간단한 수학 표현식 문자열 평가 [닫기]
-
06-09-2019 - |
문제
도전
여기에 도전 과제가 있습니다(내 자신의 발명품이지만 이전에 웹의 다른 곳에서 나타났다고 해도 놀라지 않을 것입니다).
간단한 수학적 표현의 문자열 표현 인 단일 인수를 취하고이를 부동 소수점 값으로 평가하는 함수를 작성하십시오."간단한 표현"에는 다음 중 하나가 포함될 수 있습니다.양수 또는 부정적인 소수점 숫자, +, -, *, /, (, ).표현사용(보통) 중위 표기법.운영자는 나타나는 순서대로 평가되어야합니다. ~ 아니다 에서와 같이 보드마물론 괄호는 올바르게 관찰되어야합니다.함수는 올바른 결과를 반환해야합니다 어느 이 형태의 가능한 표현.그러나이 함수는 기형 표현식을 처리 할 필요가 없습니다 (즉구문이 잘못된 것).
표현의 예:
1 + 3 / -8 = -0.5 (No BODMAS) 2*3*4*5+99 = 219 4 * (9 - 4) / (2 * 6 - 2) + 8 = 10 1 + ((123 * 3 - 69) / 100) = 4 2.45/8.5*9.27+(5*0.0023) = 2.68...
규칙
여기에는 어떤 형태로든 "부정행위"/교활함이 있을 것으로 예상되므로 이에 대해 미리 경고해 주시기 바랍니다!부정행위란 다음의 사용을 의미합니다. eval
또는 JavaScript 또는 PHP와 같은 동적 언어의 동등한 기능, 즉석에서 코드를 동등하게 컴파일하고 실행합니다.(내 생각에는 "BODMAS 없음" 사양이 이를 거의 보장한다고 생각합니다.) 그 외에도 제한 사항은 없습니다.여기에는 몇 가지 Regex 솔루션이 있을 것으로 예상되지만 그 이상을 보는 것도 좋을 것입니다.
이제 저는 주로 C#/.NET 솔루션에 관심이 있지만 다른 언어도 완벽하게 수용 가능합니다(특히 기능적/혼합 접근 방식의 경우 F# 및 Python).나는 가장 짧은 해결책(적어도 언어에 대해서는)을 답으로 받아들일지 여부를 아직 결정하지 않았지만 환영하고 싶습니다. 모든 언어로 된 모든 형태의 솔루션, 위에서 방금 금지한 사항은 제외됩니다!
내 솔루션
이제 C# 솔루션을 게시했습니다. 여기 (403자). 업데이트: 나의 새로운 솔루션 이전 것을 크게 이겼습니다. 294자, 약간의 사랑스러운 정규식의 도움으로!나는 이것이 더 가벼운 구문(특히 기능적/동적 언어)을 사용하는 일부 언어에 의해 쉽게 이길 것이라고 의심했고 이것이 옳다는 것이 입증되었지만 여전히 C#에서 누군가가 이것을 이길 수 있는지 궁금합니다.
업데이트
나는 이미 매우 교묘한 해결책을 보았습니다.게시해 주신 모든 분들께 감사드립니다.아직 테스트하지는 않았지만 사람들을 신뢰하고 최소한 주어진 모든 예제를 사용할 수 있다고 가정하겠습니다.
참고로 재진입(예:스레드 안전성)은 ~ 아니다 기능에 대한 요구 사항이지만 보너스입니다.
체재
쉬운 비교를 위해 모든 답변을 다음 형식으로 게시하십시오.
언어
문자 수:???
완전히 난독화된 기능:
(code here)
명확/반난독화 기능:
(code here)
알고리즘/영리한 단축키에 대한 메모입니다.
