How do I get the path of the assembly the code is in?

Question

Is there a way to get the path for the assembly in which the current code resides? I do not want the path of the calling assembly, just the one containing the code.

Basically my unit test needs to read some xml test files which are located relative to the dll. I want the path to always resolve correctly regardless of whether the testing dll is run from TestDriven.NET, the MbUnit GUI or something else.

Edit: People seem to be misunderstanding what I'm asking.

My test library is located in say

C:\projects\myapplication\daotests\bin\Debug\daotests.dll

and I would like to get this path:

C:\projects\myapplication\daotests\bin\Debug\

The three suggestions so far fail me when I run from the MbUnit Gui:

• Environment.CurrentDirectory gives c:\Program Files\MbUnit

• System.Reflection.Assembly.GetAssembly(typeof(DaoTests)).Location gives C:\Documents and Settings\george\Local Settings\Temp\ ....\DaoTests.dll

• System.Reflection.Assembly.GetExecutingAssembly().Location gives the same as the previous.

Answer 1

I've defined the following property as we use this often in unit testing.

public static string AssemblyDirectory
{
    get
    {
        string codeBase = Assembly.GetExecutingAssembly().CodeBase;
        UriBuilder uri = new UriBuilder(codeBase);
        string path = Uri.UnescapeDataString(uri.Path);
        return Path.GetDirectoryName(path);
    }
}

The Assembly.Location property sometimes gives you some funny results when using NUnit (where assemblies run from a temporary folder), so I prefer to use CodeBase which gives you the path in URI format, then UriBuild.UnescapeDataString removes the File:// at the beginning, and GetDirectoryName changes it to the normal windows format.

Answer 2

Does this help?

//get the full location of the assembly with DaoTests in it
string fullPath = System.Reflection.Assembly.GetAssembly(typeof(DaoTests)).Location;

//get the folder that's in
string theDirectory = Path.GetDirectoryName( fullPath );

Answer 3

It's as simple as this:

var dir = AppDomain.CurrentDomain.BaseDirectory;

Answer 4

Same as John's answer, but a slightly less verbose extension method.

public static string GetDirectoryPath(this Assembly assembly)
{
    string filePath = new Uri(assembly.CodeBase).LocalPath;
    return Path.GetDirectoryName(filePath);            
}

Now you can do:

var localDir = Assembly.GetExecutingAssembly().GetDirectoryPath();

or if you prefer:

var localDir = typeof(DaoTests).Assembly.GetDirectoryPath();

Answer 5

The only solution that worked for me when using CodeBase and UNC Network shares was:

System.IO.Path.GetDirectoryName(new System.Uri(System.Reflection.Assembly.GetExecutingAssembly().CodeBase).LocalPath);

It also works with normal URIs too.

Answer 6

This should work, unless the assembly is shadow copied:

string path = System.Reflection.Assembly.GetExecutingAssembly().Location

Answer 7

I believe this would work for any kind of application:

AppDomain.CurrentDomain.RelativeSearchPath ?? AppDomain.CurrentDomain.BaseDirectory

Answer 8

What about this:

System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);

Answer 9

AppDomain.CurrentDomain.BaseDirectory

works with MbUnit GUI.

Answer 10

I suspect that the real issue here is that your test runner is copying your assembly to a different location. There's no way at runtime to tell where the assembly was copied from, but you can probably flip a switch to tell the test runner to run the assembly from where it is and not to copy it to a shadow directory.

Such a switch is likely to be different for each test runner, of course.

Have you considered embedding your XML data as resources inside your test assembly?

Answer 11

How about this ...

string ThisdllDirectory = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);

Then just hack off what you do not need

Answer 12

As far as I can tell, most of the other answers have a few problems.

The correct way to do this for a disk-based (as opposed to web-based), non-GACed assembly is to use the currently executing assembly's CodeBase property.

This returns a URL (file://). Instead of messing around with string manipulation or UnescapeDataString, this can be converted with minimal fuss by leveraging the LocalPath property of Uri.

var codeBaseUrl = Assembly.GetExecutingAssembly().CodeBase;
var filePathToCodeBase = new Uri(codeBaseUrl).LocalPath;
var directoryPath = Path.GetDirectoryName(filePathToCodeBase);

Answer 13

var assembly = System.Reflection.Assembly.GetExecutingAssembly();
var assemblyPath = assembly.GetFiles()[0].Name;
var assemblyDir = System.IO.Path.GetDirectoryName(assemblyPath);

Answer 14

Here is a VB.NET port of John Sibly's code. Visual Basic is not case sensitive, so a couple of his variable names were colliding with type names.

