Python/Curses サブウィンドウでテキストをスクロールするにはどうすればよいですか?
質問
Curses を使用する私の Python スクリプトには、テキストが割り当てられたサブウィンがあります。テキストの長さがウィンドウ サイズよりも長くなる可能性があるため、テキストはスクロール可能である必要があります。
Curses ウィンドウには CSS の「オーバーフロー」のような属性はないようです。Python/Curses のドキュメントも、この点に関してはかなり不可解です。
Python を使用してスクロール可能な Curses サブウィンドウをコーディングし、実際にスクロールする方法を知っている人はいますか?
\編集:より正確な質問
解決
それはあまりにも、ウィンドウの内容を移動するには複雑でしたwindow.scrollでOK。その代わり、curses.newpadは私のためにそれをやっています。
パッドを作成します。
mypad = curses.newpad(40,60)
mypad_pos = 0
mypad.refresh(mypad_pos, 0, 5, 5, 10, 60)
そして、あなたはCMDでwindow.getchからの入力に応じて、mypad_posを()増加/減少によりスクロールすることができます:
if cmd == curses.KEY_DOWN:
mypad_pos += 1
mypad.refresh(mypad_pos, 0, 5, 5, 10, 60)
elif cmd == curses.KEY_UP:
mypad_pos -= 1
mypad.refresh(mypad_pos, 0, 5, 5, 10, 60)
他のヒント
そうです、私は(テキストをスクロールするための)パッドの利用方法について少し混乱していましたが、この投稿を読んでもまだ理解できませんでした。特に、コンテンツが既存の「行の配列」であるコンテキストで使用したかったためです。そこで、以下の類似点 (および相違点) を示す小さな例を用意しました。 newpad
そして subpad
:
#!/usr/bin/env python2.7
import curses
# content - array of lines (list)
mylines = ["Line {0} ".format(id)*3 for id in range(1,11)]
import pprint
pprint.pprint(mylines)
def main(stdscr):
hlines = begin_y = begin_x = 5 ; wcols = 10
# calculate total content size
padhlines = len(mylines)
padwcols = 0
for line in mylines:
if len(line) > padwcols: padwcols = len(line)
padhlines += 2 ; padwcols += 2 # allow border
stdscr.addstr("padhlines "+str(padhlines)+" padwcols "+str(padwcols)+"; ")
# both newpad and subpad are <class '_curses.curses window'>:
mypadn = curses.newpad(padhlines, padwcols)
mypads = stdscr.subpad(padhlines, padwcols, begin_y, begin_x+padwcols+4)
stdscr.addstr(str(type(mypadn))+" "+str(type(mypads)) + "\n")
mypadn.scrollok(1)
mypadn.idlok(1)
mypads.scrollok(1)
mypads.idlok(1)
mypadn.border(0) # first ...
mypads.border(0) # ... border
for line in mylines:
mypadn.addstr(padhlines-1,1, line)
mypadn.scroll(1)
mypads.addstr(padhlines-1,1, line)
mypads.scroll(1)
mypadn.border(0) # second ...
mypads.border(0) # ... border
# refresh parent first, to render the texts on top
#~ stdscr.refresh()
# refresh the pads next
mypadn.refresh(0,0, begin_y,begin_x, begin_y+hlines, begin_x+padwcols)
mypads.refresh()
mypads.touchwin()
mypadn.touchwin()
stdscr.touchwin() # no real effect here
#stdscr.refresh() # not here! overwrites newpad!
mypadn.getch()