해결책
perl (평가 없음)
문자 수 : 167 106 (106 문자 버전은 아래를 참조하십시오)
완전히 난독 화 된 기능 : (167 자이 세 줄에 하나에 결합하면)
sub e{my$_="($_[0])";s/\s//g;$n=q"(-?\d++(\.\d+)?+)";
@a=(sub{$1},1,sub{$3*$6},sub{$3+$6},4,sub{$3-$6},6,sub{$3/$6});
while(s:\($n\)|(?<=\()$n(.)$n:$a[7&ord$5]():e){}$_}
Clear/Deobfuscated 버전 :
sub e {
my $_ = "($_[0])";
s/\s//g;
$n=q"(-?\d++(\.\d+)?+)"; # a regex for "number", including capturing groups
# q"foo" in perl means the same as 'foo'
# Note the use of ++ and ?+ to tell perl
# "no backtracking"
@a=(sub{$1}, # 0 - no operator found
1, # placeholder
sub{$3*$6}, # 2 - ord('*') = 052
sub{$3+$6}, # 3 - ord('+') = 053
4, # placeholder
sub{$3-$6}, # 5 - ord('-') = 055
6, # placeholder
sub{$3/$6}); # 7 - ord('/') = 057
# The (?<=... bit means "find a NUM WHATEVER NUM sequence that happens
# immediately after a left paren", without including the left
# paren. The while loop repeatedly replaces "(" NUM WHATEVER NUM with
# "(" RESULT and "(" NUM ")" with NUM. The while loop keeps going
# so long as those replacements can be made.
while(s:\($n\)|(?<=\()$n(.)$n:$a[7&ord$5]():e){}
# A perl function returns the value of the last statement
$_
}
처음에는 규칙을 잘못 읽었으므로 "Eval"으로 버전을 제출했습니다. 여기에없는 버전이 있습니다.
최신 통찰력은 문자 코드의 마지막 옥탈 숫자를 깨달았을 때 발생했습니다. +
, -
, /
, 그리고 *
다릅니다 ord(undef)
이렇게하면 디스패치 테이블을 설정할 수 있습니다. @a
배열로서 위치에서 코드를 호출합니다. 7 & ord($3)
.
하나 더 캐릭터를 면도 할 분명한 장소가 있습니다 - 변화 q""
~ 안으로 ''
-그러나 그것은 껍질을 잘라 내기가 더 어려워 질 것입니다.
더 짧습니다
문자 수 : 124 106
편집 일시적인 고려하여 이제 124 자로 줄어 듭니다.
sub e{$_=$_[0];s/\s//g;$n=q"(-?\d++(\.\d+)?+)";
1while s:\($n\)|$n(.)$n:($1,1,$3*$6,$3+$6,4,$3-$6,6,$6&&$3/$6)[7&ord$5]:e;$_}
더 짧은
문자 수 : 110 106
아래의 루비 솔루션은 104 자에 도달 할 수는 없지만 더 나아가고 있습니다.
sub e{($_)=@_;$n='( *-?[.\d]++ *)';
s:\($n\)|$n(.)$n:(($1,$2-$4,$4&&$2/$4,$2*$4,$2+$4)x9)[.8*ord$3]:e?e($_):$_}
나는주고 사용해야했다 ''
. 그 루비 send
트릭은이 문제에 정말 유용합니다.
돌에서 물을 압박합니다
문자 수 : 106
영역별로의 구분을 피하기위한 작은 경연.
sub e{($_)=@_;$n='( *-?[.\d]++ *)';
s:\($n\)|$n(.)$n:($1,0,$2*$4,$2+$4,0,$2-$4)[7&ord$3]//$2/$4:e?e($_):$_}
이 기능의 테스트 하네스는 다음과 같습니다.
perl -le 'sub e{($_)=@_;$n='\''( *-?[.\d]++ *)'\'';s:\($n\)|$n(.)$n:($1,0,$2*$4,$2+$4,0,$2-$4)[7&ord$3]//$2/$4:e?e($_):$_}' -e 'print e($_) for @ARGV' '1 + 3' '1 + ((123 * 3 - 69) / 100)' '4 * (9 - 4) / (2 * 6 - 2) + 8' '2*3*4*5+99' '2.45/8.5*9.27+(5*0.0023) ' '1 + 3 / -8'
다른 팁
어셈블러
427 바이트
난독 화 된, 우수한 것으로 조립 A86 .com 실행 파일로 :
dd 0db9b1f89h, 081bee3h, 0e8af789h, 0d9080080h, 0bdac7674h, 013b40286h
dd 07400463ah, 0ccfe4508h, 08ce9f675h, 02fc8000h, 013b0057eh, 0feaac42ah
dd 0bedf75c9h, 0ba680081h, 04de801h, 04874f73bh, 04474103ch, 0e8e8b60fh
dd 08e8a003fh, 0e880290h, 0de0153h, 08b57e6ebh, 0d902a93eh, 046d891dh
dd 08906c783h, 05f02a93eh, 03cffcee8h, 057197510h, 02a93e8bh, 08b06ef83h
dd 05d9046dh, 02a93e89h, 03bc9d95fh, 0ac0174f7h, 074f73bc3h, 0f3cac24h
