How do I push amended commit to the remote Git repository?

Question

When I've worked a bit with my source code, I did my usual thing commit and then I pushed to a remote repository. But then I noticed I forgot to organize my imports in the source code. So I do the amend command to replace the previous commit:

> git commit --amend

Unfortunately the commit can't be pushed back to the repository. It is rejected like this:

> git push origin
To //my.remote.repo.com/stuff.git/
 ! [rejected]        master -> master (non-fast forward)
error: failed to push some refs to '//my.remote.repo.com/stuff.git/'

What should I do? (I can access the remote repository.)

Answer 1

I actually once pushed with --force and .git repository and got scolded by Linus BIG TIME. In general this will create a lot of problems for other people. A simple answer is "Don't do it".

I see others gave the recipe for doing so anyway, so I won't repeat them here. But here is a tip to recover from the situation after you have pushed out the amended commit with --force (or +master).

1. Use git reflog to find the old commit that you amended (call it old, and we'll call the new commit you created by amending new).
2. Create a merge between old and new, recording the tree of new, like git checkout new && git merge -s ours old.
3. Merge that to your master with git merge master
4. Update your master with the result with git push . HEAD:master
5. Push the result out.

Then people who were unfortunate enough to have based their work on the commit you obliterated by amending and forcing a push will see the resulting merge will see that you favor new over old. Their later merges will not see the conflicts between old and new that resulted from your amending, so they do not have to suffer.

Answer 2

You are seeing a Git safety feature. Git refuses to update the remote branch with your branch, because your branch's head commit is not a direct descendent of the current head commit of the branch that you are pushing to.

If this were not the case, then two people pushing to the same repository at about the same time would not know that there was a new commit coming in at the same time and whoever pushed last would lose the work of the previous pusher without either of them realising this.

If you know that you are the only person pushing and you want to push an amended commit or push a commit that winds back the branch, you can 'force' Git to update the remote branch by using the -f switch.

git push -f origin master

Even this may not work as Git allows remote repositories to refuse non-fastforward pushes at the far end by using the configuration variable receive.denynonfastforwards. If this is the case the rejection reason will look like this (note the 'remote rejected' part):

 ! [remote rejected] master -> master (non-fast forward)

To get around this, you either need to change the remote repository's configuration or as a dirty hack you can delete and recreate the branch thus:

git push origin :master
git push origin master

In general the last parameter to git push uses the format <local_ref>:<remote_ref>, where local_ref is the name of the branch on the local repository and remote_ref is the name of the branch on the remote repository. This command pair uses two shorthands. :master has a null local_ref which means push a null branch to the remote side master, i.e. delete the remote branch. A branch name with no : means push the local branch with the given name to the remote branch with the same name. master in this situation is short for master:master.

Answer 3

Quick rant: The fact that no one has posted the simple answer here demonstrates the desperate user-hostility exhibited by the Git CLI.

Anyway, the "obvious" way to do this, assuming you haven't tried to force the push, is to pull first. This pulls the change that you amended (and so no longer have) so that you have it again.

Once you have resolved any conflicts, you can push again.

So:

git pull

If you get errors in pull, maybe something is wrong in your local repository configuration (I had a wrong ref in the .git/config branch section).

And after

git push

Maybe you will get an extra commit with the subject telling about a "Trivial merge".

Answer 4

Short answer: Don't push amended commits to a public repo.

Long answer: A few Git commands, like git commit --amend and git rebase, actually rewrite the history graph. This is fine as long as you haven't published your changes, but once you do, you really shouldn't be mucking around with the history, because if someone already got your changes, then when they try to pull again, it might fail. Instead of amending a commit, you should just make a new commit with the changes.

However, if you really, really want to push an amended commit, you can do so like this:

$ git push origin +master:master

The leading + sign will force the push to occur, even if it doesn't result in a "fast-forward" commit. (A fast-forward commit occurs when the changes you are pushing are a direct descendant of the changes already in the public repo.)

Answer 5

Here is a very simple and clean way to push your changes after you have already made a commit --amend:

git reset --soft HEAD^
git stash
git push -f origin master
git stash pop
git commit -a
git push origin master

Which does the following:

• Reset branch head to parent commit.
• Stash this last commit.
• Force push to remote. The remote now doesn't have the last commit.
• Pop your stash.
• Commit cleanly.
• Push to remote.

Remember to change "origin" and "master" if applying this to a different branch or remote.

