La distanza più breve tra un punto e un segmento di linea
https://stackoverflow.com/questions/849211
-
21-08-2019 - |
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
RussianDomanda
Ho bisogno di una funzione di base per trovare la distanza più breve tra un punto e un segmento di linea.Sentiti libero di scrivere la soluzione nella lingua che preferisci;Posso tradurlo in quello che sto usando (Javascript).
MODIFICARE:Il mio segmento di linea è definito da due punti finali.Quindi il mio segmento di linea AB è definito dai due punti A (x1,y1) E B (x2,y2).Sto cercando di trovare la distanza tra questo segmento di linea e un punto C (x3,y3).Le mie capacità di geometria sono arrugginite, quindi gli esempi che ho visto sono confusi, mi dispiace ammetterlo.
Soluzione
Eli, il codice che hai scelto non è corretto.Un punto vicino alla linea su cui giace il segmento ma lontano da un'estremità del segmento verrebbe giudicato erroneamente vicino al segmento. Aggiornamento:La risposta errata menzionata non è più quella accettata.
Ecco del codice corretto, in C++.Presuppone un vettore di classe 2D class vec2 {float x,y;}, essenzialmente, con operatori per aggiungere, sottrarre, scalare, ecc., e una funzione di distanza e prodotto scalare (cioè x1 x2 + y1 y2).
float minimum_distance(vec2 v, vec2 w, vec2 p) {
// Return minimum distance between line segment vw and point p
const float l2 = length_squared(v, w); // i.e. |w-v|^2 - avoid a sqrt
if (l2 == 0.0) return distance(p, v); // v == w case
// Consider the line extending the segment, parameterized as v + t (w - v).
// We find projection of point p onto the line.
// It falls where t = [(p-v) . (w-v)] / |w-v|^2
// We clamp t from [0,1] to handle points outside the segment vw.
const float t = max(0, min(1, dot(p - v, w - v) / l2));
const vec2 projection = v + t * (w - v); // Projection falls on the segment
return distance(p, projection);
}
MODIFICARE:Avevo bisogno di un'implementazione Javascript, quindi eccola qui, senza dipendenze (o commenti, ma è una conversione diretta di quanto sopra).I punti sono rappresentati come oggetti con x E y attributi.
function sqr(x) { return x * x }
function dist2(v, w) { return sqr(v.x - w.x) + sqr(v.y - w.y) }
function distToSegmentSquared(p, v, w) {
var l2 = dist2(v, w);
if (l2 == 0) return dist2(p, v);
var t = ((p.x - v.x) * (w.x - v.x) + (p.y - v.y) * (w.y - v.y)) / l2;
t = Math.max(0, Math.min(1, t));
return dist2(p, { x: v.x + t * (w.x - v.x),
y: v.y + t * (w.y - v.y) });
}
function distToSegment(p, v, w) { return Math.sqrt(distToSegmentSquared(p, v, w)); }
MODIFICA 2:Avevo bisogno di una versione Java, ma, cosa più importante, ne avevo bisogno in 3D anziché in 2D.
float dist_to_segment_squared(float px, float py, float pz, float lx1, float ly1, float lz1, float lx2, float ly2, float lz2) {
float line_dist = dist_sq(lx1, ly1, lz1, lx2, ly2, lz2);
if (line_dist == 0) return dist_sq(px, py, pz, lx1, ly1, lz1);
float t = ((px - lx1) * (lx2 - lx1) + (py - ly1) * (ly2 - ly1) + (pz - lz1) * (lz2 - lz1)) / line_dist;
t = constrain(t, 0, 1);
return dist_sq(px, py, pz, lx1 + t * (lx2 - lx1), ly1 + t * (ly2 - ly1), lz1 + t * (lz2 - lz1));
}
Altri suggerimenti
Ecco il codice completo più semplice in Javascript.
x, y è il vostro punto di destinazione e x1, y1 a x2, y2 è il vostro segmento di linea.
AGGIORNAMENTO: fissare per 0 lunghezza problema di linea dai commenti.
function pDistance(x, y, x1, y1, x2, y2) {
var A = x - x1;
var B = y - y1;
var C = x2 - x1;
var D = y2 - y1;
var dot = A * C + B * D;
var len_sq = C * C + D * D;
var param = -1;
if (len_sq != 0) //in case of 0 length line
param = dot / len_sq;
var xx, yy;
if (param < 0) {
xx = x1;
yy = y1;
}
else if (param > 1) {
xx = x2;
yy = y2;
}
else {
xx = x1 + param * C;
yy = y1 + param * D;
}
var dx = x - xx;
var dy = y - yy;
return Math.sqrt(dx * dx + dy * dy);
}
Questa è un'implementazione fatta per segmenti di linea finito, non le linee infinite come la maggior parte delle altre funzioni qui sembrano essere (è per questo che ho fatto questo).
Attuazione della teoria di Paul Bourke .
Python:
def dist(x1, y1, x2, y2, x3, y3): # x3,y3 is the point
px = x2-x1
py = y2-y1
norm = px*px + py*py
u = ((x3 - x1) * px + (y3 - y1) * py) / float(norm)
if u > 1:
u = 1
elif u < 0:
u = 0
x = x1 + u * px
y = y1 + u * py
dx = x - x3
dy = y - y3
# Note: If the actual distance does not matter,
# if you only want to compare what this function
# returns to other results of this function, you
# can just return the squared distance instead
# (i.e. remove the sqrt) to gain a little performance
dist = (dx*dx + dy*dy)**.5
return dist
AS3:
public static function segmentDistToPoint(segA:Point, segB:Point, p:Point):Number
{
var p2:Point = new Point(segB.x - segA.x, segB.y - segA.y);
var something:Number = p2.x*p2.x + p2.y*p2.y;
var u:Number = ((p.x - segA.x) * p2.x + (p.y - segA.y) * p2.y) / something;
if (u > 1)
u = 1;
else if (u < 0)
u = 0;
var x:Number = segA.x + u * p2.x;
var y:Number = segA.y + u * p2.y;
var dx:Number = x - p.x;
var dy:Number = y - p.y;
var dist:Number = Math.sqrt(dx*dx + dy*dy);
return dist;
}
Java
private double shortestDistance(float x1,float y1,float x2,float y2,float x3,float y3)
{
float px=x2-x1;
float py=y2-y1;
float temp=(px*px)+(py*py);
float u=((x3 - x1) * px + (y3 - y1) * py) / (temp);
if(u>1){
u=1;
}
else if(u<0){
u=0;
}
float x = x1 + u * px;
float y = y1 + u * py;
float dx = x - x3;
float dy = y - y3;
double dist = Math.sqrt(dx*dx + dy*dy);
return dist;
}
Nel mio filo domanda come calcolare la distanza più breve tra un punto 2D e un segmento di linea in tutti i casi in C, C # / .NET 2.0 o Java? mi è stato chiesto di mettere un C # risposta qui quando ho trovare uno: ecco che è, modificato da http: //www.topcoder. com / tc d1 = tutorial & d2 = forma geometrica 1 & module = statico :?
