Android: Comment faire une pause et reprendre un compte à rebours?

Question

J'ai développé un compte à rebours et je ne suis pas sûr de savoir comment mettre en pause et reprendre la minuterie comme le textview pour la minuterie est en cours cliqué. Cliquez pour démarrer puis cliquez à nouveau pour faire une pause et de reprendre, cliquez à nouveau l'affichage du texte de la minuterie.

Ceci est mon code:

    Timer = (TextView) this.findViewById(R.id.time); //TIMER  
    Timer.setOnClickListener(TimerClickListener);
    counter = new MyCount(600000, 1000);
}//end of create 

private OnClickListener TimerClickListener = new OnClickListener() {
    public void onClick(View v) {
        updateTimeTask();
    }

    private void updateTimeTask() {
        if (decision == 0) {
            counter.start();
            decision = 1;
        } else if (decision == 2) {
            counter.onResume1();
            decision = 1;
        } else {
            counter.onPause1();
            decision = 2;
        }//end if  
    }

    ;
};

class MyCount extends CountDownTimer {
    public MyCount(long millisInFuture, long countDownInterval) {
        super(millisInFuture, countDownInterval);
    }//MyCount  

    public void onResume1() {
        onResume();
    }

    public void onPause1() {
        onPause();
    }

    public void onFinish() {
        Timer.setText("00:00");
        p1++;
        if (p1 <= 4) {
            TextView PScore = (TextView) findViewById(R.id.pscore);
            PScore.setText(p1 + "");
        }//end if  
    }//finish  

    public void onTick(long millisUntilFinished) {
        Integer milisec = new Integer(new Double(millisUntilFinished).intValue());
        Integer cd_secs = milisec / 1000;

        Integer minutes = (cd_secs % 3600) / 60;
        Integer seconds = (cd_secs % 3600) % 60;

        Timer.setText(String.format("%02d", minutes) + ":"
                + String.format("%02d", seconds));
        ///long timeLeft = millisUntilFinished / 1000;  
        /}//on tick  
}//class MyCount  

protected void onResume() {
    super.onResume();
    //handler.removeCallbacks(updateTimeTask);  
    //handler.postDelayed(updateTimeTask, 1000);  
}//onResume  

@Override
protected void onPause() {
    super.onPause();
    //do stuff  
}//onPause  

Answer 1

/*
 * Copyright (C) 2010 Andrew Gainer
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

// Adapted from Android's CountDownTimer class

package com.cycleindex.multitimer;

import android.os.Handler;
import android.os.Message;
import android.os.SystemClock;

/**
 * Schedule a countdown until a time in the future, with
 * regular notifications on intervals along the way.
 *
  * The calls to {@link #onTick(long)} are synchronized to this object so that
 * one call to {@link #onTick(long)} won't ever occur before the previous
 * callback is complete.  This is only relevant when the implementation of
 * {@link #onTick(long)} takes an amount of time to execute that is significant
 * compared to the countdown interval.
 */
public abstract class CountDownTimerWithPause {

    /**
     * Millis since boot when alarm should stop.
     */
  private long mStopTimeInFuture;

  /**
   * Real time remaining until timer completes
   */
    private long mMillisInFuture;

    /**
     * Total time on timer at start
     */
    private final long mTotalCountdown;

    /**
     * The interval in millis that the user receives callbacks
     */
    private final long mCountdownInterval;

    /**
     * The time remaining on the timer when it was paused, if it is currently paused; 0 otherwise.
     */
    private long mPauseTimeRemaining;

    /**
     * True if timer was started running, false if not.
     */
    private boolean mRunAtStart;

    /**
     * @param millisInFuture The number of millis in the future from the call
     *   to {@link #start} until the countdown is done and {@link #onFinish()}
     *   is called
     * @param countDownInterval The interval in millis at which to execute
     *   {@link #onTick(millisUntilFinished)} callbacks
     * @param runAtStart True if timer should start running, false if not
     */
    public CountDownTimerWithPause(long millisOnTimer, long countDownInterval, boolean runAtStart) {
        mMillisInFuture = millisOnTimer;
        mTotalCountdown = mMillisInFuture;
        mCountdownInterval = countDownInterval;
        mRunAtStart = runAtStart;
    }

    /**
     * Cancel the countdown and clears all remaining messages
     */
    public final void cancel() {
        mHandler.removeMessages(MSG);
    }

    /**
     * Create the timer object.
     */
    public synchronized final CountDownTimerWithPause create() {
        if (mMillisInFuture <= 0) {
            onFinish();
        } else {
          mPauseTimeRemaining = mMillisInFuture;
        }

        if (mRunAtStart) {
          resume();
        }

        return this;
    }

    /**
     * Pauses the counter.
     */
  public void pause () {
    if (isRunning()) {
      mPauseTimeRemaining = timeLeft();
      cancel();
    }
  }

