質問

どのようにWindows用のクロスコンパイルDirect3Dのアプリへのconfigure MINGW32か?すべての可能性はありますか? http://www.directxtutorial.com:私は実際にこのチュートリアルからコードをコンパイル成功しました/Tutorial9/B-Direct3DBasics/dx9B4.aspx の - のi586-mingw32msvc-G ++でコード:: Kubuntuの上のブロックを使用しました。私はこれを行うには#define UNICODEを追加し、#pragma ...の部分を削除するために必要な、と私は、ヘッダが、/ usr / i586の-mingw32msvcからファイルを使用/ mingwのパッケージからも含めるとLIBSます。

しかし、私はこのチュートリアルからコンパイルコードすることはできません:のhttp://www.directxtutorial .COM / Tutorial9 / B-Direct3DBasics / dx9B5.aspx

Mingwをはd3dx9.hファイルを持っていません。私は、Windows関連のヘッダファイルのワインのバージョンとwine1.2-devパッケージをインストールしましたが、今、私はエラーを持っているので、ます:

#define UNICODE付きます:

-------------- Build: Debug in d3d ---------------

i586-mingw32msvc-g++ -Wall  -g    -I/usr/include/wine/windows  -c /home/silmeth/programowanie/codeblocks/d3d/main.cpp -o obj/Debug/main.o
/home/silmeth/programowanie/codeblocks/d3d/main.cpp: In function ‘int WinMain(HINSTANCE__*, HINSTANCE__*, CHAR*, int)’:
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:50: error: invalid conversion from ‘const wchar_t*’ to ‘const WCHAR*’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:56: error: invalid conversion from ‘const wchar_t*’ to ‘const WCHAR*’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:56: error:   initializing argument 2 of ‘HWND__* CreateWindowExW(DWORD, const WCHAR*, const WCHAR*, DWORD, INT, INT, INT, INT, HWND__*, HMENU__*, HINSTANCE__*, void*)’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:56: error: invalid conversion from ‘const wchar_t*’ to ‘const WCHAR*’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:56: error:   initializing argument 3 of ‘HWND__* CreateWindowExW(DWORD, const WCHAR*, const WCHAR*, DWORD, INT, INT, INT, INT, HWND__*, HMENU__*, HINSTANCE__*, void*)’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp: In function ‘void render_frame()’:
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:158: warning: taking address of temporary
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:159: warning: taking address of temporary
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:160: warning: taking address of temporary
Process terminated with status 1 (0 minutes, 0 seconds)
5 errors, 3 warnings

そして#defineなします:


-------------- Build: Debug in d3d ---------------

i586-mingw32msvc-g++ -Wall  -g    -I/usr/include/wine/windows  -c /home/silmeth/programowanie/codeblocks/d3d/main.cpp -o obj/Debug/main.o
/home/silmeth/programowanie/codeblocks/d3d/main.cpp: In function ‘int WinMain(HINSTANCE__*, HINSTANCE__*, CHAR*, int)’:
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:50: error: cannot convert ‘const wchar_t [12]’ to ‘const CHAR*’ in assignment
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:56: error: cannot convert ‘const wchar_t*’ to ‘const CHAR*’ for argument ‘2’ to ‘HWND__* CreateWindowExA(DWORD, const CHAR*, const CHAR*, DWORD, INT, INT, INT, INT, HWND__*, HMENU__*, HINSTANCE__*, void*)’
/home/silmeth/programowanie/codeblocks/d3d/main.cpp: In function ‘void render_frame()’:
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:158: warning: taking address of temporary
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:159: warning: taking address of temporary
/home/silmeth/programowanie/codeblocks/d3d/main.cpp:160: warning: taking address of temporary
Process terminated with status 1 (0 minutes, 0 seconds)
2 errors, 3 warnings

ここで私がコンパイルしようとしている全体のコードは次のとおりです。

// include the basic windows header files and the Direct3D header file
#define UNICODE //tried to comment and uncomment this
#include <windows.h>
#include <windowsx.h>
#include <d3d9.h>
#include <d3dx9.h>

// define the screen resolution
#define SCREEN_WIDTH 800
#define SCREEN_HEIGHT 600

// include the Direct3D Library files
//#pragma comment (lib, "d3d9.lib")
//#pragma comment (lib, "d3dx9.lib")

// global declarations
LPDIRECT3D9 d3d;    // the pointer to our Direct3D interface
LPDIRECT3DDEVICE9 d3ddev;    // the pointer to the device class
LPDIRECT3DVERTEXBUFFER9 v_buffer = NULL;    // the pointer to the vertex buffer