dd 0eed9c474h, 0197f0b3ch, 07cc4940fh, 074f73b09h, 0103cac09h, 0a3ce274h
dd 0e40a537eh, 0e0d90274h, 02a3bac3h, 021cd09b4h, 03e8b20cdh, 0ff8102a9h
dd 0ed7502abh, 0474103ch, 0e57d0b3ch, 0be02a3bfh, 014d903a3h, 0800344f6h
dd 02db00574h, 0d9e0d9aah, 0d9029f2eh, 0bb34dfc0h, 08a0009h, 01c75f0a8h
dd 020750fa8h, 0b0f3794bh, 021e9aa30h, 0de607400h, 08802990eh, 0de07df07h
dd 0c392ebc1h, 0e8c0008ah, 0aa300404h, 0f24008ah, 04baa3004h, 02eb0ee79h
dd 03005c6aah, 0c0d90ab1h, 0e9defcd9h, 02a116deh, 0e480e0dfh, 040fc8045h
dd 0ede1274h, 0c0d90299h, 015dffcd9h, 047300580h, 0de75c9feh, 0303d804fh
dd 03d80fa74h, 04f01752eh, 0240145c6h, 0dfff52e9h, 0d9029906h, 0f73b025fh
dd 03caca174h, 07fed740ah, 0df07889ah, 0277d807h, 047d9c1deh, 0990ede02h
dd 025fd902h, 03130e0ebh, 035343332h, 039383736h, 02f2b2d2eh, 02029282ah
dd 0e9000a09h, 07fc9f9c1h, 04500000fh, 0726f7272h
db 024h, 0abh, 02h
편집하다: 흡입되지 않은 소스 :
mov [bx],bx
finit
mov si,81h
mov di,si
mov cl,[80h]
or cl,bl
jz ret
l1:
lodsb
mov bp,d1
mov ah,19
l2:
cmp al,[bp]
je l3
inc bp
dec ah
jne l2
jmp exit
l3:
cmp ah,2
jle l4
mov al,19
sub al,ah
stosb
l4:
dec cl
jnz l1
mov si,81h
push done
decode:
l5:
call l7
l50:
cmp si,di
je ret
cmp al,16
je ret
db 0fh, 0b6h, 0e8h ; movzx bp,al
call l7
mov cl,[bp+op-11]
mov byte ptr [sm1],cl
db 0deh
sm1:db ?
jmp l50
open:
push di
mov di,word ptr [s]
fstp dword ptr [di]
mov [di+4],bp
add di,6
mov word ptr [s],di
pop di
call decode
cmp al,16
jne ret
push di
mov di,word ptr [s]
sub di,6
mov bp,[di+4]
fld dword ptr [di]
mov word ptr [s],di
pop di
fxch st(1)
cmp si,di
je ret
lodsb
ret
l7: cmp si,di
je exit
lodsb
cmp al,15
je open
fldz
cmp al,11
jg exit
db 0fh, 94h, 0c4h ; sete ah
jl l10
l9:
cmp si,di
je l12
lodsb
cmp al,16
je ret
l10:
cmp al,10
jle l12i
l12:
or ah,ah
je l13
fchs
l13:
ret
exit:
mov dx,offset res
mov ah,9
int 21h
int 20h
done:
mov di,word ptr [s]
cmp di,(offset s)+2
jne exit
cmp al,16
je ok
cmp al,11
jge exit
ok:
mov di,res
mov si,res+100h
fst dword ptr [si]
test byte ptr [si+3],80h
jz pos
mov al,'-'
stosb
fchs
pos:
fldcw word ptr [cw]
fld st(0)
fbstp [si]
mov bx,9
l1000:
mov al,[si+bx]
test al,0f0h
jne startu
test al,0fh
jne startl
dec bx
jns l1000
mov al,'0'
stosb
jmp frac
l12i:
je l11
fimul word ptr [d3]
mov [bx],al
fild word ptr [bx]
faddp
jmp l9
ret
startu:
mov al,[si+bx]
shr al,4
add al,'0'
stosb
startl:
mov al,[si+bx]
and al,0fh
add al,'0'
stosb
dec bx
jns startu
frac:
mov al,'.'
stosb
mov byte ptr [di],'0'
mov cl,10
fld st(0)
frndint
frac1:
fsubp st(1)
ficom word ptr [zero]
fstsw ax
and ah,045h
cmp ah,040h
je finished
fimul word ptr [d3]
fld st(0)
frndint
fist word ptr [di]
add byte ptr [di],'0'
inc di
dec cl
jnz frac1
finished:
dec di
cmp byte ptr [di],'0'
je finished
cmp byte ptr [di],'.'
