Unione multipla avanzata nella sottoquery tramite LINQ
Domanda
Ho passato il pomeriggio a cercare di capire come tradurre la seguente query in LINQ, ma non riesco proprio ad arrivarci.
declare @productId int; set @productId = 3212;
select * from InformationData data where productId = @productId and orgId = 1
and exists(
select id from (
select coalesce(id1.id, id2.id, id3.id) as id from (
select productId,attributeId from InformationData where productId = @productId group by productId,attributeId
) id
left outer join InformationData id1 on id1.productId = id.productId and id1.attributeId = id.attributeId and id1.language = 1
left outer join InformationData id2 on id2.productId = id.productId and id2.attributeId = id.attributeId and id2.language = 2
left outer join InformationData id3 on id3.productId = id.productId and id3.attributeId = id.attributeId and id3.language = 0
) row
where row.id = data.id
)
Lo scopo della query è recuperare i dati da una tabella utilizzando 2 lingue di fallback, quindi se i dati non esistono nella lingua 1, vengono recuperati nella lingua 2 e se 2 non esiste vengono recuperati per la lingua 0 che è una traduzione globale.
Posso ottenere la query interna per lo più corretta (tranne che da id1.language = 1, non riesco a farla partecipare a un membro del tavolo a cui mi sto unendo, qualche idea?)
Questo è il mio codice (codice LINQPad):
(
from data in (
from d in InformationData where d.ProductId == 3212 group d by new { d.ProductId, d.AttributeId } into p select new { ProductId = p.Key.ProductId, AttributeId = p.Key.AttributeId }
)
join x1 in InformationData on new { a = data.ProductId, b = data.AttributeId } equals new { a = x1.ProductId, b = x1.AttributeId } into f1
from r1 in f1.DefaultIfEmpty()
where r1.Language == 1
join x2 in InformationData on new { a = data.ProductId, b = data.AttributeId } equals new { a = x2.ProductId, b = x2.AttributeId } into f2
from r2 in f2.DefaultIfEmpty()
where r2.Language == 2
join x3 in InformationData on new { a = data.ProductId, b = data.AttributeId } equals new { a = x3.ProductId, b = x3.AttributeId } into f3
from r3 in f3.DefaultIfEmpty()
where r3.Language == 2
select new { Id = ((int?)r1.Id) ?? ((int?)r2.Id) ?? r3.Id }
).Dump();
Che genera il seguente SQL:
-- Region Parameters
DECLARE @p0 Int SET @p0 = 3212
DECLARE @p1 Int SET @p1 = 2
DECLARE @p2 Int SET @p2 = 2
DECLARE @p3 Int SET @p3 = 1
-- EndRegion
SELECT COALESCE([t2].[id],COALESCE([t3].[id],[t4].[id])) AS [Id]
FROM (
SELECT [t0].[productId], [t0].[attributeId]
FROM [InformationData] AS [t0]
WHERE [t0].[productId] = @p0
GROUP BY [t0].[productId], [t0].[attributeId]
) AS [t1]
LEFT OUTER JOIN [InformationData] AS [t2] ON ([t1].[productId] = [t2].[productId]) AND ([t1].[attributeId] = [t2].[attributeId])
LEFT OUTER JOIN [InformationData] AS [t3] ON ([t1].[productId] = [t3].[productId]) AND ([t1].[attributeId] = [t3].[attributeId])
LEFT OUTER JOIN [InformationData] AS [t4] ON ([t1].[productId] = [t4].[productId]) AND ([t1].[attributeId] = [t4].[attributeId])
WHERE ([t4].[language] = @p1) AND ([t3].[language] = @p2) AND ([t2].[language] = @p3)
Ma non riesco a metterlo insieme al resto della query, forse sono solo stanco di comprare, continuo a farlo fare un sacco di CROSS APPLY. Qualcuno ha qualche suggerimento?
