PHP Mail() Contact-us form works fine if entering a Gmail sending address, but not with Yahoo [duplicate]

Question

This question is an exact duplicate of:

• Reconfiguring PHP Mail() Smarty Contact Form 1 answer

I've setup an ecommerce site using Prestashop and when testing their contact form, I found that I was not receiving any messages if user enters Yahoo email address as the senders address. I have no problems, however, if the user enters a Gmail address.

Prestashop is set up currently to use the PHP Mail() function for the contact form. What could be the problem and what solutions could I look at as I obviously need to receive mails from everyone, not just those with gmail addresses.

The following is the code in the contact-form.php page:-

<?php

$useSSL = true;

include(dirname(__FILE__).'/config/config.inc.php');
include(dirname(__FILE__).'/header.php');

$errors = array();

$smarty->assign('contacts', Contact::getContacts(intval($cookie->id_lang)));

if (Tools::isSubmit('submitMessage'))
{
    if (!($from = Tools::getValue('from')) OR !Validate::isEmail($from))
        $errors[] = Tools::displayError('invalid e-mail address');
    elseif (!($message = nl2br2(Tools::getValue('message'))))
        $errors[] = Tools::displayError('message cannot be blank');
    elseif (!Validate::isMessage($message))
        $errors[] = Tools::displayError('invalid message');
    elseif (!($id_contact = intval(Tools::getValue('id_contact'))) OR !(Validate::isLoadedObject($contact = new Contact(intval($id_contact), intval($cookie->id_lang)))))
        $errors[] = Tools::displayError('please select a contact in the list');
    else
    {
        if (intval($cookie->id_customer))
            $customer = new Customer(intval($cookie->id_customer));
        if (Mail::Send(intval($cookie->id_lang), 'contact', 'Message from contact form', array('{email}' => $_POST['from'], '{message}' => stripslashes($message)), $contact->email, $contact->name, $from, (intval($cookie->id_customer) ? $customer->firstname.' '.$customer->lastname : $from)))
            $smarty->assign('confirmation', 1);
        else
            $errors[] = Tools::displayError('an error occurred while sending message');
    }
}

$email = Tools::safeOutput(Tools::getValue('from', ((isset($cookie) AND isset($cookie->email) AND Validate::isEmail($cookie->email)) ? $cookie->email : '')));
$smarty->assign(array(
    'errors' => $errors,
    'email' => $email
));

$smarty->display(_PS_THEME_DIR_.'contact-form.tpl');
include(dirname(__FILE__).'/footer.php');

?> 

---

UPDATE:
I contacted my email hosting company and they gave the following suggestion:-

You would need to change the Email address in the field $from to any Email address on the domain name on which you are incorporating this script. For example, if your Domain Name is abc.com, then you would define the From Email address as some-name@abc.com. This Email address need not be existing on the Mail Server of abc.com, however, the domain name in the $from field has to be yours. You may use an Email address such as Do_Not_reply@abc.com.

The value in the $mailto field needs to be changed to the Email address, where email containing the data submitted through the form needs to be delivered.

So in the context of Prestashop's contact-form.php (code given above), how would I go about changing it?

Answer 1

The solution for this has been found as this questions is almost identical to:- Reconfiguring PHP Mail() Smarty Contact Form.

Answer 2

PHP mail() is really a raw way to send emails. It's quite easy to screw up things with mail() if you don't know well the email RFCs (standards)...

I suggest you to use PHPMailer (or similar librairies) or post the actual code your using.

Answer 3

You can't use addresses that are not bound to your servers as sender addresses. This will be blocked by every self-respecting spam blocking mechanism. It's actually a miracle that it works with GMail addresses.

If you want to be able to directly reply to mails that people send to you through your contact form, add the following header to the 4th parameter to your mail() call:

reply-to: customers_email_address

but as the physical sender address, always use

from: something@yourserver.com

Answer 4

There's a fifth parameter you can supply to the mail() call.

Here is what I used to fix my drupal mail (simplified):

return @mail($message['to'],
             $message['subject'],
             $message['body'],
             join("\n", $mimeheaders),
             '-f' . $message['from'] );

Since AlexV correctly remarked that using unescaped values is dangerous, this is the full version. Please note that it is taken from the drupal sources (with a small fix).

    function drupal_mail_wrapper($message)
    {
        $mimeheaders = array();

        foreach ($message['headers'] as $name => $value) 
        {
            $mimeheaders[] = $name .': '. mime_header_encode($value);
        }

        return @mail(
            $message['to'],
            mime_header_encode($message['subject']),
            // Note: e-mail uses CRLF for line-endings, but PHP's API requires LF.
            // They will appear correctly in the actual e-mail that is sent.
            str_replace("\r", '', $message['body']),
            // For headers, PHP's API suggests that we use CRLF normally,
            // but some MTAs incorrecly replace LF with CRLF. See #234403.
            join("\n", $mimeheaders),
            ($message['from'] ? '-f' . $message['from'] : '') );
    }

Hope that helps, Chris

Answer 5

I've been using this small code to send e-mails in a newsletter system of my own. This excerpt handles specifically a single message. It's based on RFC specs.

