Come analizzare un ISO-8601 durata in Objective C?
-
16-09-2019 - |
Domanda
Sto cercando un modo semplice per analizzare una stringa che contiene un ISO-8601 durata in Objective C.Il risultato dovrebbe essere qualcosa di utilizzabile come un NSTimeInterval
.
Un esempio di un ISO-8601 durata: P1DT13H24M17S
, il che significa che 1 giorno, 13 ore, 24 minuti e 17 secondi.
Soluzione
Se si sa esattamente quali campi ti verrà ottenere, è possibile utilizzare una invocazione di sscanf()
:
const char *stringToParse = ...;
int days, hours, minutes, seconds;
NSTimeInterval interval;
if(sscanf(stringToParse, "P%dDT%dH%dM%sS", &days, &hours, &minutes, &seconds) == 4)
interval = ((days * 24 + hours) * 60 + minutes) * 60 + seconds;
else
; // handle error, parsing failed
Se uno qualsiasi dei campi potrebbe essere omesso, avrete bisogno di essere un po ' più intelligente nella tua analisi, ad es.:
const char *stringToParse = ...;
int days = 0, hours = 0, minutes = 0, seconds = 0;
const char *ptr = stringToParse;
while(*ptr)
{
if(*ptr == 'P' || *ptr == 'T')
{
ptr++;
continue;
}
int value, charsRead;
char type;
if(sscanf(ptr, "%d%c%n", &value, &type, &charsRead) != 2)
; // handle parse error
if(type == 'D')
days = value;
else if(type == 'H')
hours = value;
else if(type == 'M')
minutes = value;
else if(type == 'S')
seconds = value;
else
; // handle invalid type
ptr += charsRead;
}
NSTimeInterval interval = ((days * 24 + hours) * 60 + minutes) * 60 + seconds;
Altri suggerimenti
Un puro Obiettivo C versione...
NSString *duration = @"P1DT10H15M49S";
int i = 0, days = 0, hours = 0, minutes = 0, seconds = 0;
while(i < duration.length)
{
NSString *str = [duration substringWithRange:NSMakeRange(i, duration.length-i)];
i++;
if([str hasPrefix:@"P"] || [str hasPrefix:@"T"])
continue;
NSScanner *sc = [NSScanner scannerWithString:str];
int value = 0;
if ([sc scanInt:&value])
{
i += [sc scanLocation]-1;
str = [duration substringWithRange:NSMakeRange(i, duration.length-i)];
i++;
if([str hasPrefix:@"D"])
days = value;
else if([str hasPrefix:@"H"])
hours = value;
else if([str hasPrefix:@"M"])
minutes = value;
else if([str hasPrefix:@"S"])
seconds = value;
}
}
NSLog(@"%@", [NSString stringWithFormat:@"%d days, %d hours, %d mins, %d seconds", days, hours, minutes, seconds]);
Questa versione di analizzare ogni youtube durata senza errori.
Importante: Questa versione l'uso dell'ARCO.
- (NSString*)parseISO8601Time:(NSString*)duration
{
NSInteger hours = 0;
NSInteger minutes = 0;
NSInteger seconds = 0;
//Get Time part from ISO 8601 formatted duration http://en.wikipedia.org/wiki/ISO_8601#Durations
duration = [duration substringFromIndex:[duration rangeOfString:@"T"].location];
while ([duration length] > 1) { //only one letter remains after parsing
duration = [duration substringFromIndex:1];
NSScanner *scanner = [[NSScanner alloc] initWithString:duration];
NSString *durationPart = [[NSString alloc] init];
[scanner scanCharactersFromSet:[NSCharacterSet characterSetWithCharactersInString:@"0123456789"] intoString:&durationPart];
NSRange rangeOfDurationPart = [duration rangeOfString:durationPart];
duration = [duration substringFromIndex:rangeOfDurationPart.location + rangeOfDurationPart.length];
if ([[duration substringToIndex:1] isEqualToString:@"H"]) {
hours = [durationPart intValue];
}
if ([[duration substringToIndex:1] isEqualToString:@"M"]) {
minutes = [durationPart intValue];
}
if ([[duration substringToIndex:1] isEqualToString:@"S"]) {
seconds = [durationPart intValue];
}
}
return [NSString stringWithFormat:@"%02d:%02d:%02d", hours, minutes, seconds];
}
Swift2 attuazione: https://github.com/Igor-Palaguta/YoutubeEngine/blob/swift-2.3/YoutubeEngine/Classes/Parser/NSDateComponents+ISO8601.swift
Esempio:let components = NSDateComponents(ISO8601String: "P1Y2M3DT4H5M6S")
Inoltre gestisce correttamente "P1M" e "PT1M" casi
Swift3 attuazione:https://github.com/Igor-Palaguta/YoutubeEngine/blob/master/Source/YoutubeEngine/Parser/NSDateComponents%2BISO8601.swift
Esempio:let components = dateComponents(ISO8601String: "P1Y2M3DT4H5M6S")
Aggiornamento 20.01.2017:Aggiunto il supporto per settimane
leggermente modificando in funzione dell'utente
Sergei Pekar
+ (NSString*)parseISO8601Time:(NSString*)duration
{
NSInteger hours = 0;
NSInteger minutes = 0;
NSInteger seconds = 0;
//Get Time part from ISO 8601 formatted duration http://en.wikipedia.org/wiki/ISO_8601#Durations