# even THIS command erases newpad!
# (unless stdscr.refresh() previously):
stdscr.getch()
curses.wrapper(main)
これを実行すると、最初は次のような結果が得られます(newpad
左、 subpad
右):
┌────────────────────────┐ ┌────────────────────────┐
│Line 1 Line 1 Line 1 ───│ │Line 1 Line 1 Line 1 ───│
│Line 2 Line 2 Line 2 │ │Line 2 Line 2 Line 2 │
│Line 3 Line 3 Line 3 │ │Line 3 Line 3 Line 3 │
│Line 4 Line 4 Line 4 │ │Line 4 Line 4 Line 4 │
│Line 5 Line 5 Line 5 │ │Line 5 Line 5 Line 5 │
│Line 6 Line 6 Line 6 │
│Line 7 Line 7 Line 7 │
│Line 8 Line 8 Line 8 │
│Line 9 Line 9 Line 9 │
│Line 10 Line 10 Line 10 │
└────────────────────────┘
いくつかのメモ:
- 両方
newpad
そしてsubpad
幅/高さはコンテンツ (行数/行配列の最大行幅) + 最終的な境界線のスペースに合わせて設定する必要があります。 - どちらの場合も、次のようにして余分な行を許可できます。
scrollok()
- ただし、余分な幅はありません - どちらの場合も、基本的にはパッドの下部にあるラインを「押す」ことになります。その後
scroll()
次のスペースを空けるために - 特別な
refresh
という方法newpad
では、この「コンテンツ全体」の一部のみを画面上に表示できるようになります。subpad
more-less はインスタンス化されたサイズで表示する必要があります - コンテンツ文字列を追加する前にパッドの境界線を描画すると、境界線も上にスクロールします (つまり、
───
で展示されている作品...Line 1 ───│
一部)。
役立つリンク:
設定window.scrollok(真)。
私はいくつかの大きなテキストファイルの表示内容にスクロールパッドを使用していたが、テキストが改行を持つことができるので、これはうまく動作しませんでしたし、収まるようにどのように多くの文字を表示するまでの時間で把握することはかなり大変でした列と行のかなりの数。
行が短すぎた時にだから私は、最初の分割に正確にCOLUMNS文字の行で私のテキストファイル、スペースでパディングを決めました。そして、より簡単になったテキストをスクロールします。
ここで任意のテキストファイルを表示するためのサンプルコードがあります
#!/usr/bin/python
# -*- coding: utf-8 -*-
import curses
import locale
import sys
def main(filename, filecontent, encoding="utf-8"):
try:
stdscr = curses.initscr()
curses.noecho()
curses.cbreak()
curses.curs_set(0)
stdscr.keypad(1)
rows, columns = stdscr.getmaxyx()
stdscr.border()
bottom_menu = u"(↓) Next line | (↑) Previous line | (→) Next page | (←) Previous page | (q) Quit".encode(encoding).center(columns - 4)
stdscr.addstr(rows - 1, 2, bottom_menu, curses.A_REVERSE)
out = stdscr.subwin(rows - 2, columns - 2, 1, 1)
out_rows, out_columns = out.getmaxyx()
out_rows -= 1
lines = map(lambda x: x + " " * (out_columns - len(x)), reduce(lambda x, y: x + y, [[x[i:i+out_columns] for i in xrange(0, len(x), out_columns)] for x in filecontent.expandtabs(4).splitlines()]))
stdscr.refresh()
line = 0
while 1:
top_menu = (u"Lines %d to %d of %d of %s" % (line + 1, min(len(lines), line + out_rows), len(lines), filename)).encode(encoding).center(columns - 4)
stdscr.addstr(0, 2, top_menu, curses.A_REVERSE)
out.addstr(0, 0, "".join(lines[line:line+out_rows]))
stdscr.refresh()
out.refresh()
c = stdscr.getch()
if c == ord("q"):
break
elif c == curses.KEY_DOWN:
if len(lines) - line > out_rows:
line += 1
elif c == curses.KEY_UP:
if line > 0:
line -= 1
elif c == curses.KEY_RIGHT:
if len(lines) - line >= 2 * out_rows:
line += out_rows
elif c == curses.KEY_LEFT:
if line >= out_rows:
line -= out_rows
finally:
curses.nocbreak(); stdscr.keypad(0); curses.echo(); curses.curs_set(1)
curses.endwin()
if __name__ == '__main__':
locale.setlocale(locale.LC_ALL, '')
encoding = locale.getpreferredencoding()
try:
filename = sys.argv[1]
except:
print "Usage: python %s FILENAME" % __file__
else:
try:
with open(filename) as f:
filecontent = f.read()
except:
print "Unable to open file %s" % filename
else:
main(filename, filecontent, encoding)
メインのトリックはラインです。
