Regresión lineal y grupo por en R
-
19-09-2019 - |
Pregunta
Quiero hacer una regresión lineal en R utilizando la función lm()
. Mis datos es una serie de tiempo anual con un campo para el año (22 años) y otro para el estado (50 estados). Quiero ajustar una regresión para cada estado de manera que al final tengo un vector de respuestas lm. Puedo imaginar haciendo para el bucle para cada estado a continuación, haciendo la regresión dentro del bucle y la adición de los resultados de cada regresión a un vector. Eso no parece muy similar a R, sin embargo. En SAS lo haría un 'por' declaración y en SQL que haría un 'grupo por'. Cuál es la forma R de hacer esto?
Solución
Esto es una forma mediante el paquete lme4
.
library(lme4)
d <- data.frame(state=rep(c('NY', 'CA'), c(10, 10)),
year=rep(1:10, 2),
response=c(rnorm(10), rnorm(10)))
xyplot(response ~ year, groups=state, data=d, type='l')
fits <- lmList(response ~ year | state, data=d)
fits
#------------
Call: lmList(formula = response ~ year | state, data = d)
Coefficients:
(Intercept) year
CA -1.34420990 0.17139963
NY 0.00196176 -0.01852429
Degrees of freedom: 20 total; 16 residual
Residual standard error: 0.8201316
Otros consejos
Este es un método que utiliza la href="http://had.co.nz/plyr" rel="noreferrer"> plyr paquete :
d <- data.frame(
state = rep(c('NY', 'CA'), 10),
year = rep(1:10, 2),
response= rnorm(20)
)
library(plyr)
# Break up d by state, then fit the specified model to each piece and
# return a list
models <- dlply(d, "state", function(df)
lm(response ~ year, data = df))
# Apply coef to each model and return a data frame
ldply(models, coef)
# Print the summary of each model
l_ply(models, summary, .print = TRUE)
Desde 2009, dplyr
ha sido puesto en libertad, que en realidad es una forma muy agradable de hacer este tipo de agrupación, muy parecidas a lo que hace SAS.
library(dplyr)
d <- data.frame(state=rep(c('NY', 'CA'), c(10, 10)),
year=rep(1:10, 2),
response=c(rnorm(10), rnorm(10)))
fitted_models = d %>% group_by(state) %>% do(model = lm(response ~ year, data = .))
# Source: local data frame [2 x 2]
# Groups: <by row>
#
# state model
# (fctr) (chr)
# 1 CA <S3:lm>
# 2 NY <S3:lm>
fitted_models$model
# [[1]]
#
# Call:
# lm(formula = response ~ year, data = .)
#
# Coefficients:
# (Intercept) year
# -0.06354 0.02677
#
#
# [[2]]
#
# Call:
# lm(formula = response ~ year, data = .)
#
# Coefficients:
# (Intercept) year
# -0.35136 0.09385
Para recuperar los coeficientes y Rsquared / Valor PD, se puede usar el paquete broom
. Este paquete proporciona:
tres genéricos S3: ordenado, que resume un modelo de resultados estadísticos tales como coeficientes de una regresión; aumentar, lo que añade columnas a los datos originales, como predicciones, residuos y asignaciones en racimo; y la vista, la cual proporciona un resumen de una fila de estadísticas a nivel de modelo.
