Copier les données de classeur fermé basé sur le chemin défini par l'utilisateur variables
-
26-10-2019 - |
Question
J'ai épuisé mes capacités de recherche à la recherche d'une solution à cela. Voici un aperçu de ce que je voudrais faire:
- L'utilisateur ouvre le fichier Excel macros
- affiche invite immédiat pour l'utilisateur d'entrer ou de sélectionner le chemin du fichier de classeurs souhaités. Ils devront sélectionner deux fichiers, et les noms de fichiers ne peuvent pas être compatibles
- Après avoir entré les emplacements de fichiers, la première feuille de la première sélection de fichier sera copié sur la première feuille du classeur activé macro, et la première feuille de la deuxième sélection de fichier sera copié à la deuxième feuille de la macro classeur -Enabled.
Je suis venu à travers quelques références à ADO, mais je ne suis vraiment pas au courant encore.
Edit: J'ai trouvé un code à des données d'importation d'un fichier fermé. Je vais devoir modifier la plage pour retourner les résultats variables.
Private Function GetValue(path, file, sheet, ref)
path = "C:\Users\crathbun\Desktop"
file = "test.xlsx"
sheet = "Sheet1"
ref = "A1:R30"
' Retrieves a value from a closed workbook
Dim arg As String
' Make sure the file exists
If Right(path, 1) <> "\" Then path = path & "\"
If Dir(path & file) = "" Then
GetValue = "File Not Found"
Exit Function
End If
' Create the argument
arg = "'" & path & "[" & file & "]" & sheet & "'!" & _
Range(ref).Range("A1").Address(, , xlR1C1)
' Execute an XLM macro
GetValue = ExecuteExcel4Macro(arg)
End Function
Sub TestGetValue()
path = "C:\Users\crathbun\Desktop"
file = "test"
sheet = "Sheet1"
Application.ScreenUpdating = False
For r = 1 To 30
For C = 1 To 18
a = Cells(r, C).Address
Cells(r, C) = GetValue(path, file, sheet, a)
Next C
Next r
Application.ScreenUpdating = True
End Sub
Maintenant, je besoin d'un bouton de commande ou userform qui l'utilisateur invite immédiatement à définir un chemin de fichier et importer les données de ce fichier.
La solution
Je ne me dérange pas si les fichiers sont ouverts au cours du processus. Je ne voulais pas que l'utilisateur d'avoir à ouvrir les fichiers individuellement. J'ai juste besoin qu'ils soient en mesure de sélectionner ou accéder aux fichiers souhaités
Voici un code de base. Ce code demande à l'utilisateur de sélectionner deux fichiers et importe alors la feuille correspondante dans le classeur en cours. J'ai donné deux options. Faites votre choix:)
ÉPROUVÉ
1 (importer les feuilles directement au lieu de la copie dans sheet1 et 2)
Option Explicit
Sub Sample()
Dim wb1 As Workbook, wb2 As Workbook
Dim Ret1, Ret2
Set wb1 = ActiveWorkbook
'~~> Get the first File
Ret1 = Application.GetOpenFilename("Excel Files (*.xls*), *.xls*", _
, "Please select first file")
If Ret1 = False Then Exit Sub
'~~> Get the 2nd File
Ret2 = Application.GetOpenFilename("Excel Files (*.xls*), *.xls*", _
, "Please select Second file")
If Ret2 = False Then Exit Sub
Set wb2 = Workbooks.Open(Ret1)
wb2.Sheets(1).Copy Before:=wb1.Sheets(1)
ActiveSheet.Name = "Blah Blah 1"
wb2.Close SaveChanges:=False
Set wb2 = Workbooks.Open(Ret2)
wb2.Sheets(1).Copy After:=wb1.Sheets(1)
ActiveSheet.Name = "Blah Blah 2"
wb2.Close SaveChanges:=False
Set wb2 = Nothing
Set wb1 = Nothing
End Sub
2 (importer le contenu des feuilles en sheet1 et 2)
Option Explicit
Sub Sample()
Dim wb1 As Workbook, wb2 As Workbook
Dim Ret1, Ret2
Set wb1 = ActiveWorkbook
'~~> Get the first File
Ret1 = Application.GetOpenFilename("Excel Files (*.xls*), *.xls*", _
, "Please select first file")
If Ret1 = False Then Exit Sub
'~~> Get the 2nd File
Ret2 = Application.GetOpenFilename("Excel Files (*.xls*), *.xls*", _
, "Please select Second file")
If Ret2 = False Then Exit Sub
Set wb2 = Workbooks.Open(Ret1)
wb2.Sheets(1).Cells.Copy wb1.Sheets(1).Cells
wb2.Close SaveChanges:=False
Set wb2 = Workbooks.Open(Ret2)
wb2.Sheets(1).Cells.Copy wb1.Sheets(2).Cells
wb2.Close SaveChanges:=False
Set wb2 = Nothing
Set wb1 = Nothing
End Sub
Autres conseils
La fonction ci-dessous lit les données à partir d'un fichier Excel fermé et renvoie le résultat dans un tableau. Il perd le formatage, formules, etc. Vous pouvez appeler la fonction isArrayEmpty (en bas) dans votre code principal pour vérifier que la fonction quelque chose retourné.