lines = map(lambda x: x + " " * (out_columns - len(x)), reduce(lambda x, y: x + y, [[x[i:i+out_columns] for i in xrange(0, len(x), out_columns)] for x in filecontent.expandtabs(4).splitlines()]))
まず、テキスト内の集計は、その後、私はラインの配列で私のテキストを変換する分割線()メソッドを使用し、スペースに変換されます。 私はCOLUMNS文字のチャンクに各ラインを分割さして、行のリストで結果のリストを変換するために減らす使用してしかし、いくつかの行は、私たちのCOLUMNS数よりも長くすることができます。 最後に、私は、その長さが正確COLUMNS文字になるように末尾のスペースを用いてパッドに各ラインをマップを使用した。
希望このことができます。
これは、この質問の答えは次のとおりです。 のpython-cursesの中でスクロールメニューを作る方法をする
このコードは、文字列のリストから、ボックスに少しスクロールメニューを作成することができます。
また、SQLiteのクエリからまたはcsvファイルから文字列のリストを取得し、このコードを使用することができます。
メニューの行の最大数を編集するにはあなただけの編集max_row
に持っています。
あなたがプログラムを入力押すと、選択した文字列値とその位置を出力します。
from __future__ import division #You don't need this in Python3
import curses
from math import *
screen = curses.initscr()
curses.noecho()
curses.cbreak()
curses.start_color()
screen.keypad( 1 )
curses.init_pair(1,curses.COLOR_BLACK, curses.COLOR_CYAN)
highlightText = curses.color_pair( 1 )
normalText = curses.A_NORMAL
screen.border( 0 )
curses.curs_set( 0 )
max_row = 10 #max number of rows
box = curses.newwin( max_row + 2, 64, 1, 1 )
box.box()
strings = [ "a", "b", "c", "d", "e", "f", "g", "h", "i", "l", "m", "n" ] #list of strings
row_num = len( strings )
pages = int( ceil( row_num / max_row ) )
position = 1
page = 1
for i in range( 1, max_row + 1 ):
if row_num == 0:
box.addstr( 1, 1, "There aren't strings", highlightText )
else:
if (i == position):
box.addstr( i, 2, str( i ) + " - " + strings[ i - 1 ], highlightText )
else:
box.addstr( i, 2, str( i ) + " - " + strings[ i - 1 ], normalText )
if i == row_num:
break
screen.refresh()
box.refresh()
x = screen.getch()
while x != 27:
if x == curses.KEY_DOWN:
if page == 1:
if position < i:
position = position + 1
else:
if pages > 1:
page = page + 1
position = 1 + ( max_row * ( page - 1 ) )
elif page == pages:
if position < row_num:
position = position + 1
else:
if position < max_row + ( max_row * ( page - 1 ) ):
position = position + 1
else:
page = page + 1
position = 1 + ( max_row * ( page - 1 ) )
if x == curses.KEY_UP:
if page == 1:
if position > 1:
position = position - 1
else:
if position > ( 1 + ( max_row * ( page - 1 ) ) ):
position = position - 1
else:
page = page - 1
position = max_row + ( max_row * ( page - 1 ) )
if x == curses.KEY_LEFT:
if page > 1:
page = page - 1
position = 1 + ( max_row * ( page - 1 ) )
if x == curses.KEY_RIGHT:
if page < pages:
page = page + 1
position = ( 1 + ( max_row * ( page - 1 ) ) )
if x == ord( "\n" ) and row_num != 0:
screen.erase()
screen.border( 0 )
screen.addstr( 14, 3, "YOU HAVE PRESSED '" + strings[ position - 1 ] + "' ON POSITION " + str( position ) )
box.erase()
screen.border( 0 )
box.border( 0 )
for i in range( 1 + ( max_row * ( page - 1 ) ), max_row + 1 + ( max_row * ( page - 1 ) ) ):
if row_num == 0:
box.addstr( 1, 1, "There aren't strings", highlightText )
else:
if ( i + ( max_row * ( page - 1 ) ) == position + ( max_row * ( page - 1 ) ) ):
box.addstr( i - ( max_row * ( page - 1 ) ), 2, str( i ) + " - " + strings[ i - 1 ], highlightText )
else:
box.addstr( i - ( max_row * ( page - 1 ) ), 2, str( i ) + " - " + strings[ i - 1 ], normalText )
if i == row_num:
break
screen.refresh()
box.refresh()
x = screen.getch()
curses.endwin()
exit()