if ([duration rangeOfString:@"T"].location == NSNotFound || [duration rangeOfString:@"P"].location == NSNotFound) {
NSLog(@"Time is not a part from ISO 8601 formatted duration");
return @"0:00 Error";
}
duration = [duration substringFromIndex:[duration rangeOfString:@"T"].location];
while ([duration length] > 1) { //only one letter remains after parsing
duration = [duration substringFromIndex:1];
NSScanner *scanner = [[NSScanner alloc] initWithString:duration];
NSString *durationPart = [[NSString alloc] init];
[scanner scanCharactersFromSet:[NSCharacterSet characterSetWithCharactersInString:@"0123456789"] intoString:&durationPart];
NSRange rangeOfDurationPart = [duration rangeOfString:durationPart];
if ((rangeOfDurationPart.location + rangeOfDurationPart.length) > duration.length) {
NSLog(@"Time is not a part from ISO 8601 formatted duration");
return @"0:00 Error";
}
duration = [duration substringFromIndex:rangeOfDurationPart.location + rangeOfDurationPart.length];
if ([[duration substringToIndex:1] isEqualToString:@"H"]) {
hours = [durationPart intValue];
}
if ([[duration substringToIndex:1] isEqualToString:@"M"]) {
minutes = [durationPart intValue];
}
if ([[duration substringToIndex:1] isEqualToString:@"S"]) {
seconds = [durationPart intValue];
}
}
if (hours != 0)
return [NSString stringWithFormat:@"%ld:%02ld:%02ld", (long)hours, (long)minutes, (long)seconds];
else
return [NSString stringWithFormat:@"%ld:%02ld", (long)minutes, (long)seconds];
}
Qui è un esempio per swift:(solo per ore, minuti e secondi)
func parseDuration(duration: String) -> Int {
var days = 0
var hours = 0
var minutes = 0
var seconds = 0
var decisionMaker = 0
var factor = 1
let specifiers: [Character] = ["M", "H", "T", "P"]
let length = count(duration)
for i in 1...length {
let index = advance(duration.startIndex, length - i)
let char = duration[index]
for specifier in specifiers {
if char == specifier {
decisionMaker++
factor = 1
}
}
if let value = String(char).toInt() {
switch decisionMaker {
case 0:
seconds += value * factor
factor *= 10
case 1:
minutes += value * factor
factor *= 10
case 2:
hours += value * factor
factor *= 10
case 4:
days += value * factor
factor *= 10
default:
break
}
}
}
return seconds + (minutes * 60) + (hours * 3600) + (days * 3600 * 24)
}
Ecco swift 3 versione di headkaze esempio:Questo formato è più adatto nel mio caso:
private func parseISO8601Time(iso8601: String) -> String {
let nsISO8601 = NSString(string: iso8601)
var days = 0, hours = 0, minutes = 0, seconds = 0
var i = 0
while i < nsISO8601.length {
var str = nsISO8601.substring(with: NSRange(location: i, length: nsISO8601.length - i))
i += 1
if str.hasPrefix("P") || str.hasPrefix("T") { continue }
let scanner = Scanner(string: str)
var value = 0
if scanner.scanInt(&value) {
i += scanner.scanLocation - 1
str = nsISO8601.substring(with: NSRange(location: i, length: nsISO8601.length - i))
i += 1
if str.hasPrefix("D") {
days = value
} else if str.hasPrefix("H") {
hours = value
} else if str.hasPrefix("M") {
minutes = value
} else if str.hasPrefix("S") {
seconds = value
}
}
}
if days > 0 {
hours += 24 * days
}
if hours > 0 {
return String(format: "%d:%02d:%02d", hours, minutes, seconds)
}
return String(format: "%d:%02d", minutes, seconds)
}
Ho guardato questo Articolo di Wikipedia per un riferimento al modo in ISO-8601 effettivamente funziona.Io non sono di Cacao esperto, ma io sono di scommesse se si può analizzare la stringa ed estrarre il componente di ore, minuti, secondi, giorno, ecc.... ottenere in un NSTimeInterval dovrebbe essere facile.La parte difficile è l'analisi di esso.Io probabilmente fare qualcosa di simile a questo:
Primo, dividere la stringa in due stringhe separate:uno che rappresenta i giorni, e uno che rappresenta il momento.NSString ha un metodo di istanza componentsSeparatedByString:NSString che restituisce un NSArray di sottostringhe di originale NSString separati dal parametro passato.Sarebbe guardare qualcosa come questo:
NSString* iso8601 = /*However you're getting your string in*/
NSArray* iso8601Parts = [iso8601 componentsSeparatedByString:@"T"];
Quindi, cerca il primo elemento di iso8601Parts per ogni giorno di durata indicatori (Y, M, W e D).Quando si trova uno, prendi tutti i precedenti cifre (e, eventualmente, un punto decimale), gettato con il galleggiante, e memorizzarli da qualche parte.Ricordate che se c'era solo un elemento di tempo, quindi iso8601Parts[0] sarà una stringa vuota.
