How to remove local (untracked) files from the current Git working tree?

Question

How do you delete untracked local files from your current working tree?

Answer 1

As per the Git Documentation git clean

Remove untracked files from the working tree

---

Step 1 is to show what will be deleted by using the -n option:

# Print out the list of files which will be removed (dry run)
git clean -n

Clean Step - beware: this will delete files:

# Delete the files from the repository
git clean -f

• To remove directories, run git clean -f -d or git clean -fd
• To remove ignored files, run git clean -f -X or git clean -fX
• To remove ignored and non-ignored files, run git clean -f -x or git clean -fx

Note the case difference on the X for the two latter commands.

If clean.requireForce is set to "true" (the default) in your configuration, one needs to specify -f otherwise nothing will actually happen.

Again see the git-clean docs for more information.

---

Options

-f, --force

If the Git configuration variable clean.requireForce is not set to false, git clean will refuse to run unless given -f, -n or -i.

-x

Don’t use the standard ignore rules read from .gitignore (per directory) and $GIT_DIR/info/exclude, but do still use the ignore rules given with -e options. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with git reset) to create a pristine working directory to test a clean build.

-X

Remove only files ignored by Git. This may be useful to rebuild everything from scratch, but keep manually created files.

-n, -dry-run

Don’t actually remove anything, just show what would be done.

-d

Remove untracked directories in addition to untracked files. If an untracked directory is managed by a different Git repository, it is not removed by default. Use -f option twice if you really want to remove such a directory.

Answer 2

Use git clean -f -d to make sure that directories are also removed.

You can then check if your files are really gone with git status.

Answer 3

I am surprised nobody mentioned this before:

git clean -i

That stands for interactive and you will get a quick overview of what is going to be deleted offering you the possibility to include/exclude the affected files. Overall, still faster than running the mandatory --dry-run before the real cleaning.

You will have to toss in a -d if you also want to take care of empty folders. At the end, it makes for a nice alias:

git iclean

That being said, the extra hand holding of interactive commands can be tiring for experienced users. These days I just use the already mentioned git clean -fd

Answer 4

git-clean - Remove untracked files from the working tree

Answer 5

If untracked directory is a git repository of its own (e.g. submodule), you need to use -f twice:

git clean -d -f -f

Answer 6

Simple Way to remove untracked files

To remove all untracked files, The simple way is to add all of them first and reset the repo as below

git add --all
git reset --hard HEAD

---

Answer 7

I like git stash push -u because you can undo them all with git stash pop.

EDIT: Also I found a way to show untracked file in a stash (e.g. git show stash@{0}^3) https://stackoverflow.com/a/12681856/338986

EDIT2: git stash save is deprecated in favor of push. Thanks @script-wolf.

Answer 8

This is what I always use:

git clean -fdx

For a very large project you might want to run it a couple of times.

Answer 9

git-clean is what you are looking for. It is used to remove untracked files from the working tree.

Answer 10

If needed to remove untracked files from particular subdirectory,

git clean -f {dir_path}

And combined way to delete untracked dir/files and ignored files.

git clean -fxd {dir_path}

after this you will have modified files only in git status.

Answer 11

git clean -fd removes directory

git clean -fX removes ignored files

git clean -fx removes ignored and un-ignored files

can be used all above options in combination as

git clean -fdXx

check git manual for more help

Answer 12

Remove all extra folders and files in this repo + submodules

This gets you in same state as fresh clone.

git clean -ffdx

Remove all extra folders and files in this repo but not its submodules

git clean -fdx

Remove only extra folders but not files (ex. build folder)

git clean -fd

Remove extra folders + ignored files (but not any newly added files)

If file wasn't ignored and not yet checked-in then it stays. Note the capital X.

git clean -fdX

New interactive mode

git clean

Answer 13

OK, deleting unwanted untracked files and folders are easy using git in command line, just do it like this:

git clean -fd

Double check before doing it as it will delete the files and folders without making any history...

Also in this case, -f stands for force and -d stands for directory...

