How do I do HTTP GET and POST in Progress/OpenEdge ABL?
https://stackoverflow.com/questions/2066721
-
20-09-2019 - |
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianQuestion
The Progress docs spill plenty of ink on SOAP, but I'm having trouble finding the example for a simple HTTP GET/POST with Progress ABL.
How do I GET and POST strings to/from a URL?
Can the URL be https://?
Can Progress provide HTTP Basic or HTTP Digest authentication?
Solution
Openedge has built in statements for handling SOAP services, but no simple statement for a GET/POST. What it does have, however, is a mechanism to read / write to specific sockets. So you could use this to build a HTTP post routine, or for that matter a routine to handle any other socket based protocol.
There is a routine - http.p - which will do a GET for you. Will let you see how the socket programming works if nothing else. You should be able to modify it quite easily to do a simple POST, but using SSL or getting into authentication might take quite a bit of work. You might be easier just dropping out to CURL in this case.
http.p used to be available from freeframework.org, but I've just checked and that domain has expired, so I've posted the code below.
/*-----------------------------------------------------------------------*
File........: http.p
Version.....: 1.1
Description : Makes a "Get" request from an HTTP server
Input Param : pHost = host name (without the "http://")
pPort = port number (usually 80)
pURL = begin with the first slash after the domain name.
Output Param: pResult = 0 or 1 (character)
pResponse = http headers returned
pContent = the document returned.
Author......: S.E. Southwell, Mario Paranhos - United Systems, Inc. (770) 449-9696
Created.....: 12/13/2000
Notes.......: Will not work with HTTPS.
Usage:
define var v-result as char no-undo.
define var v-response as char no-undo.
define var v-content as char no-undo.
{&out} "Hello" skip.
put stream webstream control null(0).
run proc/http.p("www.whosplayin.com","80","/",output v-result,output v-response,output v-content).
{&out} v-result "<hr>" skip
html-encode(v-response) "<hr>" skip
html-encode(v-content) "<hr>" skip
.
Last Modified: 10/20/01 - SES - Fixed to work in batch mode, or within a UDF.
--------------------------------------------------------------------------*/
&SCOPED-DEFINE HTTP-NEWLINE CHR(13) + CHR(10)
&SCOPED-DEFINE RESPONSE-TIMEOUT 45
DEFINE INPUT PARAMETER pHOST AS CHAR NO-UNDO.
DEFINE INPUT PARAMETER pPORT AS CHAR NO-UNDO.
DEFINE INPUT PARAMETER pURL AS CHAR NO-UNDO.
DEFINE OUTPUT PARAMETER pRESULT AS CHAR NO-UNDO.
DEFINE OUTPUT PARAMETER pRESPONSE AS CHAR NO-UNDO.
DEFINE OUTPUT PARAMETER pContent AS CHAR NO-UNDO.
DEFINE VARIABLE requestString AS CHAR NO-UNDO.
DEFINE VARIABLE vSocket AS HANDLE NO-UNDO.
DEFINE VARIABLE vBuffer AS MEMPTR NO-UNDO.
DEFINE VARIABLE vloop AS LOGICAL NO-UNDO.
DEFINE VARIABLE vPackets AS INTEGER NO-UNDO.
DEFINE VARIABLE wStatus AS LOGICAL NO-UNDO.
ASSIGN requestString = "GET " + pURL + " HTTP/1.0" + {&HTTP-NEWLINE} +
"Accept: */*" + {&HTTP-NEWLINE} +
"Host: " + phost + {&HTTP-NEWLINE} +
/*"Connection: Keep-Alive" + {&HTTP-NEWLINE} + */
{&HTTP-NEWLINE}.
/*OPEN THE SOCKET*/
CREATE SOCKET vSocket.
vSocket:SET-READ-RESPONSE-PROCEDURE ("readHandler",THIS-PROCEDURE).
ASSIGN wstatus = vSocket:CONNECT("-H " + phost + " -S " + pport) NO-ERROR.
/*Now make sure the socket is open*/
IF wstatus = NO THEN DO:
pResult = "0:No Socket".
DELETE OBJECT vSocket.
RETURN.
END.
/*Got socket - Now make HTTP request*/
SET-SIZE(vBuffer) = LENGTH(requestString) + 1.
PUT-STRING(vBuffer,1) = requestString.
vSocket:WRITE(vBuffer, 1, LENGTH(requestString)).
SET-SIZE(vBuffer) = 0.