Quindi, fare la stessa cosa cercando di parti di ora il secondo elemento di iso8601Parts per possibili indicatori di tempo (H, M, S).Ricordate che se ci fosse stata solo una giornata componente (che è, non c'era 'T' carattere nella stringa originale), quindi iso8601Parts di lunghezza, e un tentativo di accesso secondo elemento di causare un limite eccezione.
Un NSTimeInterval è solo un lungo memorizzazione di un numero di secondi, in modo da convertire i singoli pezzi si è tirato indietro per secondi, aggiungerli insieme, nel nostro archivio, NSTimeInterval, e sei a posto.
Scusa, so di aver chiesto un modo "facile" per farlo, ma in base alla mia (è vero che la luce) a cercare in giro e la conoscenza delle API, questo è il modo più semplice per farlo.
Veloce e sporco di attuazione
- (NSInteger)integerFromYoutubeDurationString:(NSString*)duration{
if(duration == nil){
return 0;
}
NSString *startConst = @"PT";
NSString *hoursConst = @"H";
NSString *minutesConst = @"M";
NSString *secondsConst = @"S";
NSString *hours = nil;
NSString *minutes = nil;
NSString *seconds = nil;
NSInteger totalSeconds = 0;
NSString *clean = [duration componentsSeparatedByString:startConst][1];
if([clean containsString:hoursConst]){
hours = [clean componentsSeparatedByString:hoursConst][0];
clean = [clean componentsSeparatedByString:hoursConst][1];
totalSeconds = [hours integerValue]*3600;
}
if([clean containsString:minutesConst]){
minutes = [clean componentsSeparatedByString:minutesConst][0];
clean = [clean componentsSeparatedByString:minutesConst][1];
totalSeconds = totalSeconds + [minutes integerValue]*60;
}
if([clean containsString:secondsConst]){
seconds = [clean componentsSeparatedByString:secondsConst][0];
totalSeconds = totalSeconds + [seconds integerValue];
}
return totalSeconds;
}
Non ci sono risposte già, ma ho finito per l'implementazione di una versione ancora diversa utilizzando NSScanner
.Questa versione ignora l'anno e il mese in quanto essi non possono essere convertiti in numero di secondi.
static NSTimeInterval timeIntervalFromISO8601Duration(NSString *duration) {
NSTimeInterval timeInterval = 0;
NSScanner *scanner = [NSScanner scannerWithString:duration];
NSCharacterSet *designators = [NSCharacterSet characterSetWithCharactersInString:@"PYMWDTHMS"];
BOOL isScanningTime = NO;
while (![scanner isAtEnd]) {
double scannedNumber = 0;
BOOL didScanNumber = [scanner scanDouble:&scannedNumber];
NSString *scanned = nil;
if ([scanner scanCharactersFromSet:designators intoString:&scanned]) {
if (didScanNumber) {
switch ([scanned characterAtIndex:0]) {
case 'D':
timeInterval += scannedNumber * 60 * 60 * 24;
break;
case 'H':
timeInterval += scannedNumber * 60 * 60;
break;
case 'M':
if (isScanningTime) {
timeInterval += scannedNumber * 60;
}
break;
case 'S':
timeInterval += scannedNumber;
break;
default:
break;
}
}
if ([scanned containsString:@"T"]) {
isScanningTime = YES;
}
}
}
return timeInterval;
}
Ora in Swift
!(Sì, è un po ' lungo, ma gestisce tutti i casi e singolare/plurale).
