Où puis-je trouver un programme de test de codes à barres Epson «ESC / POS»?
-
08-07-2019 - |
Question
Je ne parviens pas à obtenir un compte Epson "ESC / POS". imprimante pour imprimer des codes à barres (à l’aide de Delphi) et souhaitez vérifier si l’imprimante n’est pas défectueuse. Savez-vous où je peux trouver un programme pour imprimer un code à barres dans "ESC / POS"? Je suppose qu'en dernier recours, un programme OPOS sera également acceptable.
En outre, un programme de démonstration Delphi qui fonctionne sera également utile. Tous les extraits de Delphi que j'ai jusqu'à présent ne fonctionnent pas.
L’imprimante que j’utilise est une Epson TM-L60II
La solution
J'ai un programme de tests complet écrit dans Delphi 5 pour le TMT88, mais la source est un peu grosse pour ici, donc voici les bits de code à barres
Veuillez noter que certains extraits de vars / fonctions peuvent être manquants dans l'extrait de l'objet complet
Pour obtenir les caractères de code à barres
{**
* @param a ean13 barcode numeric value
* @return the escpos code for the barcode print
* Description uses escpos code, return code needed to print a ean13 barcode
*}
function TPrintEscPosToPort.getBarcodeEscPosCode(l_ean13:String):String;
var
l_return:String;
begin
l_return := CHR(29) + 'k' + CHR(67) + CHR(12);
l_return := l_return + l_ean13; // Print bar code
l_return := l_return + l_ean13; // Print bar code number under thge barcode
Result := l_return
end;
pour imprimer sur une imprimante
{**
* @param Printer Name, Item be printed, Cut the papers after the cut, #no of copies to print
* @return boolen, true if it printed
* Description prints a test page to the tysso printer
*}
function TPrintEscPosToPort.escPosPrint(const l_printer, l_textToPrint :String;l_cutPaper:Boolean=true;l_copies:integer=1): Boolean;
var
l_pPort,l_pName,l_tmp:String;
i,x:integer;
PrinterFile: TextFile;
begin
// set result to false so any thing other then a good print will be false
Result:= FALSE;
try
//Find if the printer exists, else set to defult -1
i := Printer.Printers.IndexOf(l_printer);
if (i > -1) then
begin
Printer.PrinterIndex := i;
l_pName := Printer.Printers[i]; //Get the printer name (incase its the defult and not the one passed)
l_pPort := Self.getPrinterPort(l_pName) ; // get the port name from the reg
end;
// If true add headers and footers to the passed text
if (Self.aPrintHeadersFooters) then
begin
l_tmp := Self.getHeader()
+ l_textToPrint + Self.GetFooter();
end
else
begin
l_tmp := l_textToPrint;
end;
//Send the Document To the printer
try
for x:= 1 to l_copies do //Print multi-copies
Begin
//Assign the file to a tmp file in the printer port
if (length(trim(l_pPort)) > 0) then AssignFile(PrinterFile,l_pPort)
else
begin
//only use if we cant get the port
//(may look bad as ctrl codes are still in place)
AssignPrn(PrinterFile);
l_tmp := Self.stripEscPos(l_tmp);
end;
Rewrite(PrinterFile);
try
//Send the passed Text to the printer
WriteLn(PrinterFile,l_tmp);
if (Self.aPrinterReset) then
WriteLn(PrinterFile,escReset); // Reset the printer alignment
if (l_cutPaper) then
WriteLn(PrinterFile,escFeedAndCut); //Cut the paper if needed
finally
CloseFile(PrinterFile);
Result:= true;
end;
end;
except
end;
except
end;
end;
Mettre à jour
Voici une perte de constantes de code de contrôle provenant du code ci-dessus, espérons que les noms soient suffisamment descriptifs.
const
escNewLine = chr(10); // New line (LF line feed)
escUnerlineOn = chr(27) + chr(45) + chr(1); // Unerline On
escUnerlineOnx2 = chr(27) + chr(45) + chr(2); // Unerline On x 2
escUnerlineOff = chr(27) + chr(45) + chr(0); // Unerline Off
escBoldOn = chr(27) + chr(69) + chr(1); // Bold On
escBoldOff = chr(27) + chr(69) + chr(0); // Bold Off
escNegativeOn = chr(29) + chr(66) + chr(1); // White On Black On'
escNegativeOff = chr(29) + chr(66) + chr(0); // White On Black Off
esc8CpiOn = chr(29) + chr(33) + chr(16); // Font Size x2 On
esc8CpiOff = chr(29) + chr(33) + chr(0); // Font Size x2 Off
esc16Cpi = chr(27) + chr(77) + chr(48); // Font A - Normal Font
esc20Cpi = chr(27) + chr(77) + chr(49); // Font B - Small Font
escReset = chr(27) + chr(64); //chr(27) + chr(77) + chr(48); // Reset Printer
escFeedAndCut = chr(29) + chr(86) + chr(65); // Partial Cut and feed
escAlignLeft = chr(27) + chr(97) + chr(48); // Align Text to the Left
escAlignCenter = chr(27) + chr(97) + chr(49); // Align Text to the Center
escAlignRight = chr(27) + chr(97) + chr(50); // Align Text to the Right
Autres conseils
Obtenez le POS Microsoft. Pour .Net 1.11, il possède un SDK qui inclut un exemple d’application qui effectue toutes les opérations de base sur le matériel du point de vente. Je l'utilise tout le temps pour vérifier que les tiroirs-caisses fonctionnent bien, par exemple.
Un code source est également inclus (en .Net) pour que vous puissiez voir comment ils le font.