jne f2
dec di
f2:
mov byte ptr [di+1],'$'
exit2:
jmp exit
l11:
fild word ptr [d3]
fstp dword ptr [bx+2]
l111:
cmp si,di
je ret
lodsb
cmp al,10
je exit2
jg ret
mov [bx],al
fild word ptr [bx]
fdiv dword ptr [bx+2]
faddp
fld dword ptr [bx+2]
fimul word ptr [d3]
fstp dword ptr [bx+2]
jmp l111
d1: db '0123456789.-+/*()', 32, 9
d3: dw 10
op: db 0e9h, 0c1h, 0f9h, 0c9h
cw: dw 0f7fh
zero: dw 0
res:db 'Error$'
s: dw (offset s)+2
루비
문자 수:103
N='( *-?[\d.]+ *)'
def e x
x.sub!(/\(#{N}\)|#{N}([^.\d])#{N}/){$1or(e$2).send$3,e($4)}?e(x):x.to_f
end
이것은 비재귀적 The Wicked Flea의 솔루션 버전입니다.괄호로 묶인 하위 표현식은 하향식이 아닌 상향식으로 평가됩니다.
편집하다:'while'을 조건부 + 꼬리 재귀로 변환하면 문자 몇 개가 절약되므로 더 이상 비재귀적이지 않습니다(재귀가 의미상 필요하지는 않지만).
편집하다:정규 표현식을 병합하려는 Daniel Martin의 아이디어를 빌려 11자를 더 절약할 수 있습니다!
편집하다:그 재귀는 제가 처음 생각했던 것보다 훨씬 더 유용합니다! x.to_f
다음과 같이 다시 작성할 수 있습니다. e(x)
, 만약에 x
단일 숫자가 포함되어 있습니다.
편집하다:'를 사용하여or
' 대신에 '||
'를 사용하면 한 쌍의 괄호를 삭제할 수 있습니다.
긴 버전:
# Decimal number, as a capturing group, for substitution
# in the main regexp below.
N='( *-?[\d.]+ *)'
# The evaluation function
def e(x)
matched = x.sub!(/\(#{N}\)|#{N}([^\d.])#{N}/) do
# Group 1 is a numeric literal in parentheses. If this is present then
# just return it.
if $1
$1
# Otherwise, $3 is an operator symbol and $2 and $4 are the operands
else
# Recursively call e to parse the operands (we already know from the
# regexp that they are numeric literals, and this is slightly shorter
# than using :to_f)
e($2).send($3, e($4))
# We could have converted $3 to a symbol ($3.to_s) or converted the
# result back to string form, but both are done automatically anyway
end
end
if matched then
# We did one reduction. Now recurse back and look for more.
e(x)
else
# If the string doesn't look like a non-trivial expression, assume it is a
# string representation of a real number and attempt to parse it
x.to_f
end
end
C (VS2005)
문자 수 : 1360
전 처리기 남용 및 재미있는 코드 레이아웃에 대한 경고 (아래로 스크롤) :
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define b main
#define c(a) b(a,0)
#define d -1
#define e -2
#define g break
#define h case
#define hh h
#define hhh h
#define w(i) case i
#define i return
#define j switch
#define k float
#define l realloc
#define m sscanf
#define n int _
#define o char
#define t(u) #u
#define q(r) "%f" t(r) "n"
#define s while
#define v default
#define ex exit
#define W printf
#define x fn()
#define y strcat
#define z strcpy
#define Z strlen
char*p =0 ;k *b (n,o** a){k*f
;j(_){ hh e: i* p==40? (++p,c
(d )) :( f= l( 0,
4) ,m (p ,q (% ),
f,&_), p+=_ ,f ); hh
d:f=c( e);s (1 ){ j(
*p ++ ){ hh 0: hh
41 :i f; hh 43 :*
f+=*c( e) ;g ;h 45:*f= *f-*c(
e);g;h 42 :* f= *f**c( e);g;h
47:*f /=*c (e); g; v: c(0);}
}w(1): if(p&& printf (q (( "\\"))
,* c( d) )) g; hh 0: ex (W
(x )) ;v :p =( p?y: z)(l(p
,Z(1[ a] )+ (p ?Z(p )+
1:1)) ,1 [a ]) ;b (_ -1 ,a
+1 ); g; }i 0;};fn () {n =42,p=
43 ;i "Er" "ro" t( r) "\n";}
Visual Basic.net
문자 수 : 9759
나는 나 자신이 더 가중 선수에있다.