Public Shared ReadOnly Property AssemblyDirectory() As String
    Get
        Dim codeBase As String = Assembly.GetExecutingAssembly().CodeBase
        Dim uriBuilder As New UriBuilder(codeBase)
        Dim assemblyPath As String = Uri.UnescapeDataString(uriBuilder.Path)
        Return Path.GetDirectoryName(assemblyPath)
    End Get
End Property

Answer 15

In all these years, nobody has actually mentioned this one. A trick I learned from the awesome ApprovalTests project. The trick is that you use the debugging information in the assembly to find the original directory.

This will not work in RELEASE mode, nor with optimizations enabled, nor on a machine different from the one it was compiled on.

But this will get you paths that are relative to the location of the source code file you call it from

public static class PathUtilities
{
    public static string GetAdjacentFile(string relativePath)
    {
        return GetDirectoryForCaller(1) + relativePath;
    }
    public static string GetDirectoryForCaller()
    {
        return GetDirectoryForCaller(1);
    }


    public static string GetDirectoryForCaller(int callerStackDepth)
    {
        var stackFrame = new StackTrace(true).GetFrame(callerStackDepth + 1);
        return GetDirectoryForStackFrame(stackFrame);
    }

    public static string GetDirectoryForStackFrame(StackFrame stackFrame)
    {
        return new FileInfo(stackFrame.GetFileName()).Directory.FullName + Path.DirectorySeparatorChar;
    }
}

Answer 16

The current directory where you exist.

Environment.CurrentDirectory;  // This is the current directory of your application

If you copy the .xml file out with build you should find it.

or

System.Reflection.Assembly assembly = System.Reflection.Assembly.GetAssembly(typeof(SomeObject));

// The location of the Assembly
assembly.Location;

Answer 17

I've been using Assembly.CodeBase instead of Location:

Assembly a;
a = Assembly.GetAssembly(typeof(DaoTests));
string s = a.CodeBase.ToUpper(); // file:///c:/path/name.dll
Assert.AreEqual(true, s.StartsWith("FILE://"), "CodeBase is " + s);
s = s.Substring(7, s.LastIndexOf('/') - 7); // 7 = "file://"
while (s.StartsWith("/")) {
    s = s.Substring(1, s.Length - 1);
}
s = s.Replace("/", "\\");

It's been working, but I'm no longer sure it is 100% correct. The page at http://blogs.msdn.com/suzcook/archive/2003/06/26/assembly-codebase-vs-assembly-location.aspx says:

"The CodeBase is a URL to the place where the file was found, while the Location is the path where it was actually loaded. For example, if the assembly was downloaded from the internet, its CodeBase may start with "http://", but its Location may start with "C:\". If the file was shadow-copied, the Location would be the path to the copy of the file in the shadow copy dir. It’s also good to know that the CodeBase is not guaranteed to be set for assemblies in the GAC. Location will always be set for assemblies loaded from disk, however."

You may want to use CodeBase instead of Location.

Answer 18

Starting with .net framework 4.6 / .net core 1.0, there is now a AppContext.BaseDirectory, which should give the same result as AppDomain.CurrentDomain.BaseDirectory, except that AppDomains were not part of the .net core 1.x /.net standard 1.x API.

AppContext.BaseDirectory

Answer 19

You can get the bin path by AppDomain.CurrentDomain.RelativeSearchPath

Answer 20

All of the proposed answers work when the developer can change the code to include the required snippet, but if you wanted to do this without changing any code you could use Process Explorer.

It will list all executing dlls on the system, you may need to determine the process id of your running application, but that is usually not too difficult.

