¿Cómo encontrar el puerto adecuado para NSNetService en iOS?

Question

Estoy creando una aplicación con dos componentes, un componente de iPhone y un componente de Mac.Se supone que deben comunicarse entre sí mediante bonjour.Utilizo el siguiente código en Mac para encontrar un puerto para el servicio:

NSSocketPort *socket = [[NSSocketPort alloc] init];
struct sockaddr *addr = (struct sockaddr *)[[socket address] bytes];
int port = 9876;
if(addr->sa_family == AF_INET) {
    port = ntohs(((struct sockaddr_in *)addr)->sin_port);
} else if(addr->sa_family == AF_INET6) {
    port = ntohs(((struct sockaddr_in6 *)addr)->sin6_port);
} else {
    [socket release];
    socket = nil;
    NSLog(@"The family is neither IPv4 nor IPv6. Can't handle!!!");
}

También puedo usar este código en el iPhone y ejecutar la aplicación en el simulador, y la conexión funciona bien.Sin embargo, cuando intenté ejecutar este código en un iPhone real, descubrí que NSSocketPort no está disponible en el iPhone.Cuando intento iniciar el servicio con el puerto 9876, la aplicación Mac muestra un error de conexión rechazada cuando intento conectarme.Entonces, ¿cómo puedo encontrar un puerto para usar sin usar NSSocketPort?

Answer 1

Ok, miré el código WITAP de Apple y lo modificó ligeramente para escribirme un método para obtener un puerto:

- (int) getPort {
CFSocketContext socketCtxt = {0, self, NULL, NULL, NULL};   

// Start by trying to do everything with IPv6.  This will work for both IPv4 and IPv6 clients 
// via the miracle of mapped IPv4 addresses.    

CFSocketRef witap_socket = CFSocketCreate(kCFAllocatorDefault, PF_INET6, SOCK_STREAM, IPPROTO_TCP, kCFSocketAcceptCallBack, nil, &socketCtxt);
uint32_t protocolFamily;

if (witap_socket != NULL)   // the socket was created successfully
{
    protocolFamily = PF_INET6;
} else // there was an error creating the IPv6 socket - could be running under iOS 3.x
{
    witap_socket = CFSocketCreate(kCFAllocatorDefault, PF_INET, SOCK_STREAM, IPPROTO_TCP, kCFSocketAcceptCallBack, nil, &socketCtxt);
    if (witap_socket != NULL)
    {
        protocolFamily = PF_INET;
    }
}

/*if (NULL == witap_socket) {
    if (error) *error = [[NSError alloc] initWithDomain:TCPServerErrorDomain code:kTCPServerNoSocketsAvailable userInfo:nil];
    if (witap_socket) CFRelease(witap_socket);
    witap_socket = NULL;
    return NO;
}*/


int yes = 1;
setsockopt(CFSocketGetNative(witap_socket), SOL_SOCKET, SO_REUSEADDR, (void *)&yes, sizeof(yes));

// set up the IP endpoint; use port 0, so the kernel will choose an arbitrary port for us, which will be advertised using Bonjour
if (protocolFamily == PF_INET6)
{
    struct sockaddr_in6 addr6;
    memset(&addr6, 0, sizeof(addr6));
    addr6.sin6_len = sizeof(addr6);
    addr6.sin6_family = AF_INET6;
    addr6.sin6_port = 0;
    addr6.sin6_flowinfo = 0;
    addr6.sin6_addr = in6addr_any;
    NSData *address6 = [NSData dataWithBytes:&addr6 length:sizeof(addr6)];

    CFSocketSetAddress(witap_socket, (CFDataRef)address6);
    /*if (kCFSocketSuccess != CFSocketSetAddress(witap_socket, (CFDataRef)address6)) {
        if (error) *error = [[NSError alloc] initWithDomain:TCPServerErrorDomain code:kTCPServerCouldNotBindToIPv6Address userInfo:nil];
        if (witap_socket) CFRelease(witap_socket);
        witap_socket = NULL;
        return NO;
    }*/

    // now that the binding was successful, we get the port number 
    // -- we will need it for the NSNetService
    NSData *addr = [(NSData *)CFSocketCopyAddress(witap_socket) autorelease];
    memcpy(&addr6, [addr bytes], [addr length]);
    return ntohs(addr6.sin6_port);

} else {
    struct sockaddr_in addr4;
    memset(&addr4, 0, sizeof(addr4));
    addr4.sin_len = sizeof(addr4);
    addr4.sin_family = AF_INET;
    addr4.sin_port = 0;
    addr4.sin_addr.s_addr = htonl(INADDR_ANY);
    NSData *address4 = [NSData dataWithBytes:&addr4 length:sizeof(addr4)];

    CFSocketSetAddress(witap_socket, (CFDataRef)address4);
    /*if (kCFSocketSuccess != CFSocketSetAddress(witap_socket, (CFDataRef)address4)) {
        if (error) *error = [[NSError alloc] initWithDomain:TCPServerErrorDomain code:kTCPServerCouldNotBindToIPv4Address userInfo:nil];
        if (witap_socket) CFRelease(witap_socket);
        witap_socket = NULL;
        return NO;
    }*/

    // now that the binding was successful, we get the port number 
    // -- we will need it for the NSNetService
    NSData *addr = [(NSData *)CFSocketCopyAddress(witap_socket) autorelease];
    memcpy(&addr4, [addr bytes], [addr length]);
    return ntohs(addr4.sin_port);
}

}

Saqué muchas de las cosas de error, por lo que probablemente no sea óptimo, pero funciona.

Answer 2

A partir de iOS 7, NSNetService puede crear y vincular el socket por usted.Si se inicializa con el puerto cero, elegirá un puerto aleatorio:

NSNetService *service = [[NSNetService alloc] initWithDomain:@"local." type:@"_test._tcp." name:@"Test Service" port:0];
[service publishWithOptions:NSNetServiceListenForConnections];

El servicio enviará netService:didAcceptConnectionWithInputStream:outputStream: a su delegado cuando se establece una conexión.