library(broom)
fitted_models %>% tidy(model)
# Source: local data frame [4 x 6]
# Groups: state [2]
#
# state term estimate std.error statistic p.value
# (fctr) (chr) (dbl) (dbl) (dbl) (dbl)
# 1 CA (Intercept) -0.06354035 0.83863054 -0.0757668 0.9414651
# 2 CA year 0.02677048 0.13515755 0.1980687 0.8479318
# 3 NY (Intercept) -0.35135766 0.60100314 -0.5846187 0.5749166
# 4 NY year 0.09385309 0.09686043 0.9689519 0.3609470
fitted_models %>% glance(model)
# Source: local data frame [2 x 12]
# Groups: state [2]
#
# state r.squared adj.r.squared sigma statistic p.value df
# (fctr) (dbl) (dbl) (dbl) (dbl) (dbl) (int)
# 1 CA 0.004879969 -0.119510035 1.2276294 0.0392312 0.8479318 2
# 2 NY 0.105032068 -0.006838924 0.8797785 0.9388678 0.3609470 2
# Variables not shown: logLik (dbl), AIC (dbl), BIC (dbl), deviance (dbl),
# df.residual (int)
fitted_models %>% augment(model)
# Source: local data frame [20 x 10]
# Groups: state [2]
#
# state response year .fitted .se.fit .resid .hat
# (fctr) (dbl) (int) (dbl) (dbl) (dbl) (dbl)
# 1 CA 0.4547765 1 -0.036769875 0.7215439 0.4915464 0.3454545
# 2 CA 0.1217003 2 -0.009999399 0.6119518 0.1316997 0.2484848
# 3 CA -0.6153836 3 0.016771076 0.5146646 -0.6321546 0.1757576
# 4 CA -0.9978060 4 0.043541551 0.4379605 -1.0413476 0.1272727
# 5 CA 2.1385614 5 0.070312027 0.3940486 2.0682494 0.1030303
# 6 CA -0.3924598 6 0.097082502 0.3940486 -0.4895423 0.1030303
# 7 CA -0.5918738 7 0.123852977 0.4379605 -0.7157268 0.1272727
# 8 CA 0.4671346 8 0.150623453 0.5146646 0.3165112 0.1757576
# 9 CA -1.4958726 9 0.177393928 0.6119518 -1.6732666 0.2484848
# 10 CA 1.7481956 10 0.204164404 0.7215439 1.5440312 0.3454545
# 11 NY -0.6285230 1 -0.257504572 0.5170932 -0.3710185 0.3454545
# 12 NY 1.0566099 2 -0.163651479 0.4385542 1.2202614 0.2484848
# 13 NY -0.5274693 3 -0.069798386 0.3688335 -0.4576709 0.1757576
# 14 NY 0.6097983 4 0.024054706 0.3138637 0.5857436 0.1272727
# 15 NY -1.5511940 5 0.117907799 0.2823942 -1.6691018 0.1030303
# 16 NY 0.7440243 6 0.211760892 0.2823942 0.5322634 0.1030303
# 17 NY 0.1054719 7 0.305613984 0.3138637 -0.2001421 0.1272727
# 18 NY 0.7513057 8 0.399467077 0.3688335 0.3518387 0.1757576
# 19 NY -0.1271655 9 0.493320170 0.4385542 -0.6204857 0.2484848
# 20 NY 1.2154852 10 0.587173262 0.5170932 0.6283119 0.3454545
# Variables not shown: .sigma (dbl), .cooksd (dbl), .std.resid (dbl)
En mi opinión es un modelo lineal mixto un mejor enfoque para este tipo de datos. El código de abajo da en el efecto fijo de la tendencia general. Los efectos aleatorios indican cómo la tendencia de cada estado individual difiere de la tendencia mundial. La estructura de correlación toma la autocorrelación temporal en cuenta. Echar un vistazo a Pinheiro y Bates (modelos de efectos mixtos en S y S-Plus).
library(nlme)
lme(response ~ year, random = ~year|state, correlation = corAR1(~year))
Una buena solución usando data.table
fue publicada aquí de validación cruzada por @Zach.