  /**
   * Resumes the counter.
   */
  public void resume () {
    if (isPaused()) {
      mMillisInFuture = mPauseTimeRemaining;
      mStopTimeInFuture = SystemClock.elapsedRealtime() + mMillisInFuture;
          mHandler.sendMessage(mHandler.obtainMessage(MSG));
      mPauseTimeRemaining = 0;
    }
  }

  /**
   * Tests whether the timer is paused.
   * @return true if the timer is currently paused, false otherwise.
   */
  public boolean isPaused () {
    return (mPauseTimeRemaining > 0);
  }

  /**
   * Tests whether the timer is running. (Performs logical negation on {@link #isPaused()})
   * @return true if the timer is currently running, false otherwise.
   */
  public boolean isRunning() {
    return (! isPaused());
  }

  /**
   * Returns the number of milliseconds remaining until the timer is finished
   * @return number of milliseconds remaining until the timer is finished
   */
  public long timeLeft() {
    long millisUntilFinished;
    if (isPaused()) {
      millisUntilFinished = mPauseTimeRemaining;
    } else {
      millisUntilFinished = mStopTimeInFuture - SystemClock.elapsedRealtime();
      if (millisUntilFinished < 0) millisUntilFinished = 0;
    }
    return millisUntilFinished;
  }

  /**
   * Returns the number of milliseconds in total that the timer was set to run
   * @return number of milliseconds timer was set to run
   */
  public long totalCountdown() {
    return mTotalCountdown;
  }

  /**
   * Returns the number of milliseconds that have elapsed on the timer.
   * @return the number of milliseconds that have elapsed on the timer.
   */
  public long timePassed() {
    return mTotalCountdown - timeLeft();
  }

  /**
   * Returns true if the timer has been started, false otherwise.
   * @return true if the timer has been started, false otherwise.
   */
  public boolean hasBeenStarted() {
    return (mPauseTimeRemaining <= mMillisInFuture);
  }

    /**
     * Callback fired on regular interval
     * @param millisUntilFinished The amount of time until finished
     */
    public abstract void onTick(long millisUntilFinished);

    /**
     * Callback fired when the time is up.
     */
    public abstract void onFinish();


    private static final int MSG = 1;


    // handles counting down
    private Handler mHandler = new Handler() {

        @Override
        public void handleMessage(Message msg) {

            synchronized (CountDownTimerWithPause.this) {
                long millisLeft = timeLeft();

                if (millisLeft <= 0) {
                    cancel();
                  onFinish();
                } else if (millisLeft < mCountdownInterval) {
                    // no tick, just delay until done
                    sendMessageDelayed(obtainMessage(MSG), millisLeft);
                } else {
                    long lastTickStart = SystemClock.elapsedRealtime();
                    onTick(millisLeft);

                    // take into account user's onTick taking time to execute
                    long delay = mCountdownInterval - (SystemClock.elapsedRealtime() - lastTickStart);

                    // special case: user's onTick took more than mCountdownInterval to
                    // complete, skip to next interval
                    while (delay < 0) delay += mCountdownInterval;

                    sendMessageDelayed(obtainMessage(MSG), delay);
                }
            }
        }
    };
}

Source:. Ce Gist

Answer 2

Une belle façon simple et créer une pause / reprise pour votre CountDownTimer est de créer une méthode distincte pour votre minuterie start , pause et CV comme suit:

public void timerStart(long timeLengthMilli) {
        timer = new CountDownTimer(timeLengthMilli, 1000) {

            @Override
            public void onTick(long milliTillFinish) {
                milliLeft=milliTillFinish;
                min = (milliTillFinish/(1000*60));
                sec = ((milliTillFinish/1000)-min*60);
                clock.setText(Long.toString(min)+":"+Long.toString(sec));
                Log.i("Tick", "Tock");
            }
         }
         timer.start();

Le timerStart a un paramètre tant qu'elle sera réutilisée par le CV () méthode ci-dessous. Rappelez-vous de stocker votre milliTillFinished (ci-dessus milliLeft) afin que vous puissiez l'envoyer par dans votre méthode CV () . Modes de pause et reprise ci-dessous, respectivement:

public void timerPause() {
        timer.cancel();
    }

    private void timerResume() {
        Log.i("min", Long.toString(min));
        Log.i("Sec", Long.toString(sec));
        timerStart(milliLeft);
    }

Voici le code pour le bouton FYI:

startPause.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View view) {
                if(startPause.getText().equals("Start")){
                    Log.i("Started", startPause.getText().toString());
                    startPause.setText("Pause");
                    timerStart(15*1000);
                } else if (startPause.getText().equals("Pause")){
                    Log.i("Paused", startPause.getText().toString());
                    startPause.setText("Resume");
                    timerPause();
                } else if (startPause.getText().equals("Resume")){
                    startPause.setText("Pause");
                    timerResume();
                }

Answer 3

Eh bien il n'y a pas d'API pour mettre en pause ou reprendre. Ce que vous devez faire est cancel() la minuterie et stocker le temps restant dans une variable. Lorsque le bouton de reprise est à nouveau frappé, redémarrez le chronomètre avec la valeur de la variable.

