blog/2011/oct/12/reverting-changes-git/

There are a couple different cases:

1. If you haven't staged the file, then you use git checkout. Checkout "updates files in the working tree to match the version in the index". If the files have not been staged (aka added to the index)... this command will essentially revert the files to what your last commit was.

   git checkout -- foo.txt

2. If you have staged the file, then use git reset. Reset changes the index to match a commit.

   git reset -- foo.txt

I suspect that using git stash is a popular choice since it's a little less dangerous. You can always go back to it if you accidently blow too much away when using git reset. Reset is recursive by default.

Take a look at the article above for further advice.

Answer 9

The easiest way to do this is by using this command:

This command is used to discard changes in working directory -

git checkout -- .

https://git-scm.com/docs/git-checkout

In git command, stashing of untracked files is achieved by using:

git stash -u

http://git-scm.com/docs/git-stash

Answer 10

If you merely wish to remove changes to existing files, use checkout (documented here).

git checkout -- .

• No branch is specified, so it checks out the current branch.
• The double-hyphen (--) tells Git that what follows should be taken as its second argument (path), that you skipped specification of a branch.
• The period (.) indicates all paths.

If you want to remove files added since your last commit, use clean (documented here):

git clean -i 

• The -i option initiates an interactive clean, to prevent mistaken deletions.
• A handful of other options are available for a quicker execution; see the documentation.

If you wish to move changes to a holding space for later access, use stash (documented here):

git stash

• All changes will be moved to Git's Stash, for possible later access.
• A handful of options are available for more nuanced stashing; see the documentation.

Answer 11

If you aren't interested in keeping the unstaged changes (especially if the staged changes are new files), I found this handy:

git diff | git apply --reverse

Answer 12

As you type git status, (use "git checkout -- ..." to discard changes in working directory) is shown.

e.g. git checkout -- .

Answer 13

git checkout -f

---

man git-checkout:

-f, --force

When switching branches, proceed even if the index or the working tree differs from HEAD. This is used to throw away local changes.

When checking out paths from the index, do not fail upon unmerged entries; instead, unmerged entries are ignored.

Answer 14

You can use git stash - if something goes wrong, you can still revert from the stash. Similar to some other answer here, but this one also removes all unstaged files and also all unstaged deletes:

git add .
git stash

if you check that everything is OK, throw the stash away:

git stash drop

The answer from Bilal Maqsood with git clean also worked for me, but with the stash I have more control - if I do sth accidentally, I can still get my changes back

UPDATE

I think there is 1 more change (don't know why this worked for me before):

git add . -A instead of git add .

without the -A the removed files will not be staged

Answer 15

Instead of discarding changes, I reset my remote to the origin. Note - this method is to completely restore your folder to that of the repo.

So I do this to make sure they don't sit there when I git reset (later - excludes gitignores on the Origin/branchname)

NOTE: If you want to keep files not yet tracked, but not in GITIGNORE you may wish to skip this step, as it will Wipe these untracked files not found on your remote repository (thanks @XtrmJosh).

git add --all

Then I

git fetch --all

Then I reset to origin

git reset --hard origin/branchname

That will put it back to square one. Just like RE-Cloning the branch, WHILE keeping all my gitignored files locally and in place.

Updated per user comment below: Variation to reset the to whatever current branch the user is on.

git reset --hard @{u}

Answer 16

Tried all the solutions above but still couldn't get rid of new, unstaged files.

Use git clean -f to remove those new files - with caution though! Note the force option.

Answer 17

simply say

git stash

It will remove all your local changes. You also can use later by saying

git stash apply 

or git stash pop

Answer 18

Just use:

git stash -u

Done. Easy.

If you really care about your stash stack then you can follow with git stash drop. But at that point you're better off using (from Mariusz Nowak):

git checkout -- .
git clean -df

Nonetheless, I like git stash -u the best because it "discards" all tracked and untracked changes in just one command. Yet git checkout -- . only discards tracked changes, and git clean -df only discards untracked changes... and typing both commands is far too much work :)

Answer 19

This works even in directories that are; outside of normal git permissions.

sudo chmod -R 664 ./* && git checkout -- . && git clean -dfx

Happened to me recently

Answer 20

cd path_to_project_folder  # take you to your project folder/working directory 
git checkout .             # removes all unstaged changes in working directory

Answer 21

No matter what state your repo is in you can always reset to any previous commit:

git reset --hard <commit hash>

---

This will discard all changes which were made after that commit.

Answer 22

Another way to get rid of new files that is more specific than git clean -df (it will allow you to get rid of some files not necessarily all), is to add the new files to the index first, then stash, then drop the stash.

