Problems installing R packages

Question

I'm setting up a new laptop running Gentoo and wish to install R (as I do on all of my computers!).

However, I've hit a bit of a problem when it comes to installing packages.

I first tried to:

> install.packages(c("ggplot2", "plyr", "reshape2"))

And it duly downloaded all of the packages and its dependencies. However they didn't install reporting.

Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted
Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library

Not a problem I'll just install the data.table package, unfortunately...

> install.packages("data.table")
trying URL 'http://cran.uk.r-project.org/src/contrib/data.table_1.8.2.tar.gz'
Content type 'application/x-gzip' length 818198 bytes (799 Kb)
opened URL
==================================================
downloaded 799 Kb

Error in library(data.table) : there is no package called ‘data.table’
Calls: .First -> library
Execution halted

The downloaded source packages are in
    ‘/tmp/RtmpbQtALj/downloaded_packages’
Updating HTML index of packages in '.Library'
Making packages.html  ... done
Warning message:
In install.packages("data.table") :
  installation of package ‘data.table’ had non-zero exit status

And there is no indication of why installation failed at all, so I've no idea how to go about solving this? A traceback() isn't available either.

GCC is installed and configured as the output of gcc-config shows (and the fact that I can install other software from source no problem).

# gcc-config -l
 [1] x86_64-pc-linux-gnu-4.6.3 *

Stumped as to how to go about solving this one. Any thoughts or ideas on how to get more information out of install.packages() welcome.

EDIT : contents of .First as requested....

> .First
function () 
{
    library(data.table)
    library(foreign)
    library(ggplot2)
    library(Hmisc)
    library(lattice)
    library(plyr)
    library(rms)
    library(xtable)
    cat("\nWelcome at", date(), "\n")
}

EDIT 2 : No Rprofile.site but there is /usr/lib64/R/library/base/R/Rprofile which has....

# cat /usr/lib64/R/library/base/R/Rprofile 
### This is the system Rprofile file. It is always run on startup.
### Additional commands can be placed in site or user Rprofile files
### (see ?Rprofile).

### Notice that it is a bad idea to use this file as a template for
### personal startup files, since things will be executed twice and in
### the wrong environment (user profiles are run in .GlobalEnv).

.GlobalEnv <- globalenv()
attach(NULL, name = "Autoloads")
.AutoloadEnv <- as.environment(2)
assign(".Autoloaded", NULL, envir = .AutoloadEnv)
T <- TRUE
F <- FALSE
R.version <- structure(R.Version(), class = "simple.list")
version <- R.version            # for S compatibility

## for backwards compatibility only
R.version.string <- R.version$version.string

## NOTA BENE: options() for non-base package functionality are in places like
##            --------- ../utils/R/zzz.R

options(keep.source = interactive())
options(warn = 0)
# options(repos = c(CRAN="@CRAN@"))
# options(BIOC = "http://www.bioconductor.org")

options(timeout = 60)
options(encoding = "native.enc")
options(show.error.messages = TRUE)
## keep in sync with PrintDefaults() in  ../../main/print.c :
options(scipen = 0)
options(max.print = 99999)# max. #{entries} in internal printMatrix()
options(add.smooth = TRUE)# currently only used in 'plot.lm'
options(stringsAsFactors = TRUE)
if(!interactive() && is.null(getOption("showErrorCalls")))
    options(showErrorCalls = TRUE)

local({dp <- Sys.getenv("R_DEFAULT_PACKAGES")
       if(identical(dp, "")) # marginally faster to do methods last
           dp <- c("datasets", "utils", "grDevices", "graphics",
                   "stats", "methods")
       else if(identical(dp, "NULL")) dp <- character(0)
       else dp <- strsplit(dp, ",")[[1]]
       dp <- sub("[[:blank:]]*([[:alnum:]]+)", "\\1", dp) # strip whitespace
       options(defaultPackages = dp)
     })