참고 : 중첩 괄호를 고려하지 않습니다. 또한 테스트되지 않았지만 작동한다고 확신합니다.
Imports Microsoft.VisualBasic
Imports System.Text
Imports System.Collections.Generic
Public Class Main
Public Shared Function DoArithmaticFunctionFromStringInput(ByVal MathematicalString As String) As Double
Dim numberList As New List(Of Number)
Dim operationsList As New List(Of IOperatable)
Dim currentNumber As New Number
Dim currentParentheticalStatement As New Parenthetical
Dim isInParentheticalMode As Boolean = False
Dim allCharactersInString() As Char = MathematicalString.ToCharArray
For Each mathChar In allCharactersInString
If mathChar = Number.ZERO_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.ONE_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.TWO_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.THREE_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.FOUR_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.FIVE_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.SIX_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.SEVEN_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.EIGHT_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.NINE_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Number.DECIMAL_POINT_STRING_REPRESENTATION Then
currentNumber.UpdateNumber(mathChar)
ElseIf mathChar = Addition.ADDITION_STRING_REPRESENTATION Then
Dim addition As New Addition
If Not isInParentheticalMode Then
operationsList.Add(addition)
numberList.Add(currentNumber)
Else
currentParentheticalStatement.AllNumbers.Add(currentNumber)
currentParentheticalStatement.AllOperators.Add(addition)
End If
currentNumber = New Number
ElseIf mathChar = Number.NEGATIVE_NUMBER_STRING_REPRESENTATION Then
If currentNumber.StringOfNumbers.Length > 0 Then
currentNumber.UpdateNumber(mathChar)
Dim subtraction As New Addition
If Not isInParentheticalMode Then
operationsList.Add(subtraction)
numberList.Add(currentNumber)
Else
currentParentheticalStatement.AllNumbers.Add(currentNumber)
currentParentheticalStatement.AllOperators.Add(subtraction)
End If
currentNumber = New Number
Else
currentNumber.UpdateNumber(mathChar)
End If
ElseIf mathChar = Multiplication.MULTIPLICATION_STRING_REPRESENTATION Then
Dim multiplication As New Multiplication
If Not isInParentheticalMode Then
operationsList.Add(multiplication)
numberList.Add(currentNumber)
Else
currentParentheticalStatement.AllNumbers.Add(currentNumber)
currentParentheticalStatement.AllOperators.Add(multiplication)
End If
currentNumber = New Number
ElseIf mathChar = Division.DIVISION_STRING_REPRESENTATION Then
Dim division As New Division
If Not isInParentheticalMode Then
operationsList.Add(division)
numberList.Add(currentNumber)
Else
currentParentheticalStatement.AllNumbers.Add(currentNumber)
currentParentheticalStatement.AllOperators.Add(division)
End If
currentNumber = New Number
ElseIf mathChar = Parenthetical.LEFT_PARENTHESIS_STRING_REPRESENTATION Then
isInParentheticalMode = True
ElseIf mathChar = Parenthetical.RIGHT_PARENTHESIS_STRING_REPRESENTATION Then
currentNumber = currentParentheticalStatement.EvaluateParentheticalStatement
numberList.Add(currentNumber)
isInParentheticalMode = False
End If
Next
Dim result As Double = 0
Dim operationIndex As Integer = 0
For Each numberOnWhichToPerformOperations As Number In numberList
result = operationsList(operationIndex).PerformOperation(result, numberOnWhichToPerformOperations)
operationIndex = operationIndex + 1
Next
Return result
End Function
Public Class Number
Public Const DECIMAL_POINT_STRING_REPRESENTATION As Char = "."