/*Wait for a response*/
ASSIGN vloop = TRUE. /*Turns off automatically when request is done*/
DEFINE VAR vstarttime AS INTEGER.
ASSIGN vstarttime = etime.
WAITLOOP: DO WHILE vloop:
PROCESS EVENTS.
PAUSE 1.
/* Build in timer in case sending is never set to NO
this will terminate the program after 60 seconds
start-Etime will be reset by WriteData each time there
is activity on the socket to allow for long transmissions */
IF vstarttime + ({&RESPONSE-TIMEOUT} * 1000) < ETIME
THEN DO:
MESSAGE "timed out at " + string(etime - vstarttime) + " msec".
vSocket:DISCONNECT().
ASSIGN pResult = "0:Failure".
RETURN.
END. /*No Response, or timed out*/
END.
/*At this point, pResponse should be populated with the result (up to 32K)*/
vSocket:DISCONNECT().
DELETE OBJECT vSocket.
/*All Done!*/
ASSIGN pResult = "1:Success".
ASSIGN
pContent = SUBSTRING(pResponse,INDEX(pResponse,{&HTTP-NEWLINE} + {&HTTP-NEWLINE}),-1)
.
ASSIGN
pResponse = SUBSTRING(pResponse,1,INDEX(pResponse,{&HTTP-NEWLINE} + {&HTTP-NEWLINE}))
.
RETURN.
/*Handle the response from the webserver*/
PROCEDURE readHandler:
DEFINE VARIABLE bytesAvail AS INTEGER NO-UNDO.
DEFINE VARIABLE b AS MEMPTR NO-UNDO.
DEFINE VARIABLE lastBytes AS INTEGER NO-UNDO.
IF vSocket:connected() THEN ASSIGN bytesAvail = vSocket:GET-BYTES-AVAILABLE().
IF bytesAvail = 0 THEN DO: /*All Done*/
ASSIGN vloop = FALSE.
RETURN.
END.
/*OK, there's something on the wire... Read it in*/
SET-SIZE(b) = bytesAvail + 1.
vSocket:READ(b, 1, bytesAvail, 1).
ASSIGN pResponse = pResponse + GET-STRING(b,1).
SET-SIZE(b) = 0.
END PROCEDURE. /*readHandler*/
OTHER TIPS
For future onlookers at this question:
Openedge now (since 11.5.1 I believe) has built in support for calling REST based webservices. These are enclosed in a provided .pl archive that is not in your PROPATH by default so that needs to be handled first (or the archive can be moved to a "better location").
The propath can be set in a number of ways, init files, registry, programatically etc. This is how it can be done in ABL (if done this way it must be repeated for each new session).
PROPATH = PROPATH + ",c:\pathtoprogress\OpenEdge\gui\OpenEdge.Net.pl".
There's also a version in "tty" directory, as well as an archive containing source code in the "src" directory.
Here's a very basic example:
USING OpenEdge.Net.HTTP.IHttpRequest.
USING OpenEdge.Net.HTTP.IHttpResponse.
USING OpenEdge.Net.HTTP.ClientBuilder.
USING OpenEdge.Net.HTTP.RequestBuilder.
DEFINE VARIABLE oRequest AS IHttpRequest NO-UNDO.
DEFINE VARIABLE oResponse AS IHttpResponse NO-UNDO.
oRequest = RequestBuilder:Get('http://stackoverflow.com/'):Request.
oResponse = ClientBuilder:Build():Client:Execute(oRequest).
MESSAGE
oResponse:StatusCode SKIP
oResponse:StatusReason SKIP
VIEW-AS ALERT-BOX.
Progress Kbase ID: 20011: "Sample Code To Access a Web Site via HTTP with 4GL Sockets" is also a nice, generic example.
I recommend using the code example of Gordon Roberertson above because there is the "WAIT-FOR" of the Progress KB article replaced with a loop. So the prcoedure terminates after timeout period if anything goes wrong.
Please note that changing anything in requestString can cause timeouts. But adding a User-Agent is possible if you need for logging on your webserver:
ASSIGN requestString = "GET " + Path + " HTTP/1.0" + {&HTTP-NEWLINE}
+ "Accept: */*" + {&HTTP-NEWLINE}
+ "User-Agent: " + "User Agent String" + {&HTTP-NEWLINE}
+ "Host: " + Host + {&HTTP-NEWLINE}
+ {&HTTP-NEWLINE}.
Thanks to Gordon for his code example.