//Compute the dot product AB . BC
private double DotProduct(double[] pointA, double[] pointB, double[] pointC)
{
double[] AB = new double[2];
double[] BC = new double[2];
AB[0] = pointB[0] - pointA[0];
AB[1] = pointB[1] - pointA[1];
BC[0] = pointC[0] - pointB[0];
BC[1] = pointC[1] - pointB[1];
double dot = AB[0] * BC[0] + AB[1] * BC[1];
return dot;
}
//Compute the cross product AB x AC
private double CrossProduct(double[] pointA, double[] pointB, double[] pointC)
{
double[] AB = new double[2];
double[] AC = new double[2];
AB[0] = pointB[0] - pointA[0];
AB[1] = pointB[1] - pointA[1];
AC[0] = pointC[0] - pointA[0];
AC[1] = pointC[1] - pointA[1];
double cross = AB[0] * AC[1] - AB[1] * AC[0];
return cross;
}
//Compute the distance from A to B
double Distance(double[] pointA, double[] pointB)
{
double d1 = pointA[0] - pointB[0];
double d2 = pointA[1] - pointB[1];
return Math.Sqrt(d1 * d1 + d2 * d2);
}
//Compute the distance from AB to C
//if isSegment is true, AB is a segment, not a line.
double LineToPointDistance2D(double[] pointA, double[] pointB, double[] pointC,
bool isSegment)
{
double dist = CrossProduct(pointA, pointB, pointC) / Distance(pointA, pointB);
if (isSegment)
{
double dot1 = DotProduct(pointA, pointB, pointC);
if (dot1 > 0)
return Distance(pointB, pointC);
double dot2 = DotProduct(pointB, pointA, pointC);
if (dot2 > 0)
return Distance(pointA, pointC);
}
return Math.Abs(dist);
}
Sono @SO di non rispondere, ma porre domande quindi spero non ottengo milioni verso il basso numero di voti per alcuni motivi, ma critico la costruzione. Volevo solo (ed è stato incoraggiato) per condividere le idee di qualcun altro dal momento che le soluzioni in questa discussione sono o con qualche lingua esotica (Fortran, Mathematica) o contrassegnati come difettosi da qualcuno. L'unico utile (da Grumdrig) per me è scritto in C ++ e nessuno ha placcato è difettoso. Ma manca metodi (DOT, ecc) che vengono chiamati.
In F #, la distanza dal punto c al segmento linea tra a e b è dato da:
let pointToLineSegmentDistance (a: Vector, b: Vector) (c: Vector) =
let d = b - a
let s = d.Length
let lambda = (c - a) * d / s
let p = (lambda |> max 0.0 |> min s) * d / s
(a + p - c).Length
Il vettore d punti dal d/s al c-a lungo il segmento di linea. Il prodotto scalare di min con max dà il parametro del punto di massimo avvicinamento tra la linea infinita e il punto 0..s. Il a+p-c e <=> funzione sono utilizzati per bloccare questo parametro per la gamma <=> modo che il punto si trova tra <=> e <=>. Infine, la lunghezza del <=> è la distanza dalla <=> al punto più vicino sul segmento di linea.
uso Esempio:
pointToLineSegmentDistance (Vector(0.0, 0.0), Vector(1.0, 0.0)) (Vector(-1.0, 1.0))
In Mathematica
Si utilizza una descrizione parametrica del segmento, e proietta il punto nella linea definita dal segmento. Come parametro va da 0 a 1 nel segmento, se la proiezione è fuori questo limite, si calcola la distanza corrispondente enpoint, invece della retta normale al segmento.
Clear["Global`*"];
distance[{start_, end_}, pt_] :=
Module[{param},
param = ((pt - start).(end - start))/Norm[end - start]^2; (*parameter. the "."
here means vector product*)
Which[
param < 0, EuclideanDistance[start, pt], (*If outside bounds*)
param > 1, EuclideanDistance[end, pt],
True, EuclideanDistance[pt, start + param (end - start)] (*Normal distance*)
]
];
Tracciato risultato:
Plot3D[distance[{{0, 0}, {1, 0}}, {xp, yp}], {xp, -1, 2}, {yp, -1, 2}]
Trama quei punti più vicino di un distanza di cutoff :
Plot contorno:
Per chiunque sia interessato, ecco una conversione banale di codice Javascript di Joshua per Objective-C:
- (double)distanceToPoint:(CGPoint)p fromLineSegmentBetween:(CGPoint)l1 and:(CGPoint)l2
{
double A = p.x - l1.x;
double B = p.y - l1.y;
double C = l2.x - l1.x;
double D = l2.y - l1.y;
double dot = A * C + B * D;
double len_sq = C * C + D * D;
double param = dot / len_sq;
double xx, yy;
if (param < 0 || (l1.x == l2.x && l1.y == l2.y)) {
xx = l1.x;
yy = l1.y;
}
else if (param > 1) {
xx = l2.x;
yy = l2.y;
}
else {
xx = l1.x + param * C;
yy = l1.y + param * D;
}
double dx = p.x - xx;
double dy = p.y - yy;
return sqrtf(dx * dx + dy * dy);
}
Avevo bisogno di questa soluzione per lavorare con MKMapPoint quindi voglio condividere in caso qualcun altro ne ha bisogno. Solo qualche piccola modifica e questo restituirà la distanza in metri:
- (double)distanceToPoint:(MKMapPoint)p fromLineSegmentBetween:(MKMapPoint)l1 and:(MKMapPoint)l2
{
double A = p.x - l1.x;
double B = p.y - l1.y;
double C = l2.x - l1.x;
double D = l2.y - l1.y;
double dot = A * C + B * D;
double len_sq = C * C + D * D;
double param = dot / len_sq;
double xx, yy;
if (param < 0 || (l1.x == l2.x && l1.y == l2.y)) {
xx = l1.x;
yy = l1.y;
}
else if (param > 1) {
xx = l2.x;
yy = l2.y;
}
else {
xx = l1.x + param * C;
yy = l1.y + param * D;
}
return MKMetersBetweenMapPoints(p, MKMapPointMake(xx, yy));
}
Ehi, ho appena scritto questo ieri. E 'in ActionScript 3.0, che è fondamentalmente JavaScript, anche se si potrebbe non avere la stessa classe Point.
//st = start of line segment
//b = the line segment (as in: st + b = end of line segment)
//pt = point to test
//Returns distance from point to line segment.
