Converti bool [] per byte []
Domanda
Ho un List<bool>
cui voglio convertire in un byte[]
. Come faccio a fare questo?
list.toArray()
crea un bool[]
.
Soluzione
Ecco due approcci, a seconda se si vuole mettere in valigia i bit in byte, o che hanno il maggior numero di byte come bit originali:
bool[] bools = { true, false, true, false, false, true, false, true,
true };
// basic - same count
byte[] arr1 = Array.ConvertAll(bools, b => b ? (byte)1 : (byte)0);
// pack (in this case, using the first bool as the lsb - if you want
// the first bool as the msb, reverse things ;-p)
int bytes = bools.Length / 8;
if ((bools.Length % 8) != 0) bytes++;
byte[] arr2 = new byte[bytes];
int bitIndex = 0, byteIndex = 0;
for (int i = 0; i < bools.Length; i++)
{
if (bools[i])
{
arr2[byteIndex] |= (byte)(((byte)1) << bitIndex);
}
bitIndex++;
if (bitIndex == 8)
{
bitIndex = 0;
byteIndex++;
}
}
Altri suggerimenti
È possibile utilizzare LINQ. Questo non sarà efficace, ma sarà semplice. Sto assumendo che si desidera un byte per bool.
bool[] a = new bool[] { true, false, true, true, false, true };
byte[] b = (from x in a select x ? (byte)0x1 : (byte)0x0).ToArray();
La risposta di Marc è buona già, ma ...
Supponendo tu sei il tipo di persona che è comodo fare bit-giocherellando, o semplicemente si vuole scrivere meno codice e spremere un po 'di più le prestazioni, allora questo Codice di è per voi buon signore / signora:
byte[] PackBoolsInByteArray(bool[] bools)
{
int len = bools.Length;
int bytes = len >> 3;
if ((len & 0x07) != 0) ++bytes;
byte[] arr2 = new byte[bytes];
for (int i = 0; i < bools.Length; i++)
{
if (bools[i])
arr2[i >> 3] |= (byte)(1 << (i & 0x07));
}
}
Si fa la stessa cosa esatta come codice di Marc, è solo più succinto.
Naturalmente se davvero vuole andare tutti fuori abbiamo potuto srotolare troppo ...
... e mentre siamo a permette un tiro in una palla curva sul tipo di ritorno!
IEnumerable<byte> PackBoolsInByteEnumerable(bool[] bools)
{
int len = bools.Length;
int rem = len & 0x07; // hint: rem = len % 8.
/*
byte[] byteArr = rem == 0 // length is a multiple of 8? (no remainder?)
? new byte[len >> 3] // -yes-
: new byte[(len >> 3)+ 1]; // -no-
*/
const byte BZ = 0,
B0 = 1 << 0, B1 = 1 << 1, B2 = 1 << 2, B3 = 1 << 3,
B4 = 1 << 4, B5 = 1 << 5, B6 = 1 << 6, B7 = 1 << 7;
byte b;
int i = 0;
for (int mul = len & ~0x07; i < mul; i += 8) // hint: len = mul + rem.
{
b = bools[i] ? B0 : BZ;
if (bools[i + 1]) b |= B1;
if (bools[i + 2]) b |= B2;
if (bools[i + 3]) b |= B3;
if (bools[i + 4]) b |= B4;
if (bools[i + 5]) b |= B5;
if (bools[i + 6]) b |= B6;
if (bools[i + 7]) b |= B7;
//byteArr[i >> 3] = b;
yield return b;
}
if (rem != 0) // take care of the remainder...
{
b = bools[i] ? B0 : BZ; // (there is at least one more bool.)
switch (rem) // rem is [1:7] (fall-through switch!)
{
case 7:
if (bools[i + 6]) b |= B6;
goto case 6;
case 6:
if (bools[i + 5]) b |= B5;
goto case 5;
case 5:
if (bools[i + 4]) b |= B4;
goto case 4;
case 4:
if (bools[i + 3]) b |= B3;
goto case 3;
case 3:
if (bools[i + 2]) b |= B2;
goto case 2;
case 2:
if (bools[i + 1]) b |= B1;
break;
// case 1 is the statement above the switch!
}
//byteArr[i >> 3] = b; // write the last byte to the array.
yield return b; // yield the last byte.
}
//return byteArr;
}
Suggerimento: Come potete vedere ho inserito il codice per la restituzione di un byte[]
come commenti. Basta commentare le due dichiarazioni di resa, invece, se questo è ciò che si vuole / bisogno.
mani in Suggerimenti:
Shifting x >> 3
è un x / 8
più conveniente.
Masking x & 0x07
è un x % 8
più conveniente.
Masking x & ~0x07
è un x - x % 8
più conveniente.
Modifica Ecco qualche esempio di documentazione:
/// <summary>
/// Bit-packs an array of booleans into bytes, one bit per boolean.
/// </summary><remarks>
/// Booleans are bit-packed into bytes, in order, from least significant
/// bit to most significant bit of each byte.<br/>
/// If the length of the input array isn't a multiple of eight, then one
/// or more of the most significant bits in the last byte returned will
/// be unused. Unused bits are zero / unset.
/// </remarks>
/// <param name="bools">An array of booleans to pack into bytes.</param>
/// <returns>
/// An IEnumerable<byte> of bytes each containing (up to) eight
/// bit-packed booleans.
/// </returns>
Se avete alcun controllo sul tipo di lista, provare a fare un elenco, che sarà poi produrre il byte [] sul ToArray (). Se si dispone di un ArrayList, è possibile utilizzare:
(byte[])list.ToArray(typeof(byte));
per ottenere l'elenco, è possibile creare uno con la vostra lista iteratore specificato come input per il costruttore, e quindi produrre il ToArray ()? O copiare ogni elemento, lanciando un nuovo byte da bool?
Alcune informazioni su che tipo di lista è potrebbe aiutare.
Dai un'occhiata al href="http://msdn.microsoft.com/en-us/library/system.bitconverter.aspx" rel="nofollow noreferrer"> BitConverter classe
Un altro approccio LINQ, meno efficace rispetto @ hfcs101 di ma sarebbe facilmente lavorare per gli altri tipi di valore così:
var a = new [] { true, false, true, true, false, true };
byte[] b = a.Select(BitConverter.GetBytes).SelectMany(x => x).ToArray();
In alternativa l'approccio IEnumerable
di AnorZaken risposta :
static IEnumerable<byte> PackBools(IEnumerable<bool> bools)
{
int bitIndex = 0;
byte currentByte = 0;
foreach (bool val in bools) {
if (val)
currentByte |= (byte)(1 << bitIndex);
if (++bitIndex == 8) {
yield return currentByte;
bitIndex = 0;
currentByte = 0;
}
}
if (bitIndex != 8) {
yield return currentByte;
}
}
E il secondo disimballaggio dove paddingEnd
intende la quantità di bit per scartare dall'ultimo byte per decomprimere:
static IEnumerable<bool> UnpackBools(IEnumerable<byte> bytes, int paddingEnd = 0)
{
using (var enumerator = bytes.GetEnumerator()) {
bool last = !enumerator.MoveNext();
while (!last) {
byte current = enumerator.Current;
last = !enumerator.MoveNext();
for (int i = 0; i < 8 - (last ? paddingEnd : 0); i++) {
yield return (current & (1 << i)) != 0;
}
}
}
}