Answer 6

I have solved it by discarding my local amended commit and adding the new changes on top:

# Rewind to commit before conflicting
git reset --soft HEAD~1

# Pull the remote version
git pull

# Add the new commit on top
git add ...
git commit
git push

Answer 7

I had the same problem.

• Accidentally amended the last commit that was already pushed
• Done a lot of changes locally, committed some five times
• Tried to push, got an error, panicked, merged remote, got a lot of not-my-files, pushed, failed, etc.

As a Git-newbie, I thought it was complete FUBAR.

Solution: Somewhat like @bara suggested + created a local backup branch

# Rewind to commit just before the pushed-and-amended one.
# Replace <hash> with the needed hash.
# --soft means: leave all the changes there, so nothing is lost.
git reset --soft <hash>

# Create new branch, just for a backup, still having all changes in it.
# The branch was feature/1234, new one - feature/1234-gone-bad
git checkout -b feature/1234-gone-bad

# Commit all the changes (all the mess) not to lose it & not to carry around
git commit -a -m "feature/1234 backup"

# Switch back to the original branch
git checkout feature/1234

# Pull the from remote (named 'origin'), thus 'repairing' our main problem
git pull origin/feature/1234

# Now you have a clean-and-non-diverged branch and a backup of the local changes.
# Check the needed files from the backup branch
git checkout feature/1234-gone-bad -- the/path/to/file.php

Maybe it's not a fast and clean solution, and I lost my history (1 commit instead of 5), but it saved a day's work.

Answer 8

If you have not pushed the code to your remote branch (GitHub/Bitbucket) you can change the commit message on the command line as below.

 git commit --amend -m "Your new message"

If you're working on a specific branch, do this:

git commit --amend -m "BRANCH-NAME: new message"

If you've already pushed the code with a wrong message then you need to be careful when changing the message. i.e after you change the commit message and try pushing it again you end up with having issues. To make it smooth follow the following steps.

Please read the entire answer before doing it

git commit --amend -m "BRANCH-NAME : your new message"

git push -f origin BRANCH-NAME                # Not a best practice. Read below why?

Important note: When you use the force push directly you might end up with code issues that other developers are working on the same branch. So to avoid those conflicts you need to pull the code from your branch before making the force push:

 git commit --amend -m "BRANCH-NAME : your new message"
 git pull origin BRANCH-NAME
 git push -f origin BRANCH-NAME

This is the best practice when changing the commit message, if it was already pushed.

Answer 9

If you know nobody has pulled your un-amended commit, use the --force-with-lease option of git push.

In TortoiseGit, you can do the same thing under "Push..." options "Force: May discard" and checking "known changes".

Force (May discard known changes) allows the remote repository to accept a safer non-fast-forward push. This can cause the remote repository to lose commits; use it with care. This can prevent from losing unknown changes from other people on the remote. It checks if the server branch points to the same commit as the remote-tracking branch (known changes). If yes, a force push will be performed. Otherwise it will be rejected. Since git does not have remote-tracking tags, tags cannot be overwritten using this option.

Answer 10

Here is a very simple and clean way to push your changes after you have already made a git add "your files" and git commit --amend:

git push origin master -f

or:

git push origin master --force

Answer 11

You are getting this error because the Git remote already has these commit files. You have to force push the branch for this to work:

git push -f origin branch_name

Also make sure you pull the code from remote as someone else on your team might have pushed to the same branch.

git pull origin branch_name

This is one of the cases where we have to force push the commit to remote.

Answer 12

I had to fix this problem with pulling from the remote repo and deal with the merge conflicts that arose, commit and then push. But I feel like there is a better way.

Answer 13

I just kept doing what Git told me to do. So:

• Can't push because of amended commit.
• I do a pull as suggested.
• Merge fails. so I fix it manually.
• Create a new commit (labeled "merge") and push it.
• It seems to work!

Note: The amended commit was the latest one.

Answer 14

Here, How I fixed an edit in a previous commit:

1. Save your work so far.
2. Stash your changes away for now if made: git stash Now your working copy is clean at the state of your last commit.
3. Make the edits and fixes.
4. Commit the changes in "amend" mode: git commit --all --amend

5. Your editor will come up asking for a log message (by default, the old log message). Save and quit the editor when you're happy with it.

   The new changes are added on to the old commit. See for yourself with git log and git diff HEAD^

6. Re-apply your stashed changes, if made: git stash apply