// function prototypes
void initD3D(HWND hWnd);    // sets up and initializes Direct3D
void render_frame(void);    // renders a single frame
void cleanD3D(void);    // closes Direct3D and releases memory
void init_graphics(void);    // 3D declarations

struct CUSTOMVERTEX {FLOAT X, Y, Z; DWORD COLOR;};
#define CUSTOMFVF (D3DFVF_XYZ | D3DFVF_DIFFUSE)

// the WindowProc function prototype
LRESULT CALLBACK WindowProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam);


// the entry point for any Windows program
int WINAPI WinMain(HINSTANCE hInstance,
                   HINSTANCE hPrevInstance,
                   LPSTR lpCmdLine,
                   int nCmdShow)
{
    HWND hWnd;
    WNDCLASSEX wc;

    ZeroMemory(&wc, sizeof(WNDCLASSEX));

    wc.cbSize = sizeof(WNDCLASSEX);
    wc.style = CS_HREDRAW | CS_VREDRAW;
    wc.lpfnWndProc = WindowProc;
    wc.hInstance = hInstance;
    wc.hCursor = LoadCursor(NULL, IDC_ARROW);
    wc.lpszClassName = L"WindowClass";

    RegisterClassEx(&wc);

    hWnd = CreateWindowEx(NULL, L"WindowClass", L"Our Direct3D Program",
                          WS_OVERLAPPEDWINDOW, 0, 0, SCREEN_WIDTH, SCREEN_HEIGHT,
                          NULL, NULL, hInstance, NULL);

    ShowWindow(hWnd, nCmdShow);

    // set up and initialize Direct3D
    initD3D(hWnd);

    // enter the main loop:

    MSG msg;

    while(TRUE)
    {
        while(PeekMessage(&msg, NULL, 0, 0, PM_REMOVE))
        {
            TranslateMessage(&msg);
            DispatchMessage(&msg);
        }

        if(msg.message == WM_QUIT)
            break;

        render_frame();
    }

    // clean up DirectX and COM
    cleanD3D();

    return msg.wParam;
}


// this is the main message handler for the program
LRESULT CALLBACK WindowProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
    switch(message)
    {
        case WM_DESTROY:
            {
                PostQuitMessage(0);
                return 0;
            } break;
    }

    return DefWindowProc (hWnd, message, wParam, lParam);
}


// this function initializes and prepares Direct3D for use
void initD3D(HWND hWnd)
{
    d3d = Direct3DCreate9(D3D_SDK_VERSION);

    D3DPRESENT_PARAMETERS d3dpp;

    ZeroMemory(&d3dpp, sizeof(d3dpp));
    d3dpp.Windowed = TRUE;
    d3dpp.SwapEffect = D3DSWAPEFFECT_DISCARD;
    d3dpp.hDeviceWindow = hWnd;
    d3dpp.BackBufferFormat = D3DFMT_X8R8G8B8;
    d3dpp.BackBufferWidth = SCREEN_WIDTH;
    d3dpp.BackBufferHeight = SCREEN_HEIGHT;

    // create a device class using this information and the info from the d3dpp stuct
    d3d->CreateDevice(D3DADAPTER_DEFAULT,
                      D3DDEVTYPE_HAL,
                      hWnd,
                      D3DCREATE_SOFTWARE_VERTEXPROCESSING,
                      &d3dpp,
                      &d3ddev);

    init_graphics();    // call the function to initialize the triangle

    d3ddev->SetRenderState(D3DRS_LIGHTING, FALSE);    // turn off the 3D lighting
}


// this is the function used to render a single frame
void render_frame(void)
{
    d3ddev->Clear(0, NULL, D3DCLEAR_TARGET, D3DCOLOR_XRGB(0, 0, 0), 1.0f, 0);

    d3ddev->BeginScene();

    // select which vertex format we are using
    d3ddev->SetFVF(CUSTOMFVF);

    // SET UP THE PIPELINE

    D3DXMATRIX matRotateY;    // a matrix to store the rotation information

    static float index = 0.0f; index+=0.05f;    // an ever-increasing float value

    // build a matrix to rotate the model based on the increasing float value
    D3DXMatrixRotationY(&matRotateY, index);

    // tell Direct3D about our matrix
    d3ddev->SetTransform(D3DTS_WORLD, &matRotateY);

    D3DXMATRIX matView;    // the view transform matrix

    D3DXMatrixLookAtLH(&matView,
                       &D3DXVECTOR3 (0.0f, 0.0f, 10.0f),    // the camera position
                       &D3DXVECTOR3 (0.0f, 0.0f, 0.0f),    // the look-at position
                       &D3DXVECTOR3 (0.0f, 1.0f, 0.0f));    // the up direction

    d3ddev->SetTransform(D3DTS_VIEW, &matView);    // set the view transform to matView