//Note: nearest point on the segment to the test point is right there if we ever need it
public static function linePointDist( st:Point, b:Point, pt:Point ):Number
{
var nearestPt:Point; //closest point on seqment to pt
var keyDot:Number = dot( b, pt.subtract( st ) ); //key dot product
var bLenSq:Number = dot( b, b ); //Segment length squared
if( keyDot <= 0 ) //pt is "behind" st, use st
{
nearestPt = st
}
else if( keyDot >= bLenSq ) //pt is "past" end of segment, use end (notice we are saving twin sqrts here cuz)
{
nearestPt = st.add(b);
}
else //pt is inside segment, reuse keyDot and bLenSq to get percent of seqment to move in to find closest point
{
var keyDotToPctOfB:Number = keyDot/bLenSq; //REM dot product comes squared
var partOfB:Point = new Point( b.x * keyDotToPctOfB, b.y * keyDotToPctOfB );
nearestPt = st.add(partOfB);
}
var dist:Number = (pt.subtract(nearestPt)).length;
return dist;
}
Inoltre, c'è una discussione abbastanza completa e leggibile del problema qui: notejot.com
Per i più pigri, ecco la mia porta di Objective-C di @ soluzione Grumdrig sopra:
CGFloat sqr(CGFloat x) { return x*x; }
CGFloat dist2(CGPoint v, CGPoint w) { return sqr(v.x - w.x) + sqr(v.y - w.y); }
CGFloat distanceToSegmentSquared(CGPoint p, CGPoint v, CGPoint w)
{
CGFloat l2 = dist2(v, w);
if (l2 == 0.0f) return dist2(p, v);
CGFloat t = ((p.x - v.x) * (w.x - v.x) + (p.y - v.y) * (w.y - v.y)) / l2;
if (t < 0.0f) return dist2(p, v);
if (t > 1.0f) return dist2(p, w);
return dist2(p, CGPointMake(v.x + t * (w.x - v.x), v.y + t * (w.y - v.y)));
}
CGFloat distanceToSegment(CGPoint point, CGPoint segmentPointV, CGPoint segmentPointW)
{
return sqrtf(distanceToSegmentSquared(point, segmentPointV, segmentPointW));
}
Impossibile resistere codifica in Python :)
from math import sqrt, fabs
def pdis(a, b, c):
t = b[0]-a[0], b[1]-a[1] # Vector ab
dd = sqrt(t[0]**2+t[1]**2) # Length of ab
t = t[0]/dd, t[1]/dd # unit vector of ab
n = -t[1], t[0] # normal unit vector to ab
ac = c[0]-a[0], c[1]-a[1] # vector ac
return fabs(ac[0]*n[0]+ac[1]*n[1]) # Projection of ac to n (the minimum distance)
print pdis((1,1), (2,2), (2,0)) # Example (answer is 1.414)
Idem per fortran :)
real function pdis(a, b, c)
real, dimension(0:1), intent(in) :: a, b, c
real, dimension(0:1) :: t, n, ac
real :: dd
t = b - a ! Vector ab
dd = sqrt(t(0)**2+t(1)**2) ! Length of ab
t = t/dd ! unit vector of ab
n = (/-t(1), t(0)/) ! normal unit vector to ab
ac = c - a ! vector ac
pdis = abs(ac(0)*n(0)+ac(1)*n(1)) ! Projection of ac to n (the minimum distance)
end function pdis
program test
print *, pdis((/1.0,1.0/), (/2.0,2.0/), (/2.0,0.0/)) ! Example (answer is 1.414)
end program test
Ecco una grafia più completa di soluzioni di Grumdrig. Questa versione restituisce anche il punto in sé più vicino.
#include "stdio.h"
#include "math.h"
class Vec2
{
public:
float _x;
float _y;
Vec2()
{
_x = 0;
_y = 0;
}
Vec2( const float x, const float y )
{
_x = x;
_y = y;
}
Vec2 operator+( const Vec2 &v ) const
{
return Vec2( this->_x + v._x, this->_y + v._y );
}
Vec2 operator-( const Vec2 &v ) const
{
return Vec2( this->_x - v._x, this->_y - v._y );
}
Vec2 operator*( const float f ) const
{
return Vec2( this->_x * f, this->_y * f );
}
float DistanceToSquared( const Vec2 p ) const
{
const float dX = p._x - this->_x;
const float dY = p._y - this->_y;
return dX * dX + dY * dY;
}
float DistanceTo( const Vec2 p ) const
{
return sqrt( this->DistanceToSquared( p ) );
}
float DotProduct( const Vec2 p ) const
{
return this->_x * p._x + this->_y * p._y;
}
};
// return minimum distance between line segment vw and point p, and the closest point on the line segment, q
float DistanceFromLineSegmentToPoint( const Vec2 v, const Vec2 w, const Vec2 p, Vec2 * const q )
{
const float distSq = v.DistanceToSquared( w ); // i.e. |w-v|^2 ... avoid a sqrt
if ( distSq == 0.0 )
{
// v == w case
(*q) = v;
return v.DistanceTo( p );
}
// consider the line extending the segment, parameterized as v + t (w - v)
// we find projection of point p onto the line
// it falls where t = [(p-v) . (w-v)] / |w-v|^2
const float t = ( p - v ).DotProduct( w - v ) / distSq;
if ( t < 0.0 )
{
// beyond the v end of the segment
(*q) = v;
return v.DistanceTo( p );
}
else if ( t > 1.0 )
{
// beyond the w end of the segment
(*q) = w;
return w.DistanceTo( p );
}
// projection falls on the segment
const Vec2 projection = v + ( ( w - v ) * t );
(*q) = projection;
return p.DistanceTo( projection );
}
float DistanceFromLineSegmentToPoint( float segmentX1, float segmentY1, float segmentX2, float segmentY2, float pX, float pY, float *qX, float *qY )
{
Vec2 q;
float distance = DistanceFromLineSegmentToPoint( Vec2( segmentX1, segmentY1 ), Vec2( segmentX2, segmentY2 ), Vec2( pX, pY ), &q );
(*qX) = q._x;
(*qY) = q._y;
return distance;
}
void TestDistanceFromLineSegmentToPoint( float segmentX1, float segmentY1, float segmentX2, float segmentY2, float pX, float pY )
{
float qX;
float qY;
float d = DistanceFromLineSegmentToPoint( segmentX1, segmentY1, segmentX2, segmentY2, pX, pY, &qX, &qY );
printf( "line segment = ( ( %f, %f ), ( %f, %f ) ), p = ( %f, %f ), distance = %f, q = ( %f, %f )\n",
segmentX1, segmentY1, segmentX2, segmentY2, pX, pY, d, qX, qY );
}
void TestDistanceFromLineSegmentToPoint()
{
TestDistanceFromLineSegmentToPoint( 0, 0, 1, 1, 1, 0 );
TestDistanceFromLineSegmentToPoint( 0, 0, 20, 10, 5, 4 );
TestDistanceFromLineSegmentToPoint( 0, 0, 20, 10, 30, 15 );
TestDistanceFromLineSegmentToPoint( 0, 0, 20, 10, -30, 15 );
TestDistanceFromLineSegmentToPoint( 0, 0, 10, 0, 5, 1 );
TestDistanceFromLineSegmentToPoint( 0, 0, 0, 10, 1, 5 );
}
Consideriamo questa modifica alla risposta di Grumdrig sopra. Molte volte vi accorgerete che in virgola mobile imprecisione può causare problemi. Sto utilizzando raddoppia nella versione di seguito, ma è possibile modificare facilmente per carri. La parte importante è che usa un epsilon per gestire la "sbobba". Inoltre, avrete molte volte vogliono sapere dove l'incrocio è accaduto, o se è successo a tutti. Se il t restituito è <0,0 o> 1,0, si è verificata alcuna collisione. Tuttavia, anche se non si sono verificati collisione, molte volte si vorrà sapere dove il punto più vicino sul segmento a P è, e quindi io uso QX e QY restituire questo luogo.
