Where can I set environment variables that crontab will use?
https://stackoverflow.com/questions/2229825
-
19-09-2019 - |
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianQuestion
I have a crontab running every hour. The user running it has environment variabless in the .bash_profile that work when the user runs the job from the terminal, however, obviously these don't get picked up by crontab when it runs.
I've tried setting them in .profile and .bashrc but they still don't seem to get picked up. Does anyone know where I can put environment vars that crontab can pick up?
Solution
Have 'cron' run a shell script that sets the environment before running the command.
Always.
# @(#)$Id: crontab,v 4.2 2007/09/17 02:41:00 jleffler Exp $
# Crontab file for Home Directory for Jonathan Leffler (JL)
#-----------------------------------------------------------------------------
#Min Hour Day Month Weekday Command
#-----------------------------------------------------------------------------
0 * * * * /usr/bin/ksh /work1/jleffler/bin/Cron/hourly
1 1 * * * /usr/bin/ksh /work1/jleffler/bin/Cron/daily
23 1 * * 1-5 /usr/bin/ksh /work1/jleffler/bin/Cron/weekday
2 3 * * 0 /usr/bin/ksh /work1/jleffler/bin/Cron/weekly
21 3 1 * * /usr/bin/ksh /work1/jleffler/bin/Cron/monthly
The scripts in ~/bin/Cron are all links to a single script, 'runcron', which looks like:
: "$Id: runcron.sh,v 2.1 2001/02/27 00:53:22 jleffler Exp $"
#
# Commands to be performed by Cron (no debugging options)
# Set environment -- not done by cron (usually switches HOME)
. $HOME/.cronfile
base=`basename $0`
cmd=${REAL_HOME:-/real/home}/bin/$base
if [ ! -x $cmd ]
then cmd=${HOME}/bin/$base
fi
exec $cmd ${@:+"$@"}
(Written using an older coding standard - nowadays, I'd use a shebang '#!' at the start.)
The '~/.cronfile' is a variation on my profile for use by cron - rigorously non-interactive and no echoing for the sake of being noisy. You could arrange to execute the .profile and so on instead. (The REAL_HOME stuff is an artefact of my environment - you can pretend it is the same as $HOME.)
So, this code reads the appropriate environment and then executes the non-Cron version of the command from my home directory. So, for example, my 'weekday' command looks like:
: "@(#)$Id: weekday.sh,v 1.10 2007/09/17 02:42:03 jleffler Exp $"
#
# Commands to be done each weekday
# Update ICSCOPE
n.updics
The 'daily' command is simpler:
: "@(#)$Id: daily.sh,v 1.5 1997/06/02 22:04:21 johnl Exp $"
#
# Commands to be done daily
# Nothing -- most things are done on weekdays only
exit 0
OTHER TIPS
You can define environment variables in the crontab itself when running crontab -e from the command line.
LANG=nb_NO.UTF-8
LC_ALL=nb_NO.UTF-8
# m h dom mon dow command
* * * * * sleep 5s && echo "yo"
This feature is only available to certain implementations of cron. Ubuntu and Debian currently use vixie-cron which allows these to be declared in the crontab file (also GNU mcron).
Archlinux and RedHat use cronie which does not allow environment variables to be declared and will throw syntax errors in the cron.log. Workaround can be done per-entry:
# m h dom mon dow command
* * * * * export LC_ALL=nb_NO.UTF-8; sleep 5s && echo "yo"
I got one more solution for this problem:
0 5 * * * . $HOME/.profile; /path/to/command/to/run
In this case it will pick all the environment variable defined in your $HOME/.profile file.
Of course $HOME is also not set, you have to replace it with the full path of your $HOME.
Setting vars in /etc/environment also worked for me in Ubuntu. As of 12.04, variables in /etc/environment are loaded for cron.
Expanding on @carestad example, which I find easier, is to run the script with cron and have the environment in the script.
In crontab -e file:
SHELL=/bin/bash
*/1 * * * * $HOME/cron_job.sh
In cron_job.sh file:
#!/bin/bash
source $HOME/.bash_profile
some_other_cmd
Any command after the source of .bash_profile will have your environment as if you logged in.
