質問
私の仮想マシンの稼働するサーバできないの停止、再起動-どうしてもログインできないので着こなしを停止させることはできない使用にVMwareサーバーソフトである。ありその他のVMの走行でを再起動したホストの質問です。する他に方法はないの強制力機械一台ずつ。
解決
ご利用の場合はWindowsの仮想マシンすべてに、そのプロセスが見える、タスクマネージャー。利用sysinternals ロExplorer の一つとしてkillします。
他のヒント
ばlinuxでのその後をつかんで、ゲストプロセス
ps axuw | grep vmware-vmx
として@Dubas指摘の通り、対応することができるでしょうを取り出してerrantプロセスのパス名のVMD
場合にはできない場合があり停止、またはこの"パワー"のVM.また、既に複数のVmす。この特定プロセスのPIDをつぶしていきます。
Windows7オープンタスクマネージャーに見えるプロセスの名前"vmware-vmx.exe"注の他.
スイッチの性能をタブの"リソースモニター.の拡大を図"ディスクの活動"パネルです。並べ替えるには、"ファイル"をクリックしてください。の適切なvmdkファイルのVMいをつぶしていきます。にあたっては、以下の"Image"欄の"vmware-vmx"プロセスを記載します。注のPIDです。
スイッチの"工程"のタブを殺にPIDです。
このなかに基づく
a)@エスポ'sコメント
b)ことでしたWindowsタスクマネージャーに遊び....
ログインしますのでホストマシン開タスクマネージャーと利用のメニューを追加するPIDカラムのプロセスタブがあります。
に書いてあり、紙とペン)のPIDのひとりのインスタンスvmware-wmx.exe プロセスでやってみることとした。
利用のVMWareコンソール、停止のerrantしました。
私が再開し、その特定のvmware-vmxプロセスに対応したマシンを変えます。
あなたは、これまでのところ、所期の効果.
類似のものを使用WMICコマンドラインを得るプロセスIDとパス:
WMIC /OUTPUT:C:\ProcessList.txt PROCESS get Caption,Commandline,Processid
これは、テキストファイルの各過程とそのパラメータ。検索できるファイルをごVMでファイルのパスをいただいております正しいプロセスIDを終了タスクです。
感謝 http://windowsxp.mvps.org/listproc.htm のための正しいコマンドラインパラメータ。
のためのESXi5まいをssh経由でのvSphereコンソールしてログインを使用するには、次のコマンドのプロセスID
ps -c | grep -i "machine name"
できるデータベース検索システムのプロセスID、プロセス kill
以下のからのVMwareホームページ
電源offの仮想マシンにESXiホスト(1014165) 症状
でこれらの問題:
You cannot power off an ESXi hosted virtual machine.
A virtual machine is not responsive and cannot be stopped or killed.
を利用する"ESXi5.x esxcliコマンドで電源を切った状態で仮想マシン
のesxcliコマンドを使用できる地域や遠隔での電源を切った状態で仮想マシンを走ESXi5.x.詳細については、のesxcli vmコマンドのvSphereコマンドラインインターフェースを参考にした。
Open a console session where the esxcli tool is available, either in the ESXi Shell, the vSphere Management Assistant (vMA), or the location where the vSphere Command-Line Interface (vCLI) is installed.
Get a list of running virtual machines, identified by World ID, UUID, Display Name, and path to the .vmx configuration file, using this command:
esxcli vm process list
Power off one of the virtual machines from the list using this command:
esxcli vm process kill --type=[soft,hard,force] --world-id=WorldNumber
Notes:
Three power-off methods are available. Soft is the most graceful, hard performs an immediate shutdown, and force should be used as a last resort.
Alternate power off command syntax is: esxcli vm process kill -t [soft,hard,force] -w WorldNumber
Repeat Step 2 and validate that the virtual machine is no longer running.
のためのESXiおよ4.1:
Get a list of running virtual machines, identified by World ID, UUID, Display Name, and path to the .vmx configuration file, using this command:
esxcli vms vm list
Power off one of the virtual machines from the list using this command:
esxcli vms vm kill --type=[soft,hard,force] --world-id=WorldNumber"
のためにVmWare fusion、 alt キーがクリックす'を再起動仮想マシンの'