I had a similar problem when I did major changes to my Podfile. My solution was to remove the workspace file and run pod install
again:
rm -rf MyProject.xcworkspace
pod install
質問
I'm unable to build a project that uses CocoaPods. I get the following errors:
diff: /../Podfile.lock: No such file or directory
diff: Manifest.lock: No such file or directory error:
The sandbox is not in sync with the Podfile.lock. Run 'pod install' or update your CocoaPods installation.`
$ pod install
seems to work fine and adds a Pods
Project to my Workspace. I've tried $ pod update
but this doesn't help.
It seems that PODS_ROOT
is not being set.
Podfile:
platform :ios, '6.0'
workspace 'Example.xcworkspace'
xcodeproj 'example/Example.xcodeproj'
pod 'TestFlightSDK', '~> 1.3.0-beta.5'
pod 'TestFlightLogger', '~> 0.0.2'
pod 'CocoaLumberjack', '~> 1.6.2'
pod 'Reachability', '~> 3.1.0'
pod 'SBJson', '~> 3.2'
pod 'MKMapViewZoom', '~> 1.0.0'
解決
I had a similar problem when I did major changes to my Podfile. My solution was to remove the workspace file and run pod install
again:
rm -rf MyProject.xcworkspace
pod install
他のヒント
TLDR: This is most likely a bug with Xcode and closing and reopening the project is usually the simplest fix. Assuming everything else is configured properly.
I occasionally get the same error when deleting the Pods
directory and then running pod install
.
Everything appears correct in the project info:
However, when I go to the target's User-Defined Build Settings, the PODS_ROOT entry is either entirely missing or is empty for one or more configurations. Which causes the following error on build:
The simplest fix is to close the project in Xcode and reopen it.
If you go to the target's Build Settings and filter on All, you will now see the PODS_ROOT
entry with no errors:
It should now build with no errors.
Note: Even Cocoa Pods' official AFNetworking iOS Example has this problem, which leads me to believe that it is a bug with Xcode.
An alternative fix is to manually change the configuration to None
, then back to its original value:
Go to the target's Build Settings
and make sure the value of PODS_ROOT
equals ${SRCROOT}/Pods
in "User-Defined" section.
update: a podfile.lock
is necessary and should not be ignored by version control, it keeps track of the versions of libraries installed at a certain pod install. (It's similar to gemfile.lock and composer.lock for rails and php dependency management, respectively). To learn more please read the docs. Credit goes to cbowns.
In my case, what I did was that I was doing some house cleaning for my project (ie branching out the integration tests as a git submodule.. removing duplicate files etc).. and pushed the final result to a git remote repo.. all the clients who cloned my repo suffered from the above error. Inspired by Hlung's comment above, I realized that there were some dangling pod scripts that were attempting to run against some non-existent files. So I went to my target build phase, and deleted all the remaining phases that had anything to do with cocoa pods (and Hlung's comment he suggests deleting Copy Pods Manifest.lock
and copy pod resources
.. mine were named different maybe b/c I'm using Xcode 5.. the point being is to delete those dangling build phases)..
So it seems that CocoaPods didn't set the Configurations for my Project. They need to be based on the Pods.xcconfig
which is found in the Pods/Target Support Files/Pods
. To get this to work I had to do the following:
I then had another build error which may or may not have been related. The path to the shell script defined in the Copy Pods Resources
was incorrect.
"${SRCROOT}/Pods/Pods-resources.sh"
Resolved incorrectly. It seemed that SRCROOT was adding an extra dir that didn't exist into the path. So I hard coded the path to the Project folder.
This allowed me to build.
Why is it that so many things that are supposed to save you time end up eating it up?
Note: Please see @abood's answer for explanation.
I have a similar issue this is what worked:
I got rid of the same problem by doing following steps:
Xcode->Product->Clean Build Folder
(hold alt key on Product to see it)Xcode->Window->Organizer
and select Projects
tab. Then find your project and delete derived data
of the project.Simply resolved by doing the following:
(sudo) gem install cocoapods
pod install
clean and build
it seems the problem was caused by one of our team members having a more recent cocoapods gem installation.
Had the same issue saying /Pods/Pods-resources.sh: No such file or directory even after files etc related to pods were removed.
Got rid of it by going to target->Build phases and then removing the build phase "Copy Pod Resources".
I had the same problem recently. I have tried every possible advice, nothing except this plugin has worked for me:
https://github.com/kylef/cocoapods-deintegrate
After the cleaning up of the current cocoapods integration, what's left to be deleted are Podfile, Podfile.lock and the .xcworkspace. Then just install all over again.