double PointSegmentDistanceSquared( double px, double py,
double p1x, double p1y,
double p2x, double p2y,
double& t,
double& qx, double& qy)
{
static const double kMinSegmentLenSquared = 0.00000001; // adjust to suit. If you use float, you'll probably want something like 0.000001f
static const double kEpsilon = 1.0E-14; // adjust to suit. If you use floats, you'll probably want something like 1E-7f
double dx = p2x - p1x;
double dy = p2y - p1y;
double dp1x = px - p1x;
double dp1y = py - p1y;
const double segLenSquared = (dx * dx) + (dy * dy);
if (segLenSquared >= -kMinSegmentLenSquared && segLenSquared <= kMinSegmentLenSquared)
{
// segment is a point.
qx = p1x;
qy = p1y;
t = 0.0;
return ((dp1x * dp1x) + (dp1y * dp1y));
}
else
{
// Project a line from p to the segment [p1,p2]. By considering the line
// extending the segment, parameterized as p1 + (t * (p2 - p1)),
// we find projection of point p onto the line.
// It falls where t = [(p - p1) . (p2 - p1)] / |p2 - p1|^2
t = ((dp1x * dx) + (dp1y * dy)) / segLenSquared;
if (t < kEpsilon)
{
// intersects at or to the "left" of first segment vertex (p1x, p1y). If t is approximately 0.0, then
// intersection is at p1. If t is less than that, then there is no intersection (i.e. p is not within
// the 'bounds' of the segment)
if (t > -kEpsilon)
{
// intersects at 1st segment vertex
t = 0.0;
}
// set our 'intersection' point to p1.
qx = p1x;
qy = p1y;
// Note: If you wanted the ACTUAL intersection point of where the projected lines would intersect if
// we were doing PointLineDistanceSquared, then qx would be (p1x + (t * dx)) and qy would be (p1y + (t * dy)).
}
else if (t > (1.0 - kEpsilon))
{
// intersects at or to the "right" of second segment vertex (p2x, p2y). If t is approximately 1.0, then
// intersection is at p2. If t is greater than that, then there is no intersection (i.e. p is not within
// the 'bounds' of the segment)
if (t < (1.0 + kEpsilon))
{
// intersects at 2nd segment vertex
t = 1.0;
}
// set our 'intersection' point to p2.
qx = p2x;
qy = p2y;
// Note: If you wanted the ACTUAL intersection point of where the projected lines would intersect if
// we were doing PointLineDistanceSquared, then qx would be (p1x + (t * dx)) and qy would be (p1y + (t * dy)).
}
else
{
// The projection of the point to the point on the segment that is perpendicular succeeded and the point
// is 'within' the bounds of the segment. Set the intersection point as that projected point.
qx = p1x + (t * dx);
qy = p1y + (t * dy);
}
// return the squared distance from p to the intersection point. Note that we return the squared distance
// as an optimization because many times you just need to compare relative distances and the squared values
// works fine for that. If you want the ACTUAL distance, just take the square root of this value.
double dpqx = px - qx;
double dpqy = py - qy;
return ((dpqx * dpqx) + (dpqy * dpqy));
}
}
Una soluzione line utilizzando arctangents:
L'idea è di spostare A a (0, 0) e ruotare in senso orario per far triangolo C lay sull'asse X, Quando questo accade, da sarà la distanza.
- un angolo = Atan (Cy - Ay, Cx - Ax);
- angolo b = Atan (By - Ay, Bx - Ax);
- lunghezza AB = sqrt ((Bx - Ax) ^ 2 + (By - Ay) ^ 2)
- Per = Sin (Bangle - aAngle) * ABLength
C #
public double Distance(Point a, Point b, Point c)
{
// normalize points
Point cn = new Point(c.X - a.X, c.Y - a.Y);
Point bn = new Point(b.X - a.X, b.Y - a.Y);
double angle = Math.Atan2(bn.Y, bn.X) - Math.Atan2(cn.Y, cn.X);
double abLength = Math.Sqrt(bn.X*bn.X + bn.Y*bn.Y);
return Math.Sin(angle)*abLength;
}
Una linea C # (per essere convertito in SQL)
double distance = Math.Sin(Math.Atan2(b.Y - a.Y, b.X - a.X) - Math.Atan2(c.Y - a.Y, c.X - a.X)) * Math.Sqrt((b.X - a.X) * (b.X - a.X) + (b.Y - a.Y) * (b.Y - a.Y))
sto supponendo che si desidera trovare il più breve distanza tra il punto e un segmento di linea; per fare questo, è necessario trovare la linea (Linea), che è perpendicolare al segmento (lineB), che passa attraverso il vostro punto, determinare l'intersezione tra quella linea (Linea) e la linea che passa attraverso il vostro segmento di linea (lineB) ; se questo punto è tra i due punti del vostro segmento di linea, allora la distanza è la distanza tra il punto e il punto hai appena trovato, che è l'intersezione di Linea e lineB; se il punto non è tra i due punti del vostro segmento di linea, è necessario per ottenere la distanza tra il punto e il più vicino dei due estremità del segmento di linea; questo può essere fatto facilmente prendendo la distanza quadrato (per evitare una radice quadrata) tra il punto ed i due punti del segmento di linea; qualunque sia più vicina, prendere la radice quadrata di quello.
di Grumdrig C implementazione ++ / JavaScript è stato molto utile per me, così ho fornito una porta diretta Python che sto usando. Il codice completo è href="https://gist.github.com/irees/be5e56e7c9b16d78a351" qui .
