What is a good way to test a file to see if its a zip file?

StackOverflow https://stackoverflow.com/questions/1887041

Question

I am looking as a new file format specification and the specification says the file can be either xml based or a zip file containing an xml file and other files.

The file extension is the same in both cases. What ways could I test the file to decide if it needs decompressing or just reading?

Was it helpful?

Solution

The zip file format is defined by PKWARE. You can find their file specification here.

Near the top you will find the header specification:

A. Local file header:

    local file header signature     4 bytes  (0x04034b50)
    version needed to extract       2 bytes
    general purpose bit flag        2 bytes
    compression method              2 bytes
    last mod file time              2 bytes
    last mod file date              2 bytes
    crc-32                          4 bytes
    compressed size                 4 bytes
    uncompressed size               4 bytes
    file name length                2 bytes
    extra field length              2 bytes

    file name (variable size)
    extra field (variable size)

From this you can see that the first 4 bytes of the header should be the file signature which should be the hex value 0x04034b50. Byte order in the file is the other way round - PKWARE specify that "All values are stored in little-endian byte order unless otherwise specified.", so if you use a hex editor to view the file you will see 50 4b 03 04 as the first 4 bytes.

You can use this to check if your file is a zip file. If you open the file in notepad, you will notice that the first two bytes (50 and 4b) are the ASCII characters PK.

OTHER TIPS

You could look at the magic number of the file. The ones for ZIP archives are listed on the ZIP format wikipedia page: PK\003\004 or PK\005\006.

Check the first few bytes of the file for the magic number. Zip files begin with PK (50 4B). As XML files cannot start with these characters and still be valid, you can be fairly sure as to the file type.

You can use file to see if it's a text file(xml) or an executable(zip). Scroll down to see an example.

Not a good solution though, but just thinking out load... how about:

try
{
LoadXmlFile(theFile);//Exception if not an xml file
}
catch(Exception ex)
{
LoadZipFile(theFile)
}

You could check the file to see if it contains a valid XML header. If it doesn't, try decompressing it.

See Click here for XML specification.

File magic numbers

To clarify, it starts with 50 4b 03 04.

See http://www.pkware.com/documents/casestudies/APPNOTE.TXT (From Simon P Stevens)

You could try unzipping it - an XML file is exceedingly unlikely to be a valid zip file, or could check the magic numbers, as others have said.

it depends on what you are using but the zip library might have a function that test wether a file or not is a zip file something like is_zip, test_file_zip or whatever ...

or create you're own function by using the magic number given above.

Licensed under: CC-BY-SA with attribution
Not affiliated with StackOverflow
scroll top