    /**
     * @package  jaMailBroadcast
     * @author   Joel A. Villarreal Bertoldi (design at joelalejandro.com)
     *
     * @usage    
     *
     *     $msg = new jaMailBroadcast_Message("My Website", "my@website.com");
     *     $msg->to = new jaMailBroadcast_Contact("John Doe", "john@doe.com");
     *     $msg->subject = "Something";
     *     $msg->body = "Your message here. You <b>can use</b> HTML.";
     *     $msg->send();
     **/

    class jaMailBroadcast_Contact
    {
        public $id;
        public $name;
        public $email;

        function __construct($contactName, $contactEmail, $contactId = "")
        {
            $this->name = $contactName;
            $this->email = $contactEmail;
            if (!$contactId)
                $this->id = uniqid("contact_");
            else
                $this->id = $contactId;
        }

        function __toString()
        {
            return json_encode
            (
                array
                (
                  "id" => $this->id,
                  "name" => $this->name,
                  "email" => $this->email
                )
            );
        }

        function rfc882_header()
        {
            return sprintf('"%s" ', $this->name, $this->email);
        }
    }

    class jaMailBroadcast_Message
    {
        public $from;
        public $to;
        public $subject;
        public $body;
        public $mime_boundary;
        public $headerTemplate;
        public $footerTemplate;

        function __construct($fromName, $fromEmail)
        {
            $this->from = new jaMailBroadcast_Contact($fromName, $fromEmail);
            $this->mime_boundary = "==" . md5(time());
        }

        private function mail_headers($EOL = "\n")
        {
            $headers
              = "From: " . $this->from->rfc882_header() . $EOL
              . "Reply-To: from->email . ">" . $EOL
              . "Return-Path: from->email . ">" . $EOL
              . "MIME-Version: 1.0" . $EOL
              . "Content-Type: multipart/alternative; boundary=\"{$this->mime_boundary}\"" . $EOL
              . "User-Agent: jaMailBroadcast/1.0" . $EOL
              . "X-Priority: 3 (Normal)" . $EOL
              . "Importance: Normal" . $EOL
              . "X-Mailer: jaMailBroadcast";

            return $headers;
        }

        private function rfc882_body_format($EOL = "\r\n")
        {
          return wordwrap($this->body, 70, $EOL);
        }

        function send()
        {
            $EOL =
                 (
                    stripos($this->to->email, "hotmail") !== false
                  ||
                    stripos($this->to->email, "live") !== false
                 )
                  ? "\n"
                  : "\n";

            return mail
            (
                $this->to->rfc882_header(),
                $this->subject,
                $this->multipart_alternative_body($EOL),
                $this->mail_headers($EOL),
                "-f" . $this->from->email
            );
        }

        private function multipart_alternative_body($EOL = "\r\n")
        {
            $multipart
                    = "Content-Transfer-Encoding: 7bit" . $EOL
                    . "This is a multi-part message in MIME format. This part of the E-mail should never be seen. If you are reading this, consider upgrading your e-mail client to a MIME-compatible client." . $EOL . $EOL
                    = "--{$this->mime_boundary}" . $EOL
                    . "Content-Type: text/plain; charset=iso-8859-1" . $EOL
                    . "Content-Transfer-Encoding: 7bit" . $EOL . $EOL
                    . strip_tags($this->br2nl($this->headerTemplate)) . $EOL . $EOL
                    . strip_tags($this->br2nl($this->body)) . $EOL . $EOL
                    . strip_tags($this->br2nl($this->footerTemplate)) . $EOL . $EOL
                    . "--{$this->mime_boundary}" . $EOL
                    . "Content-Type: text/html; charset=iso-8859-1" . $EOL
                    . "Content-Transfer-Encoding: 7bit" . $EOL . $EOL
                    . $this->headerTemplate . $EOL
                    . $this->body . $EOL
                    . $this->footerTemplate . $EOL
                    . "--{$this->mime_boundary}--" . $EOL;

            return $multipart;
        }

        private function br2nl($text, $EOL = "\n")
        {
            $text = str_ireplace("<br>", $EOL, $text);
            $text = str_ireplace("<br />", $EOL, $text);
            return $text;
        }
    }

Answer 6

I changed the 'from' to $_REQUEST['from']. You can change it $_POST['from'] as well. replace 2 'from' with this and change $contact->email to any desired email where you want to deliver that email.

it worked for me.