class Point(object):
def __init__(self, x, y):
self.x = float(x)
self.y = float(y)
def square(x):
return x * x
def distance_squared(v, w):
return square(v.x - w.x) + square(v.y - w.y)
def distance_point_segment_squared(p, v, w):
# Segment length squared, |w-v|^2
d2 = distance_squared(v, w)
if d2 == 0:
# v == w, return distance to v
return distance_squared(p, v)
# Consider the line extending the segment, parameterized as v + t (w - v).
# We find projection of point p onto the line.
# It falls where t = [(p-v) . (w-v)] / |w-v|^2
t = ((p.x - v.x) * (w.x - v.x) + (p.y - v.y) * (w.y - v.y)) / d2;
if t < 0:
# Beyond v end of the segment
return distance_squared(p, v)
elif t > 1.0:
# Beyond w end of the segment
return distance_squared(p, w)
else:
# Projection falls on the segment.
proj = Point(v.x + t * (w.x - v.x), v.y + t * (w.y - v.y))
# print proj.x, proj.y
return distance_squared(p, proj)
codice Matlab, con built-in "self test" se chiamano la funzione senza argomenti:
function r = distPointToLineSegment( xy0, xy1, xyP )
% r = distPointToLineSegment( xy0, xy1, xyP )
if( nargin < 3 )
selfTest();
r=0;
else
vx = xy0(1)-xyP(1);
vy = xy0(2)-xyP(2);
ux = xy1(1)-xy0(1);
uy = xy1(2)-xy0(2);
lenSqr= (ux*ux+uy*uy);
detP= -vx*ux + -vy*uy;
if( detP < 0 )
r = norm(xy0-xyP,2);
elseif( detP > lenSqr )
r = norm(xy1-xyP,2);
else
r = abs(ux*vy-uy*vx)/sqrt(lenSqr);
end
end
function selfTest()
%#ok<*NASGU>
disp(['invalid args, distPointToLineSegment running (recursive) self-test...']);
ptA = [1;1]; ptB = [-1;-1];
ptC = [1/2;1/2]; % on the line
ptD = [-2;-1.5]; % too far from line segment
ptE = [1/2;0]; % should be same as perpendicular distance to line
ptF = [1.5;1.5]; % along the A-B but outside of the segment
distCtoAB = distPointToLineSegment(ptA,ptB,ptC)
distDtoAB = distPointToLineSegment(ptA,ptB,ptD)
distEtoAB = distPointToLineSegment(ptA,ptB,ptE)
distFtoAB = distPointToLineSegment(ptA,ptB,ptF)
figure(1); clf;
circle = @(x, y, r, c) rectangle('Position', [x-r, y-r, 2*r, 2*r], ...
'Curvature', [1 1], 'EdgeColor', c);
plot([ptA(1) ptB(1)],[ptA(2) ptB(2)],'r-x'); hold on;
plot(ptC(1),ptC(2),'b+'); circle(ptC(1),ptC(2), 0.5e-1, 'b');
plot(ptD(1),ptD(2),'g+'); circle(ptD(1),ptD(2), distDtoAB, 'g');
plot(ptE(1),ptE(2),'k+'); circle(ptE(1),ptE(2), distEtoAB, 'k');
plot(ptF(1),ptF(2),'m+'); circle(ptF(1),ptF(2), distFtoAB, 'm');
hold off;
axis([-3 3 -3 3]); axis equal;
end
end
E ora la mia soluzione così ...... (Javascript)
E 'molto veloce, perché cerco di evitare qualsiasi funzione Math.pow.
Come si può vedere, alla fine della funzione ho la distanza della linea.
il codice è dal http://www.draw2d.org / graphiti / jsdoc / #! / esempio
/**
* Static util function to determine is a point(px,py) on the line(x1,y1,x2,y2)
* A simple hit test.
*
* @return {boolean}
* @static
* @private
* @param {Number} coronaWidth the accepted corona for the hit test
* @param {Number} X1 x coordinate of the start point of the line
* @param {Number} Y1 y coordinate of the start point of the line
* @param {Number} X2 x coordinate of the end point of the line
* @param {Number} Y2 y coordinate of the end point of the line
* @param {Number} px x coordinate of the point to test
* @param {Number} py y coordinate of the point to test
**/
graphiti.shape.basic.Line.hit= function( coronaWidth, X1, Y1, X2, Y2, px, py)
{
// Adjust vectors relative to X1,Y1
// X2,Y2 becomes relative vector from X1,Y1 to end of segment
X2 -= X1;
Y2 -= Y1;
// px,py becomes relative vector from X1,Y1 to test point
px -= X1;
py -= Y1;
var dotprod = px * X2 + py * Y2;
var projlenSq;
if (dotprod <= 0.0) {
// px,py is on the side of X1,Y1 away from X2,Y2
// distance to segment is length of px,py vector
// "length of its (clipped) projection" is now 0.0
projlenSq = 0.0;
} else {
// switch to backwards vectors relative to X2,Y2
// X2,Y2 are already the negative of X1,Y1=>X2,Y2
// to get px,py to be the negative of px,py=>X2,Y2
// the dot product of two negated vectors is the same
// as the dot product of the two normal vectors
px = X2 - px;
py = Y2 - py;
dotprod = px * X2 + py * Y2;
if (dotprod <= 0.0) {
// px,py is on the side of X2,Y2 away from X1,Y1
// distance to segment is length of (backwards) px,py vector
// "length of its (clipped) projection" is now 0.0
projlenSq = 0.0;
} else {
// px,py is between X1,Y1 and X2,Y2
// dotprod is the length of the px,py vector
// projected on the X2,Y2=>X1,Y1 vector times the
// length of the X2,Y2=>X1,Y1 vector
projlenSq = dotprod * dotprod / (X2 * X2 + Y2 * Y2);
}
}
// Distance to line is now the length of the relative point
// vector minus the length of its projection onto the line
// (which is zero if the projection falls outside the range
// of the line segment).
