Magic Trackpad randomly disconnects over bluetooth from MacBook Pro 2018
https://apple.stackexchange.com/questions/352020
-
29-04-2021 - |
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianQuestion
I know there's already this question with many suggestions but it's marked as resolved and not about MBP.
I have a setup with Magic Keyboard and Trackpad 2 connected over Bluetooth to MBP. Also an external display Dell U2715H. I've been working for a few months with MBP 2012 and it worked flawlessly, the monitor was connected via DP to mDP cable. Then my 2012 MBP died on me and I replaced it with 2018 MBP. I connected the display via Satechi USB-C hub with mDP slot.
And with this new setup, my Trackpad started to suddenly drop Bluetooth connections from time to time. It randomly disconnects-connects for 4-5 times over a few seconds. So, it's obviously not a Trackpad or some Wi-Fi router interferences issue because it worked just fine with the old MBP. I tried a few things that did not help:
- Uninstall LittleSnitch (I've read somewhere that it might interfere)
- Connected USB-C hub to the right side (tried different slots)
- Reset Bluetooth module
- Disabled handoff
- Connect/disconnect Bluetooth devices
- Charged devices to 100%
Apple support wasn't helpful either.
At first, disconnects happened only with Trackpad but not Magic Keyboard which I thought is super weird but later the keyboard started to disconnect as well.
I read a few reports by people claiming that's the issue in the USB-C hub interfering with Bluetooth signal, so I tested a day without the USB hub and connections weren't dropped, so I decided that's the issue and bought myself a DP to USB-c cable to replace the hub for the display connection. But to my surprise, it did not help.
I installed Bluetooth PacketLogger and got these error logs during the disconnects:
12:54:25.383 L2CAP Receive 0x000C Trackpad Connection Request - HID Control
Identifier: 0x02
Size: 4 (0x0004)
PSM: 0x0011 - HID Control
Source CID: 0x0048
Channel ID: 0x0001 Length: 0x0008 (08) [ 02 02 04 00 11 00 48 00 ]
L2CAP Payload:
00000000: 0202 0400 1100 4800 ......H.
12:54:25.383 ACL Receive 0x000C Trackpad Data [Handle: 0x000C, Packet Boundary Flags: 0x2, Length: 0x000C (12)]
Packet Boundary Flags: [10] 0x02 - First packet of Higher Layer Message (i.e. start of an L2CAP packet)
Broadcast Flags: [00] 0x00 - Point-to-point
Data (0x000C bytes)
12:54:25.383 ACL Receive 0x0000
00000000: 0C20 0C00 0800 0100 0202 0400 1100 4800 . ............H.
########################################################
12:54:25.383 L2CAP Send 0x000C Trackpad Connection Response - HID Control - Connection Pending
Identifier: 0x02
Size: 8 (0x0008)
Destination CID: 0x0040
Source CID: 0x0048
Result: 0x0001 (Connection Pending)
Status: 0x0000 (No further information available)
Channel ID: 0x0001 Length: 0x000C (12) [ 03 02 08 00 40 00 48 00 01 00 00 00 ]
L2CAP Payload:
00000000: 0302 0800 4000 4800 0100 0000 ....@.H.....
12:54:25.383 ACL Send 0x000C Trackpad Data [Handle: 0x000C, Packet Boundary Flags: 0x2, Length: 0x0010 (16)]
Packet Boundary Flags: [10] 0x02 - First packet of Higher Layer Message (i.e. start of an L2CAP packet)
Broadcast Flags: [00] 0x00 - Point-to-point
Data (0x0010 bytes)
12:54:25.383 ACL Send 0x0000 00000000: 0C20 1000 0C00 0100 0302 0800 4000 4800 . ..........@.H.
00000000: 0C20 1000 0C00 0100 0302 0800 4000 4800 . ..........@.H.
00000010: 0100 0000 ....
########################################################
12:54:25.383 L2CAP Send 0x000C Trackpad Connection Response - HID Control - Connection Successful
Identifier: 0x02
Size: 8 (0x0008)
Destination CID: 0x0040
Source CID: 0x0048
Result: 0x0000 (Connection Successful)
Status: 0x0000 (No further information available)
Channel ID: 0x0001 Length: 0x000C (12) [ 03 02 08 00 40 00 48 00 00 00 00 00 ]
L2CAP Payload:
00000000: 0302 0800 4000 4800 0000 0000 ....@.H.....
12:54:25.383 ACL Send 0x000C Trackpad Data [Handle: 0x000C, Packet Boundary Flags: 0x2, Length: 0x0010 (16)]
Packet Boundary Flags: [10] 0x02 - First packet of Higher Layer Message (i.e. start of an L2CAP packet)
Broadcast Flags: [00] 0x00 - Point-to-point
Data (0x0010 bytes)
12:54:25.383 ACL Send 0x0000 00000000: 0C20 1000 0C00 0100 0302 0800 4000 4800 . ..........@.H.
00000000: 0C20 1000 0C00 0100 0302 0800 4000 4800 . ..........@.H.
00000010: 0000 0000 ....