Public Function getDataFromClosedExcelFile(parExcelFileName As String, parSheetName As String) As Variant
'see http://www.ozgrid.com/forum/showthread.php?t=19559
'returns an array (1 to nRows, 1 to nCols) which should be tested with isArrayEmpty in the calling function
Dim locConnection As New ADODB.Connection
Dim locRst As New ADODB.Recordset
Dim locConnectionString As String
Dim locQuery As String
Dim locCols As Variant
Dim locResult As Variant
Dim i As Long
Dim j As Long
On Error GoTo error_handler
locConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;" _
& "Data Source=" & parExcelFileName & ";" _
& "Extended Properties=""Excel 8.0;HDR=YES"";"
locQuery = "SELECT * FROM [" & parSheetName & "$]"
locConnection.Open ConnectionString:=locConnectionString
locRst.Open Source:=locQuery, ActiveConnection:=locConnection
If locRst.EOF Then 'Empty sheet or only one row
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'''''' FIX: an empty sheet returns "F1"
'''''' http://support.microsoft.com/kb/318373
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
If locRst.Fields.Count = 1 And locRst.Fields(0).Name = "F1" Then Exit Function 'Empty sheet
ReDim locResult(1 To 1, 1 To locRst.Fields.Count) As Variant
For i = 1 To locRst.Fields.Count
locResult(1, i) = locRst.Fields(i - 1).Name
Next i
Else
locCols = locRst.GetRows
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
'''''' FIX: an empty sheet returns "F1"
'''''' http://support.microsoft.com/kb/318373
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
If locRst.Fields.Count = 1 And locRst.Fields(0).Name = "F1" And UBound(locCols, 2) = 0 And locCols(0, 0) = "" Then Exit Function 'Empty sheet
ReDim locResult(1 To UBound(locCols, 2) + 2, 1 To UBound(locCols, 1) + 1) As Variant
If locRst.Fields.Count <> UBound(locCols, 1) + 1 Then Exit Function 'Not supposed to happen
For j = 1 To UBound(locResult, 2)
locResult(1, j) = locRst.Fields(j - 1).Name
Next j
For i = 2 To UBound(locResult, 1)
For j = 1 To UBound(locResult, 2)
locResult(i, j) = locCols(j - 1, i - 2)
Next j
Next i
End If
locRst.Close
locConnection.Close
Set locRst = Nothing
Set locConnection = Nothing
getDataFromClosedExcelFile = locResult
Exit Function
error_handler:
'Wrong file name, sheet name, or other errors...
'Errors (#N/A, etc) on the sheet should be replaced by Null but should not raise an error
If locRst.State = ADODB.adStateOpen Then locRst.Close
If locConnection.State = ADODB.adStateOpen Then locConnection.Close
Set locRst = Nothing
Set locConnection = Nothing
End Function
Public Function isArrayEmpty(parArray As Variant) As Boolean
'Returns false if not an array or dynamic array that has not been initialised (ReDim) or has been erased (Erase)
If IsArray(parArray) = False Then isArrayEmpty = True
On Error Resume Next
If UBound(parArray) < LBound(parArray) Then isArrayEmpty = True: Exit Function Else: isArrayEmpty = False
End Function
Utilisation de l'échantillon:
Sub test()
Dim data As Variant
data = getDataFromClosedExcelFile("myFile.xls", "Sheet1")
If Not isArrayEmpty(data) Then
'Copies content on active sheet
ActiveSheet.Cells(1,1).Resize(UBound(data,1), UBound(data,2)) = data
End If
End Sub