If you start the scripts you are executing through cron with:
#!/bin/bash -l
They should pick up your ~/.bash_profile environment variables
For me I had to set the environment variable for a php application. I resloved it by adding the following code to my crontab.
$ sudo crontab -e
crontab:
ENVIRONMENT_VAR=production
* * * * * /home/deploy/my_app/cron/cron.doSomethingWonderful.php
and inside doSomethingWonderful.php I could get the environment value with:
<?php
echo $_SERVER['ENVIRONMENT_VAR']; # => "production"
I hope this helps!
Whatever you set in crontab will be available in the cronjobs, both directly and using the variables in the scripts.
Use them in the definition of the cronjob
You can configure crontab so that it sets variables that then the can cronjob use:
$ crontab -l
myvar="hi man"
* * * * * echo "$myvar. date is $(date)" >> /tmp/hello
Now the file /tmp/hello shows things like:
$ cat /tmp/hello
hi man. date is Thu May 12 12:10:01 CEST 2016
hi man. date is Thu May 12 12:11:01 CEST 2016
Use them in the script run by cronjob
You can configure crontab so that it sets variables that then the scripts can use:
$ crontab -l
myvar="hi man"
* * * * * /bin/bash /tmp/myscript.sh
And say script /tmp/myscript.sh is like this:
echo "Now is $(date). myvar=$myvar" >> /tmp/myoutput.res
It generates a file /tmp/myoutput.res showing:
$ cat /tmp/myoutput.res
Now is Thu May 12 12:07:01 CEST 2016. myvar=hi man
Now is Thu May 12 12:08:01 CEST 2016. myvar=hi man
...
Instead of
0 * * * * sh /my/script.sh
Use bash -l -c
0 * * * * bash -l -c 'sh /my/script.sh'
Expanding on @Robert Brisita has just expand , also if you don't want to set up all the variables of the profile in the script, you can select the variables to export on the top of the script
In crontab -e file:
SHELL=/bin/bash
*/1 * * * * /Path/to/script/script.sh
In script.sh
#!/bin/bash
export JAVA_HOME=/path/to/jdk
some-other-command
Another way - inspired by this this answer - to "inject" variables is the following (fcron example):
%daily 00 12 \
set -a; \
. /path/to/file/containing/vars; \
set +a; \
/path/to/script/using/vars
From help set:
-a Mark variables which are modified or created for export.
Using + rather than - causes these flags to be turned off.
So everything in between set - and set + gets exported to env and is then available for other scripts, etc. Without using set the variables get sourced but live in set only.
Aside from that it's also useful to pass variables when a program requires a non-root account to run but you'd need some variables inside that other user's environment. Below is an example passing in nullmailer vars to format the e-mail header:
su -s /bin/bash -c "set -a; \
. /path/to/nullmailer-vars; \
set +a; \
/usr/sbin/logcheck" logcheck
I tried most of the provided solutions, but nothing worked at first. It turns out, though, that it wasn't the solutions that failed to work. Apparently, my ~/.bashrc file starts with the following block of code:
case $- in
*i*) ;;
*) return;;
esac
This basically is a case statement that checks the current set of options in the current shell to determine that the shell is running interactively.
If the shell happens to be running interactively, then it moves on to sourcing the ~/.bashrc file.
However, in a shell invoked by cron, the $- variable doesn't contain the i value which indicates interactivity.
Therefore, the ~/.bashrc file never gets sourced fully. As a result, the environment variables never got set.
If this happens to be your issue, feel free to comment out the block of code as follows and try again:
# case $- in
# *i*) ;;
# *) return;;
# esac
I hope this turns out useful
I'm using Oh-my-zsh in my macbook so I've tried many things to get the crontab task runs but finally, my solution was prepending the .zshrc before the command to run.
*/30 * * * * . $HOME/.zshrc; node /path/for/my_script.js
This task runs every 30 minutes and uses .zshrc profile to execute my node command.
Don't forget to use the dot before the $HOME var.