var lenSq = px * px + py * py - projlenSq;
if (lenSq < 0) {
lenSq = 0;
}
return Math.sqrt(lenSq)<coronaWidth;
};
codificato in T-SQL
Il punto è (@px, @py) ed il segmento di linea va da (@ax, @ay) a (@bx, @by)
create function fn_sqr (@NumberToSquare decimal(18,10))
returns decimal(18,10)
as
begin
declare @Result decimal(18,10)
set @Result = @NumberToSquare * @NumberToSquare
return @Result
end
go
create function fn_Distance(@ax decimal (18,10) , @ay decimal (18,10), @bx decimal(18,10), @by decimal(18,10))
returns decimal(18,10)
as
begin
declare @Result decimal(18,10)
set @Result = (select dbo.fn_sqr(@ax - @bx) + dbo.fn_sqr(@ay - @by) )
return @Result
end
go
create function fn_DistanceToSegmentSquared(@px decimal(18,10), @py decimal(18,10), @ax decimal(18,10), @ay decimal(18,10), @bx decimal(18,10), @by decimal(18,10))
returns decimal(18,10)
as
begin
declare @l2 decimal(18,10)
set @l2 = (select dbo.fn_Distance(@ax, @ay, @bx, @by))
if @l2 = 0
return dbo.fn_Distance(@px, @py, @ax, @ay)
declare @t decimal(18,10)
set @t = ((@px - @ax) * (@bx - @ax) + (@py - @ay) * (@by - @ay)) / @l2
if (@t < 0)
return dbo.fn_Distance(@px, @py, @ax, @ay);
if (@t > 1)
return dbo.fn_Distance(@px, @py, @bx, @by);
return dbo.fn_Distance(@px, @py, @ax + @t * (@bx - @ax), @ay + @t * (@by - @ay))
end
go
create function fn_DistanceToSegment(@px decimal(18,10), @py decimal(18,10), @ax decimal(18,10), @ay decimal(18,10), @bx decimal(18,10), @by decimal(18,10))
returns decimal(18,10)
as
begin
return sqrt(dbo.fn_DistanceToSegmentSquared(@px, @py , @ax , @ay , @bx , @by ))
end
go
--example execution for distance from a point at (6,1) to line segment that runs from (4,2) to (2,1)
select dbo.fn_DistanceToSegment(6, 1, 4, 2, 2, 1)
--result = 2.2360679775
--example execution for distance from a point at (-3,-2) to line segment that runs from (0,-2) to (-2,1)
select dbo.fn_DistanceToSegment(-3, -2, 0, -2, -2, 1)
--result = 2.4961508830
--example execution for distance from a point at (0,-2) to line segment that runs from (0,-2) to (-2,1)
select dbo.fn_DistanceToSegment(0,-2, 0, -2, -2, 1)
--result = 0.0000000000
Sembra che quasi tutti gli altri su StackOverflow ha contribuito una risposta (23 risposte finora), quindi ecco il mio contributo per C #. Questo si basa soprattutto sulla risposta di M. Katz, che a sua volta si basa sulla risposta da Grumdrig.
public struct MyVector
{
private readonly double _x, _y;
// Constructor
public MyVector(double x, double y)
{
_x = x;
_y = y;
}
// Distance from this point to another point, squared
private double DistanceSquared(MyVector otherPoint)
{
double dx = otherPoint._x - this._x;
double dy = otherPoint._y - this._y;
return dx * dx + dy * dy;
}
// Find the distance from this point to a line segment (which is not the same as from this
// point to anywhere on an infinite line). Also returns the closest point.
public double DistanceToLineSegment(MyVector lineSegmentPoint1, MyVector lineSegmentPoint2,
out MyVector closestPoint)
{
return Math.Sqrt(DistanceToLineSegmentSquared(lineSegmentPoint1, lineSegmentPoint2,
out closestPoint));
}
// Same as above, but avoid using Sqrt(), saves a new nanoseconds in cases where you only want
// to compare several distances to find the smallest or largest, but don't need the distance
public double DistanceToLineSegmentSquared(MyVector lineSegmentPoint1,
MyVector lineSegmentPoint2, out MyVector closestPoint)
{
// Compute length of line segment (squared) and handle special case of coincident points
double segmentLengthSquared = lineSegmentPoint1.DistanceSquared(lineSegmentPoint2);
if (segmentLengthSquared < 1E-7f) // Arbitrary "close enough for government work" value
{
closestPoint = lineSegmentPoint1;
return this.DistanceSquared(closestPoint);
}
// Use the magic formula to compute the "projection" of this point on the infinite line
MyVector lineSegment = lineSegmentPoint2 - lineSegmentPoint1;
double t = (this - lineSegmentPoint1).DotProduct(lineSegment) / segmentLengthSquared;
// Handle the two cases where the projection is not on the line segment, and the case where
// the projection is on the segment
if (t <= 0)
closestPoint = lineSegmentPoint1;
else if (t >= 1)
closestPoint = lineSegmentPoint2;
else
closestPoint = lineSegmentPoint1 + (lineSegment * t);
return this.DistanceSquared(closestPoint);
}
public double DotProduct(MyVector otherVector)
{
return this._x * otherVector._x + this._y * otherVector._y;
}
public static MyVector operator +(MyVector leftVector, MyVector rightVector)
{
return new MyVector(leftVector._x + rightVector._x, leftVector._y + rightVector._y);
}
public static MyVector operator -(MyVector leftVector, MyVector rightVector)
{
return new MyVector(leftVector._x - rightVector._x, leftVector._y - rightVector._y);
}
public static MyVector operator *(MyVector aVector, double aScalar)
{
return new MyVector(aVector._x * aScalar, aVector._y * aScalar);
}
// Added using ReSharper due to CodeAnalysis nagging
public bool Equals(MyVector other)
{
return _x.Equals(other._x) && _y.Equals(other._y);
}
public override bool Equals(object obj)
{
if (ReferenceEquals(null, obj)) return false;
return obj is MyVector && Equals((MyVector) obj);
}
public override int GetHashCode()
{
unchecked
{
return (_x.GetHashCode()*397) ^ _y.GetHashCode();
}
}
public static bool operator ==(MyVector left, MyVector right)
{
return left.Equals(right);
}
public static bool operator !=(MyVector left, MyVector right)
{
return !left.Equals(right);
}
}
Ed ecco un piccolo programma di test.