Yo acababa de añadir que es posible obtener de forma iterativa también el coeficiente de regresión r ^ 2:
## make fake data
library(data.table)
set.seed(1)
dat <- data.table(x=runif(100), y=runif(100), grp=rep(1:2,50))
##calculate the regression coefficient r^2
dat[,summary(lm(y~x))$r.squared,by=grp]
grp V1
1: 1 0.01465726
2: 2 0.02256595
así como toda la otra salida de summary(lm)
:
dat[,list(r2=summary(lm(y~x))$r.squared , f=summary(lm(y~x))$fstatistic[1] ),by=grp]
grp r2 f
1: 1 0.01465726 0.714014
2: 2 0.02256595 1.108173
## make fake data
ngroups <- 2
group <- 1:ngroups
nobs <- 100
dta <- data.frame(group=rep(group,each=nobs),y=rnorm(nobs*ngroups),x=runif(nobs*ngroups))
head(dta)
#--------------------
group y x
1 1 0.6482007 0.5429575
2 1 -0.4637118 0.7052843
3 1 -0.5129840 0.7312955
4 1 -0.6612649 0.9028034
5 1 -0.5197448 0.1661308
6 1 0.4240346 0.8944253
#------------
## function to extract the results of one model
foo <- function(z) {
## coef and se in a data frame
mr <- data.frame(coef(summary(lm(y~x,data=z))))
## put row names (predictors/indep variables)
mr$predictor <- rownames(mr)
mr
}
## see that it works
foo(subset(dta,group==1))
#=========
Estimate Std..Error t.value Pr...t.. predictor
(Intercept) 0.2176477 0.1919140 1.134090 0.2595235 (Intercept)
x -0.3669890 0.3321875 -1.104765 0.2719666 x
#----------
## one option: use command by
res <- by(dta,dta$group,foo)
res
#=========
dta$group: 1
Estimate Std..Error t.value Pr...t.. predictor
(Intercept) 0.2176477 0.1919140 1.134090 0.2595235 (Intercept)
x -0.3669890 0.3321875 -1.104765 0.2719666 x
------------------------------------------------------------
dta$group: 2
Estimate Std..Error t.value Pr...t.. predictor
(Intercept) -0.04039422 0.1682335 -0.2401081 0.8107480 (Intercept)
x 0.06286456 0.3020321 0.2081387 0.8355526 x
## using package plyr is better
library(plyr)
res <- ddply(dta,"group",foo)
res
#----------
group Estimate Std..Error t.value Pr...t.. predictor
1 1 0.21764767 0.1919140 1.1340897 0.2595235 (Intercept)
2 1 -0.36698898 0.3321875 -1.1047647 0.2719666 x
3 2 -0.04039422 0.1682335 -0.2401081 0.8107480 (Intercept)
4 2 0.06286456 0.3020321 0.2081387 0.8355526 x
Ahora mi respuesta llega un poco tarde, pero yo estaba buscando una funcionalidad similar. Al parecer, la función integrada 'por' en R también puede hacer el agrupar fácilmente:
por contiene el siguiente ejemplo, que se ajusta por grupo y extrae los coeficientes con sapply:?
require(stats)
## now suppose we want to extract the coefficients by group
tmp <- with(warpbreaks,
by(warpbreaks, tension,
function(x) lm(breaks ~ wool, data = x)))
sapply(tmp, coef)
Creo que vale la pena añadir el enfoque purrr::map
a este problema.
library(tidyverse)
d <- data.frame(state=rep(c('NY', 'CA'), c(10, 10)),
year=rep(1:10, 2),
response=c(rnorm(10), rnorm(10)))
d %>%
group_by(state) %>%
nest() %>%
mutate(model = map(data, ~lm(response ~ year, data = .)))
Véase la respuesta de @ Pablo Hiemstra para más ideas sobre cómo utilizar el paquete de broom
con estos resultados.
La función lm()
anterior es un ejemplo simple. Por cierto, me imagino que su base de datos tiene las columnas como en la forma siguiente:
Estado var1 var2 años y ...
En mi punto de vista, se puede utilizar el siguiente código:
require(base)
library(base)
attach(data) # data = your data base
#state is your label for the states column
modell<-by(data, data$state, function(data) lm(y~I(1/var1)+I(1/var2)))
summary(modell)
La cuestión parece ser sobre cómo llamar a funciones de regresión con fórmulas que son modificados dentro de un bucle.
Aquí es cómo puede hacerlo en (usando diamantes de conjunto de datos):
attach(ggplot2::diamonds)
strCols = names(ggplot2::diamonds)
formula <- list(); model <- list()
for (i in 1:1) {
formula[[i]] = paste0(strCols[7], " ~ ", strCols[7+i])
model[[i]] = glm(formula[[i]])
#then you can plot the results or anything else ...
png(filename = sprintf("diamonds_price=glm(%s).png", strCols[7+i]))
par(mfrow = c(2, 2))
plot(model[[i]])
dev.off()
}