## Expand R_LIBS_* environment variables.
Sys.setenv(R_LIBS_SITE =
           .expand_R_libs_env_var(Sys.getenv("R_LIBS_SITE")))
Sys.setenv(R_LIBS_USER =
           .expand_R_libs_env_var(Sys.getenv("R_LIBS_USER")))

.First.sys <- function()
{
    for(pkg in getOption("defaultPackages")) {
        res <- require(pkg, quietly = TRUE, warn.conflicts = FALSE,
                       character.only = TRUE)
        if(!res)
            warning(gettextf('package %s in options("defaultPackages") was not found',     sQuote(pkg)),
                    call.=FALSE, domain = NA)
    }
}

.OptRequireMethods <- function()
{
      if("methods" %in% getOption("defaultPackages")) {
        res <- require("methods", quietly = TRUE, warn.conflicts = FALSE,
                       character.only = TRUE)
        if(!res)
            warning('package "methods" in options("defaultPackages") was not found', call.=FALSE)
    }
}

if(nzchar(Sys.getenv("R_BATCH"))) {
    .Last.sys <- function()
    {
        cat("> proc.time()\n")
        print(proc.time())
    }
    ## avoid passing on to spawned R processes
    ## A system has been reported without Sys.unsetenv, so try this
    try(Sys.setenv(R_BATCH=""))
}
###-*- R -*- Unix Specific ----

.Library <- file.path(R.home(), "library")
.Library.site <- Sys.getenv("R_LIBS_SITE")
.Library.site <- if(!nchar(.Library.site)) file.path(R.home(), "site-library") else unlist(strsplit(.Library.site, ":"))
.Library.site <- .Library.site[file.exists(.Library.site)]

invisible(.libPaths(c(unlist(strsplit(Sys.getenv("R_LIBS"), ":")),
                      unlist(strsplit(Sys.getenv("R_LIBS_USER"), ":")
                      ))))

local({
## we distinguish between R_PAPERSIZE as set by the user and by configure
papersize <- Sys.getenv("R_PAPERSIZE_USER")
if(!nchar(papersize)) {
    lcpaper <- Sys.getlocale("LC_PAPER") # might be null: OK as nchar is 0
    papersize <- if(nchar(lcpaper))
        if(length(grep("(_US|_CA)", lcpaper))) "letter" else "a4"
    else Sys.getenv("R_PAPERSIZE")
}
options(papersize = papersize,
        printcmd = Sys.getenv("R_PRINTCMD"),
        dvipscmd = Sys.getenv("DVIPS", "dvips"),
        texi2dvi = Sys.getenv("R_TEXI2DVICMD"),
        browser = Sys.getenv("R_BROWSER"),
        pager = file.path(R.home(), "bin", "pager"),
        pdfviewer = Sys.getenv("R_PDFVIEWER"),
        useFancyQuotes = TRUE)
})

## non standard settings for the R.app GUI of the Mac OS X port
if(.Platform$GUI == "AQUA") {
    ## this is set to let RAqua use both X11 device and X11/TclTk
    if (Sys.getenv("DISPLAY") == "")
    Sys.setenv("DISPLAY" = ":0")

    ## this is to allow gfortran compiler to work
    Sys.setenv("PATH" = paste(Sys.getenv("PATH"),":/usr/local/bin",sep = ""))
}## end "Aqua"

local({
    tests_startup <- Sys.getenv("R_TESTS")
    if(nzchar(tests_startup)) source(tests_startup)
})

Answer 1

Looks like data.table is not installed for the user that is running the install.packages command. I think wrapping that .First function in if (interactive()) { } would be a good idea in general. Otherwise, you need to install data.table and any other packages that load at startup since install.packages runs the .Rprofile file when starting

Answer 2

WARNING: You're using a non-UTF8 locale, therefore only ASCII characters will work. Please read R for Mac OS X FAQ (see Help) section 9 and adjust your system preferences accordingly. [History restored from /Users/carlosaburto/.Rapp.history]

defaults write org.R-project.R force.LANG en_US.UTF-8 Error: unexpected symbol in "defaults write" starting httpd help server ... done