public static class JustTesting
{
public static void Main()
{
Stopwatch stopwatch = new Stopwatch();
stopwatch.Start();
for (int i = 0; i < 10000000; i++)
{
TestIt(1, 0, 0, 0, 1, 1, 0.70710678118654757);
TestIt(5, 4, 0, 0, 20, 10, 1.3416407864998738);
TestIt(30, 15, 0, 0, 20, 10, 11.180339887498949);
TestIt(-30, 15, 0, 0, 20, 10, 33.541019662496844);
TestIt(5, 1, 0, 0, 10, 0, 1.0);
TestIt(1, 5, 0, 0, 0, 10, 1.0);
}
stopwatch.Stop();
TimeSpan timeSpan = stopwatch.Elapsed;
}
private static void TestIt(float aPointX, float aPointY,
float lineSegmentPoint1X, float lineSegmentPoint1Y,
float lineSegmentPoint2X, float lineSegmentPoint2Y,
double expectedAnswer)
{
// Katz
double d1 = DistanceFromPointToLineSegment(new MyVector(aPointX, aPointY),
new MyVector(lineSegmentPoint1X, lineSegmentPoint1Y),
new MyVector(lineSegmentPoint2X, lineSegmentPoint2Y));
Debug.Assert(d1 == expectedAnswer);
/*
// Katz using squared distance
double d2 = DistanceFromPointToLineSegmentSquared(new MyVector(aPointX, aPointY),
new MyVector(lineSegmentPoint1X, lineSegmentPoint1Y),
new MyVector(lineSegmentPoint2X, lineSegmentPoint2Y));
Debug.Assert(Math.Abs(d2 - expectedAnswer * expectedAnswer) < 1E-7f);
*/
/*
// Matti (optimized)
double d3 = FloatVector.DistanceToLineSegment(new PointF(aPointX, aPointY),
new PointF(lineSegmentPoint1X, lineSegmentPoint1Y),
new PointF(lineSegmentPoint2X, lineSegmentPoint2Y));
Debug.Assert(Math.Abs(d3 - expectedAnswer) < 1E-7f);
*/
}
private static double DistanceFromPointToLineSegment(MyVector aPoint,
MyVector lineSegmentPoint1, MyVector lineSegmentPoint2)
{
MyVector closestPoint; // Not used
return aPoint.DistanceToLineSegment(lineSegmentPoint1, lineSegmentPoint2,
out closestPoint);
}
private static double DistanceFromPointToLineSegmentSquared(MyVector aPoint,
MyVector lineSegmentPoint1, MyVector lineSegmentPoint2)
{
MyVector closestPoint; // Not used
return aPoint.DistanceToLineSegmentSquared(lineSegmentPoint1, lineSegmentPoint2,
out closestPoint);
}
}
Come potete vedere, ho provato a misurare la differenza tra l'utilizzo della versione che evita il metodo Sqrt () e la versione normale. Le mie prove indicano che si può forse risparmiare circa il 2,5%, ma non sono nemmeno sicuro di che - le variazioni all'interno delle varie corse di prova erano dello stesso ordine di grandezza. Ho provato anche la misura della versione postato da Matti (più un'ottimizzazione ovvio), e che la versione sembra essere circa il 4% più lento rispetto alla versione basata sul codice Katz / Grumdrig.
Modifica:. Per inciso, ho provato anche la misurazione di un metodo che trova la distanza da una linea infinita (non un segmento di linea) utilizzando un prodotto vettoriale (e uno Sqrt ()), ed è circa il 32% più veloce
Ecco C di devnullicus ++ versione convertita in C #. Per la mia applicazione ho bisogno di conoscere il punto di intersezione e ha trovato la sua soluzione per lavorare bene.
public static bool PointSegmentDistanceSquared(PointF point, PointF lineStart, PointF lineEnd, out double distance, out PointF intersectPoint)
{
const double kMinSegmentLenSquared = 0.00000001; // adjust to suit. If you use float, you'll probably want something like 0.000001f
const double kEpsilon = 1.0E-14; // adjust to suit. If you use floats, you'll probably want something like 1E-7f
double dX = lineEnd.X - lineStart.X;
double dY = lineEnd.Y - lineStart.Y;
double dp1X = point.X - lineStart.X;
double dp1Y = point.Y - lineStart.Y;
double segLenSquared = (dX * dX) + (dY * dY);
double t = 0.0;
if (segLenSquared >= -kMinSegmentLenSquared && segLenSquared <= kMinSegmentLenSquared)
{
// segment is a point.
intersectPoint = lineStart;
t = 0.0;
distance = ((dp1X * dp1X) + (dp1Y * dp1Y));
}
else
{
// Project a line from p to the segment [p1,p2]. By considering the line
// extending the segment, parameterized as p1 + (t * (p2 - p1)),
// we find projection of point p onto the line.
// It falls where t = [(p - p1) . (p2 - p1)] / |p2 - p1|^2
t = ((dp1X * dX) + (dp1Y * dY)) / segLenSquared;
if (t < kEpsilon)
{
// intersects at or to the "left" of first segment vertex (lineStart.X, lineStart.Y). If t is approximately 0.0, then
// intersection is at p1. If t is less than that, then there is no intersection (i.e. p is not within
// the 'bounds' of the segment)
if (t > -kEpsilon)
{
// intersects at 1st segment vertex
t = 0.0;
}
// set our 'intersection' point to p1.
intersectPoint = lineStart;
// Note: If you wanted the ACTUAL intersection point of where the projected lines would intersect if
// we were doing PointLineDistanceSquared, then intersectPoint.X would be (lineStart.X + (t * dx)) and intersectPoint.Y would be (lineStart.Y + (t * dy)).
}
else if (t > (1.0 - kEpsilon))
{
// intersects at or to the "right" of second segment vertex (lineEnd.X, lineEnd.Y). If t is approximately 1.0, then
// intersection is at p2. If t is greater than that, then there is no intersection (i.e. p is not within
// the 'bounds' of the segment)
if (t < (1.0 + kEpsilon))
{
// intersects at 2nd segment vertex
t = 1.0;
}
// set our 'intersection' point to p2.
intersectPoint = lineEnd;
// Note: If you wanted the ACTUAL intersection point of where the projected lines would intersect if
// we were doing PointLineDistanceSquared, then intersectPoint.X would be (lineStart.X + (t * dx)) and intersectPoint.Y would be (lineStart.Y + (t * dy)).
}
else
{
// The projection of the point to the point on the segment that is perpendicular succeeded and the point
// is 'within' the bounds of the segment. Set the intersection point as that projected point.
intersectPoint = new PointF((float)(lineStart.X + (t * dX)), (float)(lineStart.Y + (t * dY)));
}
// return the squared distance from p to the intersection point. Note that we return the squared distance
// as an optimization because many times you just need to compare relative distances and the squared values
// works fine for that. If you want the ACTUAL distance, just take the square root of this value.
double dpqX = point.X - intersectPoint.X;
double dpqY = point.Y - intersectPoint.Y;
distance = ((dpqX * dpqX) + (dpqY * dpqY));
}
return true;
}
Qui si sta usando Swift
/* Distance from a point (p1) to line l1 l2 */
func distanceFromPoint(p: CGPoint, toLineSegment l1: CGPoint, and l2: CGPoint) -> CGFloat {
let A = p.x - l1.x
let B = p.y - l1.y
let C = l2.x - l1.x
let D = l2.y - l1.y
let dot = A * C + B * D
let len_sq = C * C + D * D
let param = dot / len_sq
var xx, yy: CGFloat
if param < 0 || (l1.x == l2.x && l1.y == l2.y) {
xx = l1.x
yy = l1.y
} else if param > 1 {
xx = l2.x
yy = l2.y
} else {
xx = l1.x + param * C
yy = l1.y + param * D
}
let dx = p.x - xx
let dy = p.y - yy
return sqrt(dx * dx + dy * dy)
}
vedi la toolbox Matlab geometria nel seguente sito web: http://people.sc.fsu.edu/~jburkardt/m_src /geometry/geometry.html
Ctrl + F e digitare "segmento" di trovare le funzioni relative segmento di linea. le funzioni "segment_point_dist_2d.m" e "segment_point_dist_3d.m" sono quello che ti serve.