This technique is useful when, for some reason, you can't easily delete all of the untracked files by some ordinary mechanism (like rm).

Answer 23

In my opinion,

git clean -df

should do the trick. As per Git documentation on git clean

git-clean - Remove untracked files from the working tree

Description

Cleans the working tree by recursively removing files that are not under version control, starting from the current directory.

Normally, only files unknown to Git are removed, but if the -x option is specified, ignored files are also removed. This can, for example, be useful to remove all build products.

If any optional ... arguments are given, only those paths are affected.

Options

-d Remove untracked directories in addition to untracked files. If an untracked directory is managed by a different Git repository, it is not removed by default. Use -f option twice if you really want to remove such a directory.

-f --force If the Git configuration variable clean.requireForce is not set to false, git clean will refuse to run unless given -f, -n or -i.

Answer 24

What follows is really only a solution if you are working with a fork of a repository where you regularly synchronize (e.g. pull request) with another repo. Short answer: delete fork and refork, but read the warnings on github.

I had a similar problem, perhaps not identical, and I'm sad to say my solution is not ideal, but it is ultimately effective.

I would often have git status messages like this (involving at least 2/4 files):

$ git status
# Not currently on any branch.
# Changes to be committed:
#   (use "git reset HEAD <file>..." to unstage)
#
#       modified:   doc/PROJECT/MEDIUM/ATS-constraint/constraint_s2var.dats
#       modified:   doc/PROJECT/MEDIUM/ATS-constraint/parsing/parsing_s2var.dats
#
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#       modified:   doc/PROJECT/MEDIUM/ATS-constraint/constraint_s2Var.dats
#       modified:   doc/PROJECT/MEDIUM/ATS-constraint/parsing/parsing_s2Var.dats

A keen eye will note that these files have dopplegangers that are a single letter in case off. Somehow, and I have no idea what led me down this path to start with (as I was not working with these files myself from the upstream repo), I had switched these files. Try the many solutions listed on this page (and other pages) did not seem to help.

I was able to fix the problem by deleting my forked repository and all local repositories, and reforking. This alone was not enough; upstream had to rename the files in question to new filenames. As long as you don't have any uncommited work, no wikis, and no issues that diverge from the upstream repository, you should be just fine. Upstream may not be very happy with you, to say the least. As for my problem, it is undoubtedly a user error as I'm not that proficient with git, but the fact that it is far from easy to fix points to an issue with git as well.

Answer 25

When you want to transfer a stash to someone else:

# add files
git add .  
# diff all the changes to a file
git diff --staged > ~/mijn-fix.diff
# remove local changes 
git reset && git checkout .
# (later you can re-apply the diff:)
git apply ~/mijn-fix.diff

[edit] as commented, it ís possible to name stashes. Well, use this if you want to share your stash ;)

Answer 26

You could create your own alias which describes how to do it in a descriptive way.

I use the next alias to discard changes.

---

Discard changes in a (list of) file(s) in working tree

discard = checkout --

Then you can use it as next to discard all changes:

discard .

Or just a file:

discard filename

---

Otherwise, if you want to discard all changes and also the untracked files, I use a mix of checkout and clean:

Clean and discard changes and untracked files in working tree

cleanout = !git clean -df && git checkout -- .

So the use is simple as next:

cleanout

---

Now is available in the next Github repo which contains a lot of aliases:

• https://github.com/GitAlias/gitalias

Answer 27

If all the staged files were actually committed, then the branch can simply be reset e.g. from your GUI with about three mouse clicks: Branch, Reset, Yes!

So what I often do in practice to revert unwanted local changes is to commit all the good stuff, and then reset the branch.

If the good stuff is committed in a single commit, then you can use "amend last commit" to bring it back to being staged or unstaged if you'd ultimately like to commit it a little differently.

This might not be the technical solution you are looking for to your problem, but I find it a very practical solution. It allows you to discard unstaged changes selectively, resetting the changes you don't like and keeping the ones you do.

So in summary, I simply do commit, branch reset, and amend last commit.

Answer 28

If you are in case of submodule and no other solutions work try:

• To check what is the problem (maybe a "dirty" case) use:

  git diff

• To remove stash

  git submodule update

Answer 29

I had a weird situation where a file is always unstaged, this helps me to resolve.

git rm .gitattributes
git add -A
git reset --hard

Answer 30

If it's almost impossible to rule out modifications of the files, have you considered ignoring them? If this statement is right and you wouldn't touch those files during your development, this command may be useful:

git update-index --assume-unchanged file_to_ignore