Tomcat starts without errors but not listening on 8080

Question

I am running tomcat 6 on Centos 6.4 and have started it sucessfully. There were no errors on start. catalina.log reads:

2012-08-11 14:23:42,941 | INFO  | main | o.a.c.http11.Http11NioProtocol | Starting Coyote HTTP/1.1 on http-xx.xx.xx.xx-8080
2012-08-11 14:23:42,960 | INFO  | main | o.a.catalina.startup.Catalina | Server startup in 121483 ms

And ps -x shows it as running.

Unfortunately it is not responding on port 8080 however and netstat -atnp | grep LISTEN does not list it.

Any ideas of what could cause this?

Answer 1

If the problem is that the port is not configured in iptables like Nash suggests, then you can configure it as follows:

vi  /etc/sysconfig/iptables

add the following line to the file:

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

save the file on exit and restart iptables:

service iptables restart

Answer 2

the answer of @alfasin is correct, but for CentOS 6 the comand line down not work

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

You need free chain one by one, this mode:

-I INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT
-I OUTPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT
-I FORWARD -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

Answer 3

It was iptables blocking the port...

A quick way to solve this is to turn off iptables with:

/etc/init.d/iptables save
/etc/init.d/iptables stop

In general iptables should be enabled but configured to open the ports needed. Turning it off without using a replacement is a bad practice.

In my case the machines were not doing anything sensitive and were on an internal network without internet access so turning off iptables was good enough.

Answer 4

I thing following activity will also can be work.But yes, its only for Cent OS. Goto

vi  /etc/sysconfig/iptables

Just add following line and change your port as you want.

-A INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

save the file by pressing esc from keyboard and type :wq Then restart iptables:

service iptables restart

I thing it will be work.