So, if you want to delete files only, you can use -f only:

git clean -f

If you want to delete(directories) and files, you can delete only untracked directories and files like this:

git clean -fd

Also, you can use -x flag for including the files which are ignored by git. This would be helpful if you want to delete everything.

And adding -i flag, makes git asking you for permission for deleting files one by one on the go.

If you not sure and want to check things first, add -n flag.

Use -q if you don't want to see any report after successful deletion.

I also create the image below to make it more memorisable, specially I have seen many people confuse -f for cleaning folder sometimes or mix it up somehow!

Answer 14

A better way is to use: git clean

git clean -d -x -f

This removes untracked files, including directories (-d) and files ignored by git (-x).

Also, replace the -f argument with -n to perform a dry-run or -i for interactive mode and it will tell you what will be removed.

Answer 15

User interactive approach:

git clean -i -fd

Remove .classpath [y/N]? N
Remove .gitignore [y/N]? N
Remove .project [y/N]? N
Remove .settings/ [y/N]? N
Remove src/com/arsdumpgenerator/inspector/ [y/N]? y
Remove src/com/arsdumpgenerator/manifest/ [y/N]? y
Remove src/com/arsdumpgenerator/s3/ [y/N]? y
Remove tst/com/arsdumpgenerator/manifest/ [y/N]? y
Remove tst/com/arsdumpgenerator/s3/ [y/N]? y

-i for interactive
-f for force
-d for directory
-x for ignored files(add if required)

Note: Add -n or --dry-run to just check what it will do.

Answer 16

git clean -f -d -x $(git rev-parse --show-cdup) applies clean to the root directory, no matter where you call it within a repository directory tree. I use it all the time as it does not force you to leave the folder where you working now and allows to clean & commit right from the place where you are.

Be sure that flags -f, -d, -x match your needs:

-d
       Remove untracked directories in addition to untracked files. If an
       untracked directory is managed by a different Git repository, it is
       not removed by default. Use -f option twice if you really want to
       remove such a directory.

-f, --force
       If the Git configuration variable clean.requireForce is not set to
       false, git clean will refuse to delete files or directories unless
       given -f, -n or -i. Git will refuse to delete directories with .git
       sub directory or file unless a second -f is given. This affects
       also git submodules where the storage area of the removed submodule
       under .git/modules/ is not removed until -f is given twice.

-x
       Don't use the standard ignore rules read from .gitignore (per
       directory) and $GIT_DIR/info/exclude, but do still use the ignore
       rules given with -e options. This allows removing all untracked
       files, including build products. This can be used (possibly in
       conjunction with git reset) to create a pristine working directory
       to test a clean build.

There are other flags as well available, just check git clean --help.

Answer 17

For me only following worked:

git clean -ffdx

In all other cases, I was getting message "Skipping Directory" for some subdirectories.

Answer 18

A lifehack for such situation I just invented and tried (that works perfectly):

git add .
git reset --hard HEAD

Beware! Be sure to commit any needed changes (even in non-untracked files) before performing this.

Answer 19

If you just want to delete the files listed as untracked by 'git status'

git stash save -u
git stash drop "stash@{0}"

I prefer this to 'git clean' because 'git clean' will delete files ignored by git, so your next build will have to rebuild everything and you may lose your IDE settings too.

Answer 20

To know what will be deleted before actually deleting:

git clean -d -n

It will output something like:

Would remove sample.txt

To delete everything listed in the output of the previous command:

git clean -d -f

It will output something like:

Removing sample.txt

Answer 21

To remove the untracked files you should first use command to view the files that will be affected by cleaning

git clean -fdn

This will show you the list of files that will be deleted. Now to actually delete those files use this command:

git clean -fd

Answer 22

Be careful while running `git clean` command.