########################################################
12:54:25.383 L2CAP Send 0x000C Trackpad Configuration Request - HID Control
Identifier: 0x03
Size: 8 (0x0008)
Destination CID: 0x0048
Flags: 0x0000 - Not Continuation
Options:
MTU (Hint) - Length: 0x02
MTU: 0xFFFF
Channel ID: 0x0001 Length: 0x000C (12) [ 04 03 08 00 48 00 00 00 01 02 FF FF ]
L2CAP Payload:
00000000: 0403 0800 4800 0000 0102 FFFF ....H.......
12:54:25.383 ACL Send 0x000C Trackpad Data [Handle: 0x000C, Packet Boundary Flags: 0x2, Length: 0x0010 (16)]
Packet Boundary Flags: [10] 0x02 - First packet of Higher Layer Message (i.e. start of an L2CAP packet)
Broadcast Flags: [00] 0x00 - Point-to-point
Data (0x0010 bytes)
12:54:25.383 ACL Send 0x0000 00000000: 0C20 1000 0C00 0100 0403 0800 4800 0000 . ..........H...
00000000: 0C20 1000 0C00 0100 0403 0800 4800 0000 . ..........H...
00000010: 0102 FFFF ....
########################################################
12:54:25.394 L2CAP Receive 0x000C Trackpad Connection Request - HID Interrupt
Identifier: 0x04
Size: 4 (0x0004)
PSM: 0x0013 - HID Interrupt
Source CID: 0x0049
Channel ID: 0x0001 Length: 0x0008 (08) [ 02 04 04 00 13 00 49 00 ]
L2CAP Payload:
00000000: 0204 0400 1300 4900 ......I.
12:54:25.394 ACL Receive 0x000C Trackpad Data [Handle: 0x000C, Packet Boundary Flags: 0x2, Length: 0x000C (12)]
Packet Boundary Flags: [10] 0x02 - First packet of Higher Layer Message (i.e. start of an L2CAP packet)
Broadcast Flags: [00] 0x00 - Point-to-point
Data (0x000C bytes)
12:54:25.394 ACL Receive 0x0000 00000000: 0C20 0C00 0800 0100 0204 0400 1300 4900 . ............I.
00000000: 0C20 0C00 0800 0100 0204 0400 1300 4900 . ............I.
I think the only helpful message out of all this is First packet of Higher Layer Message (i.e. start of an L2CAP packet). Sounds like there's an interference with Bluetooth after all.
At this point, I'm inclined to think that the MBP 2018 just has a bad Bluetooth module (or poor design that causes signal interferences) and to resolve it for good you'll need to buy an external Bluetooth adapter.
Solution
I have this issue again and it seems the main reason is the interference between Bluetooth and WiFi frequencies. Updating to 5Ghz WiFi fixed the issue for me before in the old office but replacing a perfectly fine router with the new that supports 5Ghz is not really a solution.
Some people claim it to be a driver issue since Yosemite but I don't think so because my MBP 2012 worked flawlessly until it died in late 2018 and I had these issues with MBP 2018 since I bought it. So, my take is that it's a hardware issue caused by a bad design.
UPDATE: I've once again confirmed that switching to 5Ghz WiFi network fixes the issue. It doesn't matter whether you have both 2.4Ghz and 5Ghz enabled in your router as long as MBP connected to 5Ghz. I can't express enough how disappointing this is to have this issue in a so expensive laptop in its 3rd generation.
OTHER TIPS
My endless research on this problem makes me think there's a hardware design issue in these 2018 MBPs. Or at least a firmware bug.
Some people report switching from the left to the right USB-c ports fix it, others resort to a new Bluetooth adapter/dongle. Still others say moving items on their table/desktop (physical) was the solution. I also read from someone that fixed it by turning off wi-fi and using a wired network connection.
In my case was avoiding weak wi-fi networks.
All in all, look for radio frequency activity in your environment. The solution is probably in the physical world, not in the software.
Unless Apple comes out, admits a defect, and provides an official fix this problem doesn't have a universal solution. It will require some tweaking and flipping things around you. At least that is my impression.
I had this problem too, but I discovered that it only happens if I have my MacBook Pro on a vertical stand behind my external display.
I now think that the external display is partially shielding the Bluetooth signal between my MacBook Pro and my Magic Trackpad 2. When I moved the MacBook Pro to the left of the external display, the problem went away.
Placing the trackpad to the left of my MBP works well, while to the right it loses connection all the time.
I have observed and can reliably reproduce this significant difference.
It is an old trackpad (A1339) and a new-ish MBP (2018, 15in w/ touch bar) on an elevated stand (3 inches off the desk).
I'm late to answer this -- but I was experiencing the same exact issue today and wanted to provide an update in the event it can help someone else.
My issues:
When Magic trackpad 2 was connected via Bluetooth, it kept disconnecting, connecting briefly, and then disconnecting.
When Magic keyboard with Numeric Pad was connected via Bluetooth, it kept disconnecting, connecting briefly, and then disconnecting.
My Setup:
- MacBook Pro (15-inch, Mid 2012) connected via WiFi to my home network
- macOS Catalina - Version 10.15.7
What resolved my issues:
Switching OFF WiFi on my macbook pro.
Connecting to the internet via ethernet.
I do not understand exactly why I keep experiencing this same issue with Bluetooth connected devices while my macbook pro is connected to WiFi -- but this is the solution that has worked for me. Hope this helps.