Soluzione
Bene dopo una buona notte di sonno e alcune cose scricchiolanti sono diventate un po 'più luminose e ho trovato la soluzione :) Per chiunque sia curioso qui è
(
from i in InformationData
where (
from data in (
from d in InformationData where d.ProductId == 3212 group d by new { d.ProductId, d.AttributeId } into p select new { ProductId = p.Key.ProductId, AttributeId = p.Key.AttributeId }
)
join x1 in InformationData on new { a = data.ProductId, b = data.AttributeId, c = 1} equals new { a = x1.ProductId, b = x1.AttributeId, c = x1.Language } into f1
from r1 in f1.DefaultIfEmpty()
join x2 in InformationData on new { a = data.ProductId, b = data.AttributeId, c = 2 } equals new { a = x2.ProductId, b = x2.AttributeId, c = x2.Language } into f2
from r2 in f2.DefaultIfEmpty()
join x3 in InformationData on new { a = data.ProductId, b = data.AttributeId, c = 0 } equals new { a = x3.ProductId, b = x3.AttributeId, c = x3.Language } into f3
from r3 in f3.DefaultIfEmpty()
select new { Id = ((int?)r1.Id) ?? ((int?)r2.Id) ?? r3.Id }
).Any(d => d.Id == i.Id)
select i
).Dump();
Ed ecco l'SQL generato
-- Region Parameters
DECLARE @p0 Int SET @p0 = 3212
DECLARE @p1 Int SET @p1 = 1
DECLARE @p2 Int SET @p2 = 2
DECLARE @p3 Int SET @p3 = 0
-- EndRegion
SELECT [t0].[id] AS [Id], [t0].[attributeId] AS [AttributeId], [t0].[productId] AS [ProductId], [t0].[value] AS [Value], [t0].[orgId] AS [OrgId], [t0].[version] AS [Version], [t0].[language] AS [Language], [t0].[metaType] AS [MetaType], [t0].[overload] AS [Overload], [t0].[parentId] AS [ParentId]
FROM [InformationData] AS [t0]
WHERE EXISTS(
SELECT NULL AS [EMPTY]
FROM (
SELECT COALESCE([t3].[id],COALESCE([t4].[id],[t5].[id])) AS [value]
FROM (
SELECT [t1].[productId], [t1].[attributeId]
FROM [InformationData] AS [t1]
WHERE [t1].[productId] = @p0
GROUP BY [t1].[productId], [t1].[attributeId]
) AS [t2]
LEFT OUTER JOIN [InformationData] AS [t3] ON ([t2].[productId] = [t3].[productId]) AND ([t2].[attributeId] = [t3].[attributeId]) AND (@p1 = [t3].[language])
LEFT OUTER JOIN [InformationData] AS [t4] ON ([t2].[productId] = [t4].[productId]) AND ([t2].[attributeId] = [t4].[attributeId]) AND (@p2 = [t4].[language])
LEFT OUTER JOIN [InformationData] AS [t5] ON ([t2].[productId] = [t5].[productId]) AND ([t2].[attributeId] = [t5].[attributeId]) AND (@p3 = [t5].[language])
) AS [t6]
WHERE [t6].[value] = [t0].[id]
)
Altri suggerimenti
Basandomi principalmente sulla descrizione di ciò che la query dovrebbe fare, penso che potresti essere in grado di ottenere lo stesso risultato con l'appropriato "ordine di" clausola e recupero solo del primo risultato. In questo modo:
var result =
(
from d in InformationData
where d.ProductId == 3212
orderby ((d.language == 0) ? Int32.MaxValue : d.language)
select d
).First();
MODIFICA : puoi controllare la precedenza della ricerca estendendo la clausola orderby. Ad esempio, se la precedenza dovrebbe essere 2, quindi 3, quindi 1, quindi qualsiasi altra cosa, è possibile farlo:
var result =
(
from d in InformationData
where d.ProductId == 3212
orderby
(d.language == 2) ? 0
: (d.language == 3) ? 1
: (d.language == 1) ? 2
: Int32.MaxValue
select d
).First();