I've written a full description of how do this for a dll inside II - http://nodogmablog.bryanhogan.net/2016/09/locating-and-checking-an-executing-dll-on-a-running-web-server/

Answer 21

in a windows form app, you can simply use Application.StartupPath

but for DLLs and console apps the code is much harder to remember...

string slash = Path.DirectorySeparatorChar.ToString();
string root = Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);

root += slash;
string settingsIni = root + "settings.ini"

Answer 22

string path = Path.GetDirectoryName(typeof(DaoTests).Module.FullyQualifiedName);

Answer 23

You will get incorrect directory if a path contains the '#' symbol. So I use a modification of the John Sibly answer that is combination UriBuilder.Path and UriBuilder.Fragment:

public static string AssemblyDirectory
{
    get
    {
        string codeBase = Assembly.GetExecutingAssembly().CodeBase;
        UriBuilder uri = new UriBuilder(codeBase);
        //modification of the John Sibly answer    
        string path = Uri.UnescapeDataString(uri.Path.Replace("/", "\\") + 
          uri.Fragment.Replace("/", "\\"));
        return Path.GetDirectoryName(path);
     }
}

Answer 24

For ASP.Net, it doesn't work. I found a better covered solution at Why AppDomain.CurrentDomain.BaseDirectory not contains "bin" in asp.net app?. It works for both Win Application and ASP.Net Web Application.

public string ApplicationPath
    {
        get
        {
            if (String.IsNullOrEmpty(AppDomain.CurrentDomain.RelativeSearchPath))
            {
                return AppDomain.CurrentDomain.BaseDirectory; //exe folder for WinForms, Consoles, Windows Services
            }
            else
            {
                return AppDomain.CurrentDomain.RelativeSearchPath; //bin folder for Web Apps 
            }
        }
    }

Answer 25

This is what I came up with. In between web projects, unit tests (nunit and resharper test runner); I found this worked for me.

I have been looking for code to detect what configuration the build is in, Debug/Release/CustomName. Alas, the #if DEBUG. So if someone can improve that!

Feel free to edit and improve.

Getting app folder. Useful for web roots, unittests to get the folder of test files.

public static string AppPath
{
    get
    {
        DirectoryInfo appPath = new DirectoryInfo(AppDomain.CurrentDomain.BaseDirectory);

        while (appPath.FullName.Contains(@"\bin\", StringComparison.CurrentCultureIgnoreCase)
                || appPath.FullName.EndsWith(@"\bin", StringComparison.CurrentCultureIgnoreCase))
        {
            appPath = appPath.Parent;
        }
        return appPath.FullName;
    }
}

Getting bin folder: Useful for executing assemblies using reflection. If files are copied there due to build properties.

public static string BinPath
{
    get
    {
        string binPath = AppDomain.CurrentDomain.BaseDirectory;

        if (!binPath.Contains(@"\bin\", StringComparison.CurrentCultureIgnoreCase)
            && !binPath.EndsWith(@"\bin", StringComparison.CurrentCultureIgnoreCase))
        {
            binPath = Path.Combine(binPath, "bin");
            //-- Please improve this if there is a better way
            //-- Also note that apps like webapps do not have a debug or release folder. So we would just return bin.
#if DEBUG
            if (Directory.Exists(Path.Combine(binPath, "Debug"))) 
                        binPath = Path.Combine(binPath, "Debug");
#else
            if (Directory.Exists(Path.Combine(binPath, "Release"))) 
                        binPath = Path.Combine(binPath, "Release");
#endif
        }
            return binPath;
    }
}

Answer 26

This should work:

ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap();
Assembly asm = Assembly.GetCallingAssembly();
String path = Path.GetDirectoryName(new Uri(asm.EscapedCodeBase).LocalPath);

string strLog4NetConfigPath = System.IO.Path.Combine(path, "log4net.config");

I am using this to deploy DLL file libraries along with some configuration file (this is to use log4net from within the DLL file).

Answer 27

I find my solution adequate for the retrieval of the location.

var executingAssembly = new FileInfo((Assembly.GetExecutingAssembly().Location)).Directory.FullName;

Answer 28

I got the same behaviour in the NUnit in the past. By default NUnit copies your assembly into the temp directory. You can change this behaviour in the NUnit settings:

Maybe TestDriven.NET and MbUnit GUI have the same settings.

Answer 29

I use this to get the path to the Bin Directory:

var i = Environment.CurrentDirectory.LastIndexOf(@"\");
var path = Environment.CurrentDirectory.Substring(0,i); 

You get this result:

"c:\users\ricooley\documents\visual studio 2010\Projects\Windows_Test_Project\Windows_Test_Project\bin"

Answer 30

Web application?

Server.MapPath("~/MyDir/MyFile.ext")