I codici GEOMETRIA sono disponibili in versione C e una versione C ++ e una versione Fortran77 e una versione Fortran90 e una versione di MATLAB.
Versione autohotkey sulla base di Javascript del Joshua:
plDist(x, y, x1, y1, x2, y2) {
A:= x - x1
B:= y - y1
C:= x2 - x1
D:= y2 - y1
dot:= A*C + B*D
sqLen:= C*C + D*D
param:= dot / sqLen
if (param < 0 || ((x1 = x2) && (y1 = y2))) {
xx:= x1
yy:= y1
} else if (param > 1) {
xx:= x2
yy:= y2
} else {
xx:= x1 + param*C
yy:= y1 + param*D
}
dx:= x - xx
dy:= y - yy
return sqrt(dx*dx + dy*dy)
}
Non ho visto un'implementazione Java qui, quindi ho tradotto la funzione Javascript dalla risposta accettato di codice Java:
static double sqr(double x) {
return x * x;
}
static double dist2(DoublePoint v, DoublePoint w) {
return sqr(v.x - w.x) + sqr(v.y - w.y);
}
static double distToSegmentSquared(DoublePoint p, DoublePoint v, DoublePoint w) {
double l2 = dist2(v, w);
if (l2 == 0) return dist2(p, v);
double t = ((p.x - v.x) * (w.x - v.x) + (p.y - v.y) * (w.y - v.y)) / l2;
if (t < 0) return dist2(p, v);
if (t > 1) return dist2(p, w);
return dist2(p, new DoublePoint(
v.x + t * (w.x - v.x),
v.y + t * (w.y - v.y)
));
}
static double distToSegment(DoublePoint p, DoublePoint v, DoublePoint w) {
return Math.sqrt(distToSegmentSquared(p, v, w));
}
static class DoublePoint {
public double x;
public double y;
public DoublePoint(double x, double y) {
this.x = x;
this.y = y;
}
}
versione WPF:
public class LineSegment
{
private readonly Vector _offset;
private readonly Vector _vector;
public LineSegment(Point start, Point end)
{
_offset = (Vector)start;
_vector = (Vector)(end - _offset);
}
public double DistanceTo(Point pt)
{
var v = (Vector)pt - _offset;
// first, find a projection point on the segment in parametric form (0..1)
var p = (v * _vector) / _vector.LengthSquared;
// and limit it so it lays inside the segment
p = Math.Min(Math.Max(p, 0), 1);
// now, find the distance from that point to our point
return (_vector * p - v).Length;
}
}
C #
public static double MinimumDistanceToLineSegment(this Point p,
Line line)
{
var v = line.StartPoint;
var w = line.EndPoint;
double lengthSquared = DistanceSquared(v, w);
if (lengthSquared == 0.0)
return Distance(p, v);
double t = Math.Max(0, Math.Min(1, DotProduct(p - v, w - v) / lengthSquared));
var projection = v + t * (w - v);
return Distance(p, projection);
}
public static double Distance(Point a, Point b)
{
return Math.Sqrt(DistanceSquared(a, b));
}
public static double DistanceSquared(Point a, Point b)
{
var d = a - b;
return DotProduct(d, d);
}
public static double DotProduct(Point a, Point b)
{
return (a.X * b.X) + (a.Y * b.Y);
}
Ecco il codice che ho finito per scrivere. Questo codice presuppone che un punto è definito in forma di {x:5, y:7}. Si noti che questo non è il modo in assoluto più efficiente, ma è il più semplice e facile da capire il codice che ho potuto trovare.
// a, b, and c in the code below are all points
function distance(a, b)
{
var dx = a.x - b.x;
var dy = a.y - b.y;
return Math.sqrt(dx*dx + dy*dy);
}
function Segment(a, b)
{
var ab = {
x: b.x - a.x,
y: b.y - a.y
};
var length = distance(a, b);
function cross(c) {
return ab.x * (c.y-a.y) - ab.y * (c.x-a.x);
};
this.distanceFrom = function(c) {
return Math.min(distance(a,c),
distance(b,c),
Math.abs(cross(c) / length));
};
}
La funzione di cui sopra non funziona su linee verticali. Ecco una funzione che sta lavorando bene! Linea con punti p1, p2. e CheckPoint è p;
public float DistanceOfPointToLine2(PointF p1, PointF p2, PointF p)
{
// (y1-y2)x + (x2-x1)y + (x1y2-x2y1)
//d(P,L) = --------------------------------
// sqrt( (x2-x1)pow2 + (y2-y1)pow2 )
double ch = (p1.Y - p2.Y) * p.X + (p2.X - p1.X) * p.Y + (p1.X * p2.Y - p2.X * p1.Y);
double del = Math.Sqrt(Math.Pow(p2.X - p1.X, 2) + Math.Pow(p2.Y - p1.Y, 2));
double d = ch / del;
return (float)d;
}
Ecco stessa cosa come il C ++ risposta, ma porting a Pascal. L'ordine del parametro punto è cambiato per soddisfare il mio codice, ma è la stessa cosa.
function Dot(const p1, p2: PointF): double;
begin
Result := p1.x * p2.x + p1.y * p2.y;
end;
function SubPoint(const p1, p2: PointF): PointF;
begin
result.x := p1.x - p2.x;
result.y := p1.y - p2.y;
end;
function ShortestDistance2(const p,v,w : PointF) : double;
var
l2,t : double;
projection,tt: PointF;
begin
// Return minimum distance between line segment vw and point p
//l2 := length_squared(v, w); // i.e. |w-v|^2 - avoid a sqrt
l2 := Distance(v,w);
l2 := MPower(l2,2);
if (l2 = 0.0) then begin
result:= Distance(p, v); // v == w case
exit;
end;
// Consider the line extending the segment, parameterized as v + t (w - v).
// We find projection of point p onto the line.
// It falls where t = [(p-v) . (w-v)] / |w-v|^2
t := Dot(SubPoint(p,v),SubPoint(w,v)) / l2;
if (t < 0.0) then begin
result := Distance(p, v); // Beyond the 'v' end of the segment
exit;
end
else if (t > 1.0) then begin
result := Distance(p, w); // Beyond the 'w' end of the segment
exit;
end;
//projection := v + t * (w - v); // Projection falls on the segment
tt.x := v.x + t * (w.x - v.x);
tt.y := v.y + t * (w.y - v.y);
result := Distance(p, tt);
end;
%Matlab solution by Tim from Cody
function ans=distP2S(x0,y0,x1,y1,x2,y2)
% Point is x0,y0
z=complex(x0-x1,y0-y1);
complex(x2-x1,y2-y1);
abs(z-ans*min(1,max(0,real(z/ans))));