Always use -n before running the actual command as it will show you what files would get removed.

git clean -n -d 
git clean -f -d

By default, git clean will only remove untracked files that are not ignored. Any file that matches a pattern in your .gitignore or other ignore files will not be removed. If you want to remove those files too, you can add a -x to the clean command.

git clean -f -d -x

There is also interactive mode available -i with the clean command

git clean -x -i

Alternatively

If you are not 100% sure that deleting your uncommitted work is safe, you could use stashing instead

git stash --all

It will also clear your directory but give you flexibility to retrieve the files at any point in time using stash with apply or pop. Then at later point you could clear your stash using:

git stash drop // or clean

Answer 23

Normal git clean command doesn't remove untracked files with my git version 2.9.0.windows.1.

$ git clean -fdx     # doesn't remove untracked files
$ git clean -fdx *   # Append star then it works!

Answer 24

git clean -f to remove untracked files from working directory.

I have covered some basics here in my blog, git-intro-basic-commands

Answer 25

uggested Command for Removing Untracked Files from git docs is git clean

git clean - Remove untracked files from the working tree

Suggested Method: Interative Mode by using git clean -i so we can have control over it. let see remaining available options.

Available Options:

git clean 
    -d -f -i -n -q -e -x -X (can use either)

Explanation:

1. -d

Remove untracked directories in addition to untracked files. If an untracked directory is managed by a different Git repository, it is not removed by default. Use -f option twice if you really want to remove such a directory.

2. -f, --force

If the Git configuration variable clean.requireForce is not set to false, git clean will refuse to run unless given -f, -n or -i.

3. -i, --interactive

Show what would be done and clean files interactively. See “Interactive mode” for details.

4. -n, --dry-run

Don’t actually remove anything, just show what would be done.

5. -q, --quiet

Be quiet, only report errors, but not the files that are successfully removed.

6. -e , --exclude=

In addition to those found in .gitignore (per directory) and $GIT_DIR/info/exclude, also consider these patterns to be in the set of the ignore rules in effect.

7. -x

Don’t use the standard ignore rules read from .gitignore (per directory) and $GIT_DIR/info/exclude, but do still use the ignore rules given with -e options. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with git reset) to create a pristine working directory to test a clean build.

8. -X

Remove only files ignored by Git. This may be useful to rebuild everything from scratch, but keep manually created files.

Answer 26

We can easily removed local untracked files from the current git working tree by using below git comments.

git reset [--soft | --mixed [-N] | --hard | --merge | --keep] [-q] [<commit>]

Example:

git reset --hard HEAD

Links :

1. https://git-scm.com/docs/git-reset
2. How do I use 'git reset --hard HEAD' to revert to a previous commit?
3. Reset local repository branch to be just like remote repository HEAD
4. https://jwiegley.github.io/git-from-the-bottom-up/3-Reset/4-doing-a-hard-reset.html

Answer 27

Clean out git repository and all submodules recursively

The following command will clean out the current git repository and all its submodules recursively:

(git clean -d -x -f && git submodule foreach --recursive git clean -d -x -f)

Answer 28

oh-my-zsh with zsh provides those great aliases via the git plugin. They can be used in bash as well.

gclean='git clean -fd'
gpristine='git reset --hard && git clean -dfx'

• gclean removes untracked directories in addition to untracked files.
• gpristine hard reset the local changes, remove untracked directories, untracked files and don't use the standard ignore rules read from .gitignore (per directory) and $GIT_DIR/info/exclude, but do still use the ignore rules given with -e options. This allows removing all untracked files, including build products. This can be used (possibly in conjunction with git reset) to create a pristine working directory to test a clean build.

Answer 29

git clean -f

will remove the untracked files from the current git

git clean -fd

when you want to remove directories and files, this will delete only untracked directories and files

Answer 30

Note: First navigate to the directory and checkout the branch you want to clean.

-i interactive mode and it will tell you what will be removed and you can choose an action from the list.

1. To clean files only [Folders will not be listed and will not be cleaned]: $ git clean -i

2. To clean files and folders: $ git clean -d -i

-d including directories.

---

If you choose c from the list. The files/folders will be deleted that are not tracked and will also remove files/folders that you mess-up.*

For instance: If you restructure the folder in your remote and pull the changes to your local computer. files/folders that are created by others initially will be in past folder and in the new one that you restructure.