Question

Due to using Gentoo, it often happens that after an update programs are linked against old versions of libraries. Normally, revdep-rebuild helps resolving that, but this time it's a dependency on a python library, and python-updater won't pick it up.

Is there a "hierarchical" variant of ldd which shows me what shared library depends on which another shared library? Most of the time libraries and executables are linked only against a handful of other shared libraries, which in turn were linked against a handful, turning the library dependency into a big list. I want to know which dependency I've got to rebuild with the new version of another library that I upgraded.

Was it helpful?

Solution

If you are running Portage≥2.2 with FEATURES=preserve-libs, you should rarely ever need revdep-rebuild anymore as old .so.vers will be preserved as needed (though you still need to rebuild carefully, as stuff still goes kaboom when libA.so.0 wants libC.so.0 and libB.so.0 wants libC.so.1 and some binary wants both libA.so.0 and libB.so.0).

That being said, what ldd does is to get the dynamic linker to do load the executable or library as it usually would, but print out some info along the way. This is a recursive "binary needs library needs other library&hellip" search, because that's what the dynamic linker does.

I'm currently running Linux/ppc32; on Linux/x86, the dynamic linker is usually /lib/ld-linux.so.2, and on Linux/x86_64, the dynamic linker is usually /lib/ld-linux-x86-64.so.2. Here, I call it directly just to hammer in the point that all ldd is nothing more than a shell script that calls upon the dynamic linker to perform its magic.

$ /lib/ld.so.1 /sbin/badblocks
Usage: /sbin/badblocks [-b block_size] [-i input_file] [-o output_file] [-svwnf]
       [-c blocks_at_once] [-d delay_factor_between_reads] [-e max_bad_blocks]
       [-p num_passes] [-t test_pattern [-t test_pattern [...]]]
       device [last_block [first_block]]
$ LD_TRACE_LOADED_OBJECTS=1 /lib/ld.so.1 /sbin/badblocks
        linux-vdso32.so.1 =>  (0x00100000)
        libext2fs.so.2 => /lib/libext2fs.so.2 (0x0ffa8000)
        libcom_err.so.2 => /lib/libcom_err.so.2 (0x0ff84000)
        libc.so.6 => /lib/libc.so.6 (0x0fdfa000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0fdc0000)
        /lib/ld.so.1 (0x48000000)
$ LD_TRACE_LOADED_OBJECTS=1 /lib/ld.so.1 /lib/libcom_err.so.2
        linux-vdso32.so.1 =>  (0x00100000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x6ffa2000)
        libc.so.6 => /lib/libc.so.6 (0x6fe18000)
        /lib/ld.so.1 (0x203ba000)
$ grep -l pthread /sbin/badblocks /lib/libcom_err.so.2
/lib/libcom_err.so.2

/sbin/badblocks doesn't list libpthread.so.0 as a library dependency, but it gets pulled in by libcom_err.so.2.

Is your problem that ldd doesn't output a nice-looking dependency tree? Use ldd -v.

$ LD_TRACE_LOADED_OBJECTS=1 LD_VERBOSE=1 /lib/ld.so.1 /sbin/badblocks
        linux-vdso32.so.1 =>  (0x00100000)
        libext2fs.so.2 => /lib/libext2fs.so.2 (0x0ffa8000)
        libcom_err.so.2 => /lib/libcom_err.so.2 (0x0ff84000)
        libc.so.6 => /lib/libc.so.6 (0x0fdfa000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0fdc0000)
        /lib/ld.so.1 (0x201f9000)