I hope I will help someone with this.
I think it has a bug here.
For me, I delete Pods
folder and Podfile.lock
and do the pod install
again to solve the problem.
This message is ignoring..:(
It wasn't very intuitive. I went to the base project settings and then I hardcoded paths to my pod.lock and pod.manifest under Check Pods Manifest.lock, because they stayed in different folders in fact, so my paths looked like this:
diff "/Users/admin/Desktop/Experimental/projectfolder/Podfile.lock" "/Users/admin/Desktop/Experimental/projectfolder/Pods/Manifest.lock" > /dev/null
if [[ $? != 0 ]] ; then
cat << EOM
error: The sandbox is not in sync with the Podfile.lock. Run 'pod install' or update your CocoaPods installation.
EOM
exit 1
fi
You can try the following. It fixed for me.
The plugins will be remove from cocoapods for your project and will install freshly.
In my case, this was a test target that I removed all the pods from inside my podfile (because I added pods that I later realized I did not need in that target). None of the other solutions here worked for me.
Go to the Build Phases tab in the project settings for the target that's causing trouble.
Delete the section named "Check Pods Manifest" and "Copy Pods Resources"
Inside "Link Binary With Libraries" remove libPods-YourTarget.a
In your project settings in the Info tab expand "Configurations" and set the configuration for the target to None for both debug and release. (This will fix a couple of missing file warnings)
Delete your project's derived data (Window > Projects > Delete [next to your project) and restart Xcode. Build / run target.
This made my day!
pod install
in your project folderI had same problem with the my IONIC project, i tried above all solutions but not luck.
If you have same problem still, check weather below settings are present in Build Settings -> User-Defined settings
or not
1.PODS_ROOT
2.PODS_PODFILE_DIR_PATH
If not present then add it,
PODS_ROOT = ${SRCROOT}/Pods
PODS_PODFILE_DIR_PATH = ${SRCROOT}/
It will solve problem, solution link
In my case the problem was in the wrong way. solution here http://guides.cocoapods.org/using/troubleshooting.html
If something doesn’t seem to work, first of all ensure that you are not completely overriding any options set from the Pods.xcconfig file in your project’s build settings. To add values to options from your project’s build settings, prepend the value list with $(inherited).
I had this issue.
The way I fixed it was by completely deleting the Pod implementing and re-implementing it. Make sure to delete "Copy Pods Resources" and "Check Pods Manifest.lock" from "Build Phases" on all targets as stated here: How to remove CocoaPods from a project?
For me to get rid of this error, I needed to delete the Pods
directory and delete the Podfile.lock
file.
In my case I did put Podfile.lock & Manifest.lock in source control, but I forgot to add Pods-Project.debug(release).xcconfig files to source control (by mistakenly adding *.xcconfig to .gitignore), then I got the same compile errors with exactly the same reason, PODS_ROOT is not being set.
So if the goal is that after cloning the repo, the project can immediately build and run, without having CocoaPods installed on the machine, you either add entire Pods directory in source control or add Podfile.lock, Manifest.lock, project's xcconfig files and Pods xcconfig files to source control.
I didn't put the private .xcconfig that merges the build settings with the default CocoaPods configuration to source control.
I have created multiple targets before I ever used pods. Later when I started to compile the other targets I had to add link_with with the list of targets in my Podfile.
I had the same issue. After retracing my recent steps, I found that adding a target declaration for a new target, followed by running pod install,
was the cause of the problem:
Resetting my branch and cleaning my project did not work, since Cocoapods modified at least one file that is not under source control. I know this because once I reset the remote branch to a commit before adding the extra target, and re-cloned the repo, the problem no longer existed.
If you have a watchOS target: I found that suddenly, having pods in the watch extension but not in the watch target itself broke things with this same error. The solution was to add the pods to the watch target also.
if you added new target after creating Podfile, just delete Podfile, Podfile.lock , Pods folder and workspace then init pods ->then put your pods pod install
After trying the above, I realized I was getting an error on pod install
[!] CocoaPods did not set the base configuration of your project because your project already has a custom config set.
This was causing the error, because cocoapods was not adding the .xcconfig file to my project.
To solve this I went to the Info
tab of my project. Set my Based on Configuration File to None
for all schemes and targets. Then re-ran pod install
See this link for more information. Cocoapods Warning - CocoaPods did not set the base configuration of your project because because your project already has a custom config set
In my case, I accidentally typed an unnecessary dot at the end of the config file which caused this strange problem. Please make sure your config file does not contain any errors!