---

Vous savez chronomètres peut être vous intéresser.

Answer 4

Vous pouvez essayer d'utiliser une bibliothèque que j'ai créé, Hourglass

Hourglass hourglass = new Hourglass(50000, 1000) {
        @Override
        public void onTimerTick(long timeRemaining) {
            // Update UI
            Toast.show(MainActivity.this, String.valueOf(timeRemaining), Toast.LENGTH_SHORT).show();
        }

        @Override
        public void onTimerFinish() {
            // Timer finished
            Toast.show(MainActivity.this, "Timer finished", Toast.LENGTH_SHORT).show();


        }
    };

Utilisez hourglass.startTimer(); pour démarrer la minuterie.

Il a des méthodes auxiliaires qui permettent de faire une pause et de reprendre la minuterie.

hourglass.pauseTimer();

hourglass.resumeTimer();

Answer 5

J'ai une solution simple. Tout ce que vous avez à faire est d'ajouter une variable supplémentaire qui stocke l'heure actuelle. La seule addition est currentMillis en haut et en onTick (). Utilisez cancel () pour faire une pause.
PS: J'utilise la bibliothèque Butterknife, il est utilisé pour éviter d'utiliser findViewById et setonclicklisteners. Si vous ne voulez pas l'utiliser, il vous suffit d'utiliser la méthode de base de la mise en écoute et findViewById.

@BindView(R.id.play_btn) ImageButton play;
@BindView(R.id.pause_btn) ImageButton pause;
@BindView(R.id.close_btn) ImageButton close;
@BindView(R.id.time) TextView time;
private CountDownTimer countDownTimer;
private long currentMillis=10;


@Override
protected void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.activity_game);
    ButterKnife.bind(this);
}

@OnClick(R.id.play_btn) void play_game(){
    this.play();
}

@OnClick(R.id.pause_btn) void pause_game(){
    this.pause();
}

@OnClick(R.id.close_btn) void close_game(){
    this.close();
}

void play(){
    play.setVisibility(View.GONE);
    close.setVisibility(View.GONE);
    pause.setVisibility(View.VISIBLE);

    time.setText(""+currentMillis);
    countDownTimer = new CountDownTimer(currentMillis*1000,1000) {

        @Override
        public void onTick(long millisUntilFinish) {
            currentMillis=millisUntilFinish/1000;
            time.setText(""+millisUntilFinish/1000);
        }

        @Override
        public void onFinish() {
            time.setText("Done!");
        }
    };

    countDownTimer.start();
}

void pause(){
    play.setVisibility(View.VISIBLE);
    close.setVisibility(View.VISIBLE);
    pause.setVisibility(View.GONE);
    countDownTimer.cancel();
}

void close(){
    if(countDownTimer!=null){
        countDownTimer.cancel();
        countDownTimer=null;
    }
    Intent intent = new Intent(this,MainActivity.class);
    startActivity(intent);
}

}

Answer 6

    public static void setTimerMillis(Context context, long millis)
 { SharedPreferences sp = 
context.getSharedPreferences(SessionManager.FILE_USER, Context.MODE_PRIVATE); 
SharedPreferences.Editor spe = sp.edit(); spe.putLong(SessionManager.TIMER_MILLIS, millis); spe.apply(); }



       void setExamTimer() {
            setTimerColors();
            final long maxTimeToShow = 60000;            //testing
            final long lastTimeinMillisLeftSaved = TestyBookHelper.getTimerMillis(context); //take saved value from sharedpref
            final long intervalTime = 1000;
            donut_exam_timer.setMax((int) maxTimeToShow);
            CountDownTimer countDownTimer = new CountDownTimer(lastTimeinMillisLeftSaved, intervalTime) {
                @Override
                public void onTick(long millis) {
                    TestyBookHelper.setTimerMillis(context, millis);
                    String hms = String.format("%02d:%02d:%02d", TimeUnit.MILLISECONDS.toHours(millis),
                            TimeUnit.MILLISECONDS.toMinutes(millis) - TimeUnit.HOURS.toMinutes(TimeUnit.MILLISECONDS.toHours(millis)),
                            TimeUnit.MILLISECONDS.toSeconds(millis) - TimeUnit.MINUTES.toSeconds(TimeUnit.MILLISECONDS.toMinutes(millis)));               System.out.println(hms);
                    donut_exam_timer.setText(hms);
                    donut_exam_timer.setProgress(millis);
                }
                @Override
                public void onFinish() {
                }
            };
            countDownTimer.start();
        }

  public static long getTimerMillis(Context context) {
    SharedPreferences sp = context.getSharedPreferences(SessionManager.FILE_USER, Context.MODE_PRIVATE);
    return sp.getLong(SessionManager.TIMER_MILLIS, 60000L);}