        Version information:
        /sbin/badblocks:
                libc.so.6 (GLIBC_2.2) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.4) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.1) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.0) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.3.4) => /lib/libc.so.6
        /lib/libext2fs.so.2:
                libc.so.6 (GLIBC_2.1.3) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.4) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.3) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.2) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.1) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.0) => /lib/libc.so.6
        /lib/libcom_err.so.2:
                ld.so.1 (GLIBC_2.3) => /lib/ld.so.1
                libpthread.so.0 (GLIBC_2.1) => /lib/libpthread.so.0
                libpthread.so.0 (GLIBC_2.0) => /lib/libpthread.so.0
                libc.so.6 (GLIBC_2.1.3) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.4) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.1) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.0) => /lib/libc.so.6
        /lib/libc.so.6:
                ld.so.1 (GLIBC_PRIVATE) => /lib/ld.so.1
                ld.so.1 (GLIBC_2.3) => /lib/ld.so.1
        /lib/libpthread.so.0:
                ld.so.1 (GLIBC_2.3) => /lib/ld.so.1
                ld.so.1 (GLIBC_2.1) => /lib/ld.so.1
                ld.so.1 (GLIBC_PRIVATE) => /lib/ld.so.1
                libc.so.6 (GLIBC_2.1.3) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.3.4) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.4) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.1) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.3.2) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.2) => /lib/libc.so.6
                libc.so.6 (GLIBC_PRIVATE) => /lib/libc.so.6
                libc.so.6 (GLIBC_2.0) => /lib/libc.so.6

If you want, you can read the ELF headers directly instead of depending on the dynamic linker.

$ readelf -d /sbin/badblocks | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libext2fs.so.2]
 0x00000001 (NEEDED)                     Shared library: [libcom_err.so.2]
 0x00000001 (NEEDED)                     Shared library: [libc.so.6]
$ readelf -d /lib/libcom_err.so.2 | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libpthread.so.0]
 0x00000001 (NEEDED)                     Shared library: [libc.so.6]
 0x00000001 (NEEDED)                     Shared library: [ld.so.1]

You can also man ld.so for other cute tricks you can play with glibc's dynamic linker.

OTHER TIPS

I see many interesting details but no direct answer to the question asked.

The 'hierarchical' version of ldd is lddtree (from app-misc/pax-utils):

$ lddtree /usr/bin/xmllint 
xmllint => /usr/bin/xmllint (interpreter => /lib64/ld-linux-x86-64.so.2)
    libreadline.so.6 => /lib64/libreadline.so.6
        libncurses.so.5 => /lib64/libncurses.so.5
            libdl.so.2 => /lib64/libdl.so.2
    libxml2.so.2 => /usr/lib64/libxml2.so.2
        libicui18n.so.49 => /usr/lib64/libicui18n.so.49
            libstdc++.so.6 => /usr/lib/gcc/x86_64-pc-linux-gnu/4.7.1/32/libstdc++.so.6
                ld-linux.so.2 => /lib64/ld-linux.so.2
            libgcc_s.so.1 => /usr/lib/gcc/x86_64-pc-linux-gnu/4.7.1/32/libgcc_s.so.1
        libicuuc.so.49 => /usr/lib64/libicuuc.so.49
        libicudata.so.49 => /usr/lib64/libicudata.so.49
        libz.so.1 => /lib64/libz.so.1
        liblzma.so.5 => /usr/lib64/liblzma.so.5
        libm.so.6 => /lib64/libm.so.6
    libpthread.so.0 => /lib64/libpthread.so.0
    libc.so.6 => /lib64/libc.so.6

I needed something like this, so I wrote tldd, here it is showing its own library dependencies:

$ ./tldd ./tldd
./tldd
└─libstdc++.so.6 => /lib64/libstdc++.so.6 (0x0000003687c00000)
  ├─libm.so.6 => /lib64/libm.so.6 (0x0000003685000000)
  │ └─libc.so.6 => /lib64/libc.so.6 (0x0000003684c00000)
  │   └─ld-linux-x86-64.so.2 => /lib64/ld-linux-x86-64.so.2 (0x0000003684400000)
  └─libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x0000003686c00000)

I was also going to suggest "readelf -d" but also ensure you build with LDFLAGS="-Wl,--as-needed" if you don't already. This will make you hit this problem less often. Portage 2.2's preserve-libs is nice but I gather it was masked primarily because of it - it does have flaws.

Licensed under: CC-BY-SA with attribution
Not affiliated with StackOverflow
scroll top