Raspberry Pi et externes MySQL

Question

J'ai suivi ce instructable: Web de Contrôle de la Raspberry Pi GPIO.

Il montre comment tourner les broches GPIO ou désactiver via une simple interface web.Fondamentalement, un fichier PHP mises à jour d'un local de base de données MySQL avec des informations sur les broches (on ou off) et un .sh fichier continusly lit la base de données pour voir si un code pin doit être allumé ou éteint.Ici est la .sh fichier:

# Script created by Daniel Curzon (http://www.instructables.com/member/drcurzon)
# Initial version created 10th June 2012
# Version: 1.0

###################################
#####  EDIT THESE BEFORE USE  #####
###################################
mysqlusername="USERNAME"
mysqlpassword="PASSWORD"

#############################################################################################################################
################################################### DO NOT EDIT BELOW THIS LINE ##############################################
##############################################################################################################################

#Set  Refresh
echo "How long do you want the wait time to be?          "
read waitTime

#Invoke GPIO
echo "4" > /sys/class/gpio/export
echo "17" > /sys/class/gpio/export
echo "18" > /sys/class/gpio/export
echo "21" > /sys/class/gpio/export
echo "22" > /sys/class/gpio/export
echo "23" > /sys/class/gpio/export
echo "24" > /sys/class/gpio/export
echo "25" > /sys/class/gpio/export

#Start Loop
while :
do
#Read MySQL Data
#Direction
direction4=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='4'";)
direction17=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='17'";)
direction18=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='18'";)
direction21=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='21'";)
direction22=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='22'";)
direction23=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='23'";)
direction24=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='24'";)
direction25=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinDirection FROM pinDirection WHERE pinNumber='25'";)
#Status
status4=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='4'";)
status17=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='17'";)
status18=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='18'";)
status21=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='21'";)
status22=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='22'";)
status23=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='23'";)
status24=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='24'";)
status25=$(mysql -B --disable-column-names --user=$mysqlusername --password=$mysqlpassword gpio -e "SELECT pinStatus FROM pinStatus WHERE pinNumber='25'";)

#Run Commands
if [ "$direction4" == "out" ]; then
    echo "out" > /sys/class/gpio/gpio4/direction
    if [ "$status4" == "1" ]; then
        echo "1" > /sys/class/gpio/gpio4/value
        echo "GPIO 4 Turned On"
    else
        echo "0" > /sys/class/gpio/gpio4/value
        echo "GPIO 4 Turned Off"
    fi
else
    echo "in" > /sys/class/gpio/gpio4/direction
fi
if [ "$direction17" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio17/direction
    if [ "$status17" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio17/value
                echo "GPIO 17 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio17/value
                echo "GPIO 17 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio17/direction
fi
if [ "$direction18" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio18/direction
    if [ "$status18" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio18/value
                echo "GPIO 18 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio18/value
                echo "GPIO 18 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio18/direction
fi
if [ "$direction21" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio21/direction
    if [ "$status21" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio21/value
                echo "GPIO 21 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio21/value
                echo "GPIO 21 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio21/direction
fi
if [ "$direction22" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio22/direction
    if [ "$status22" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio22/value
                echo "GPIO 22 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio22/value
                echo "GPIO 22 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio22/direction
fi
if [ "$direction23" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio23/direction
    if [ "$status23" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio23/value
                echo "GPIO 23 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio23/value
                echo "GPIO 23 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio23/direction
fi
if [ "$direction24" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio24/direction
    if [ "$status24" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio24/value
                echo "GPIO 24 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio24/value
                echo "GPIO 24 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio24/direction
fi
if [ "$direction25" == "out" ]; then
        echo "out" > /sys/class/gpio/gpio25/direction
    if [ "$status25" == "1" ]; then
                echo "1" > /sys/class/gpio/gpio25/value
                echo "GPIO 25 Turned On"
        else
                echo "0" > /sys/class/gpio/gpio25/value
                echo "GPIO 25 Turned Off"
        fi
else
        echo "in" > /sys/class/gpio/gpio25/direction
fi
#Complete Loop
sleep $waitTime
done

Je veux contrôler les GPIO en dehors de mon réseau, j'ai donc voulu télécharger la base de données à un serveur et de créer un site web pour le mettre à jour.Cependant, je n'ai aucune idée de comment accéder à un externe Base de données MySQL dans le .sh fichier!Comment puis-je le faire?

Answer 1

Vous pouvez dire à MySQL de l'accueil pour vous connecter à l'aide de la --host=<hostname> option.Vous devrez peut-être autoriser les connexions externes sur le serveur si.

Regarder http://linux.die.net/man/1/mysql pour plus de détails.Faites défiler jusqu'à "--host".