Maniglie di Anni, Mesi, Settimane, Giorni, Ore, Minuti e Secondi!
func convertFromISO8601Duration(isoValue: AnyObject) -> String? {
var displayedString: String?
var hasHitTimeSection = false
var isSingular = false
if let isoString = isoValue as? String {
displayedString = String()
for val in isoString {
if val == "P" {
// Do nothing when parsing the 'P'
continue
}else if val == "T" {
// Indicate that we are now dealing with the 'time section' of the ISO8601 duration, then carry on.
hasHitTimeSection = true
continue
}
var tempString = String()
if val >= "0" && val <= "9" {
// We need to know whether or not the value is singular ('1') or not ('11', '23').
if let safeDisplayedString = displayedString as String!
where count(displayedString!) > 0 && val == "1" {
let lastIndex = count(safeDisplayedString) - 1
let lastChar = safeDisplayedString[advance(safeDisplayedString.startIndex, lastIndex)]
//test if the current last char in the displayed string is a space (" "). If it is then we will say it's singular until proven otherwise.
if lastChar == " " {
isSingular = true
} else {
isSingular = false
}
}
else if val == "1" {
// if we are just dealing with a '1' then we will say it's singular until proven otherwise.
isSingular = true
}
else {
// ...otherwise it's a plural duration.
isSingular = false
}
tempString += "\(val)"
displayedString! += tempString
} else {
// handle the duration type text. Make sure to use Months & Minutes correctly.
switch val {
case "Y", "y":
if isSingular {
tempString += " Year "
} else {
tempString += " Years "
}
break
case "M", "m":
if hasHitTimeSection {
if isSingular {
tempString += " Minute "
} else {
tempString += " Minutes "
}
}
else {
if isSingular {
tempString += " Month "
} else {
tempString += " Months "
}
}
break
case "W", "w":
if isSingular {
tempString += " Week "
} else {
tempString += " Weeks "
}
break
case "D", "d":
if isSingular {
tempString += " Day "
} else {
tempString += " Days "
}
break
case "H", "h":
if isSingular {
tempString += " Hour "
} else {
tempString += " Hours "
}
break
case "S", "s":
if isSingular {
tempString += " Second "
} else {
tempString += " Seconds "
}
break
default:
break
}
// reset our singular flag, since we're starting a new duration.
isSingular = false
displayedString! += tempString
}
}
}
return displayedString
}
Swift versione 4.2
Funziona con gli anni, mesi, giorni, ore, minuti, secondi.I secondi possono essere float numero.
extension String{
public func parseISO8601Time() -> Duration {
let nsISO8601 = NSString(string: self)
var days = 0, hours = 0, minutes = 0, seconds: Float = 0, weeks = 0, months = 0, years = 0
var i = 0
var beforeT:Bool = true
while i < nsISO8601.length {
var str = nsISO8601.substring(with: NSRange(location: i, length: nsISO8601.length - i))
i += 1
if str.hasPrefix("P") || str.hasPrefix("T") {
beforeT = !str.hasPrefix("T")
continue
}
let scanner = Scanner(string: str)
var value: Float = 0
if scanner.scanFloat(&value) {
i += scanner.scanLocation - 1
str = nsISO8601.substring(with: NSRange(location: i, length: nsISO8601.length - i))
i += 1
if str.hasPrefix("Y") {
years = Int(value)
} else if str.hasPrefix("M") {
if beforeT{
months = Int(value)
}else{
minutes = Int(value)
}
} else if str.hasPrefix("W") {
weeks = Int(value)
} else if str.hasPrefix("D") {
days = Int(value)
} else if str.hasPrefix("H") {
hours = Int(value)
} else if str.hasPrefix("S") {
seconds = value
}
}
}
return Duration(years: years, months: months, weeks: weeks, days: days, hours: hours, minutes: minutes, seconds: seconds)
}
Durata struct:
public struct Duration {
let daysInMonth: Int = 30
let daysInYear: Int = 365
var years: Int
var months: Int
var weeks: Int
var days: Int
var hours: Int
var minutes: Int
var seconds: Float
public func getMilliseconds() -> Int{
return Int(round(seconds*1000)) + minutes*60*1000 + hours*60*60*1000 + days*24*60*60*1000 + weeks*7*24*60*60*1000 + months*daysInMonth*24*60*60*1000 + years*daysInYear*24*60*60*1000
}
public func getFormattedString() -> String{
var formattedString = ""
if years != 0{
formattedString.append("\(years)")
formattedString.append(" ")
formattedString.append(years == 1 ? "year".localized() : "years".localized())
formattedString.append(" ")
}
if months != 0{
formattedString.append("\(months)")
formattedString.append(" ")
formattedString.append(months == 1 ? "month".localized() : "months".localized())
formattedString.append(" ")
}
if weeks != 0{
formattedString.append("\(weeks)")
formattedString.append(" ")
formattedString.append(weeks == 1 ? "week".localized() : "weeks".localized())
formattedString.append(" ")
}
if days != 0{
formattedString.append("\(days)")
formattedString.append(" ")
formattedString.append(days == 1 ? "day".localized() : "days".localized())
formattedString.append(" ")
}
if seconds != 0{
formattedString.append(String(format: "%02d:%02d:%.02f", hours, minutes, seconds))
}else{
formattedString.append(String(format: "%02d:%02d", hours, minutes))
}
return formattedString
}
}