    D3DXMATRIX matProjection;     // the projection transform matrix

    D3DXMatrixPerspectiveFovLH(&matProjection,
                               D3DXToRadian(45),    // the horizontal field of view
                               (FLOAT)SCREEN_WIDTH / (FLOAT)SCREEN_HEIGHT, // aspect ratio
                               1.0f,    // the near view-plane
                               100.0f);    // the far view-plane

    d3ddev->SetTransform(D3DTS_PROJECTION, &matProjection);    // set the projection

    // select the vertex buffer to display
    d3ddev->SetStreamSource(0, v_buffer, 0, sizeof(CUSTOMVERTEX));

    // copy the vertex buffer to the back buffer
    d3ddev->DrawPrimitive(D3DPT_TRIANGLELIST, 0, 1);

    d3ddev->EndScene();

    d3ddev->Present(NULL, NULL, NULL, NULL);
}


// this is the function that cleans up Direct3D and COM
void cleanD3D(void)
{
    v_buffer->Release();    // close and release the vertex buffer
    d3ddev->Release();    // close and release the 3D device
    d3d->Release();    // close and release Direct3D
}


// this is the function that puts the 3D models into video RAM
void init_graphics(void)
{
    // create the vertices using the CUSTOMVERTEX struct
    CUSTOMVERTEX vertices[] =
    {
        { 3.0f, -3.0f, 0.0f, D3DCOLOR_XRGB(0, 0, 255), },
        { 0.0f, 3.0f, 0.0f, D3DCOLOR_XRGB(0, 255, 0), },
        { -3.0f, -3.0f, 0.0f, D3DCOLOR_XRGB(255, 0, 0), },
    };

    // create a vertex buffer interface called v_buffer
    d3ddev->CreateVertexBuffer(3*sizeof(CUSTOMVERTEX),
                               0,
                               CUSTOMFVF,
                               D3DPOOL_MANAGED,
                               &v_buffer,
                               NULL);

    VOID* pVoid;    // a void pointer

    // lock v_buffer and load the vertices into it
    v_buffer->Lock(0, 0, (void**)&pVoid, 0);
    memcpy(pVoid, vertices, sizeof(vertices));
    v_buffer->Unlock();
}

ドゥ私はワインMSのDirectX SDKによってインストールする必要がありますか?コードで何かを変更しますか?私はDirectX-とWindows関連のものがnoobのだが、私はちょうどD3Dのいくつかの簡単な例をクロスコンパイルして、この作品かどうかを確認したい。

役に立ちましたか?

解決

OK!私は最終的に成功しました!

残念ながら、私は(私はワインと新しいものをインストールすることができませんでした)は、MicrosoftのDirectX SDK(2007年4月)をダウンロードする必要がありました。

その後、私はワインを使用してのMinGWをインストールし、また、mingwの-utilsの0.3をインストールする必要がありました(私はreimp.exeファイルを入手する必要がありました)。

そして、私はC:\windows;C:\windows\system;C:\MinGW\binにワインのレジスタにPATHを設定する

それから私はwine reimp.exe "C:\Program Files\Microsoft DirectX SDK (April 2007)/Lib/x86/d3dx9.lib"を作りました。 d3dx9_33.aファイルを生成し、このコマンドは、私はd3dx9.aにそれを変更し、/usr/i586-mingw32msvc/lib/に入れました。

私も/usr/i586-mingw32msvc/includeへのDirectX SDKからすべての欠けているヘッダファイルをコピーした。

そして...私はlibd3d9.aとlibd3dx9.aにリンク、プログラムをコンパイルし、それがコンパイル、リンク、およびそれが動作!

良いニュースがあるので:。1は、MinGWのLinux版を使用して、LinuxでWindowsのDirectXのプログラムをコンパイルすることができます。

悪いニュース:1のワインを使用して、いくつかのMinGWユーティリティと全体のMS DX SDKをインストールする必要が

編集

そしてもう一つ:私は*手動で関連の鋳物すべてWCHARを作るために必要な - それが行われていない場合は、エラーとmingwの叫びを。ゴズはここに役立ちました。

他のヒント

は、

にあなたの文字列を変更した場合
(const WCHAR*)L"blah blah"

そして、それは、その理想的ではないがコンパイルする必要がありますが、それはwchar_tとWCHARはmingwの下に互換性がありませんようです。私は完全に確認してくださいなぜそれがwchar_t型...

のtypedefのようWINDOWS.H定義WCHARかかわらコンパイルするものではありませんよ

することもできますインスタンスDebianやUbuntuのためにプレーンのMinGWクロスコンパイラ、およびのみのLoadLibrary()とのGetProcAddress()を使用してDirectXのためのコード。 (その後、-あるとしてではなく、DirectXの上のチュートリアルを使用することはできません。)

ライセンス: CC-BY-SA帰属
所属していません StackOverflow
scroll top