Public Const NEGATIVE_NUMBER_STRING_REPRESENTATION As Char = "-"
Public Const ZERO_STRING_REPRESENTATION As Char = "0"
Public Const ONE_STRING_REPRESENTATION As Char = "1"
Public Const TWO_STRING_REPRESENTATION As Char = "2"
Public Const THREE_STRING_REPRESENTATION As Char = "3"
Public Const FOUR_STRING_REPRESENTATION As Char = "4"
Public Const FIVE_STRING_REPRESENTATION As Char = "5"
Public Const SIX_STRING_REPRESENTATION As Char = "6"
Public Const SEVEN_STRING_REPRESENTATION As Char = "7"
Public Const EIGHT_STRING_REPRESENTATION As Char = "8"
Public Const NINE_STRING_REPRESENTATION As Char = "9"
Private _isNegative As Boolean
Public ReadOnly Property IsNegative() As Boolean
Get
Return _isNegative
End Get
End Property
Public ReadOnly Property ActualNumber() As Double
Get
Dim result As String = ""
If HasDecimal Then
If DecimalIndex = StringOfNumbers.Length - 1 Then
result = StringOfNumbers.ToString
Else
result = StringOfNumbers.Insert(DecimalIndex, DECIMAL_POINT_STRING_REPRESENTATION).ToString
End If
Else
result = StringOfNumbers.ToString
End If
If IsNegative Then
result = NEGATIVE_NUMBER_STRING_REPRESENTATION & result
End If
Return CType(result, Double)
End Get
End Property
Private _hasDecimal As Boolean
Public ReadOnly Property HasDecimal() As Boolean
Get
Return _hasDecimal
End Get
End Property
Private _decimalIndex As Integer
Public ReadOnly Property DecimalIndex() As Integer
Get
Return _decimalIndex
End Get
End Property
Private _stringOfNumbers As New StringBuilder
Public ReadOnly Property StringOfNumbers() As StringBuilder
Get
Return _stringOfNumbers
End Get
End Property
Public Sub UpdateNumber(ByVal theDigitToAppend As Char)
If IsNumeric(theDigitToAppend) Then
Me._stringOfNumbers.Append(theDigitToAppend)
ElseIf theDigitToAppend = DECIMAL_POINT_STRING_REPRESENTATION Then
Me._hasDecimal = True
Me._decimalIndex = Me._stringOfNumbers.Length
ElseIf theDigitToAppend = NEGATIVE_NUMBER_STRING_REPRESENTATION Then
Me._isNegative = Not Me._isNegative
End If
End Sub
Public Shared Function ConvertDoubleToNumber(ByVal numberThatIsADouble As Double) As Number
Dim numberResult As New Number
For Each character As Char In numberThatIsADouble.ToString.ToCharArray
numberResult.UpdateNumber(character)
Next
Return numberResult
End Function
End Class
Public MustInherit Class Operation
Protected _firstnumber As New Number
Protected _secondnumber As New Number
Public Property FirstNumber() As Number
Get
Return _firstnumber
End Get
Set(ByVal value As Number)
_firstnumber = value
End Set
End Property
Public Property SecondNumber() As Number
Get
Return _secondnumber
End Get
Set(ByVal value As Number)
_secondnumber = value
End Set
End Property
End Class
Public Interface IOperatable
Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double
End Interface
Public Class Addition
Inherits Operation
Implements IOperatable
Public Const ADDITION_STRING_REPRESENTATION As String = "+"
Public Sub New()
End Sub
Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
Dim result As Double = 0
result = number1 + number2.ActualNumber
Return result
End Function
End Class
Public Class Multiplication
Inherits Operation
Implements IOperatable
Public Const MULTIPLICATION_STRING_REPRESENTATION As String = "*"
Public Sub New()
End Sub
Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
Dim result As Double = 0
result = number1 * number2.ActualNumber
Return result
End Function
End Class
Public Class Division
Inherits Operation
Implements IOperatable
Public Const DIVISION_STRING_REPRESENTATION As String = "/"
Public Const DIVIDE_BY_ZERO_ERROR_MESSAGE As String = "I took a lot of time to write this program. Please don't be a child and try to defile it by dividing by zero. Nobody thinks you are funny."
Public Sub New()
End Sub
Public Function PerformOperation(ByVal number1 As Double, ByVal number2 As Number) As Double Implements IOperatable.PerformOperation
If Not number2.ActualNumber = 0 Then
Dim result As Double = 0
result = number1 / number2.ActualNumber
Return result
Else
Dim divideByZeroException As New Exception(DIVIDE_BY_ZERO_ERROR_MESSAGE)
Throw divideByZeroException
End If
End Function
End Class
Public Class Parenthetical
Public Const LEFT_PARENTHESIS_STRING_REPRESENTATION As String = "("
Public Const RIGHT_PARENTHESIS_STRING_REPRESENTATION As String = ")"
Private _allNumbers As New List(Of Number)
Public Property AllNumbers() As List(Of Number)
Get
Return _allNumbers
End Get
Set(ByVal value As List(Of Number))
_allNumbers = value
End Set
End Property
Private _allOperators As New List(Of IOperatable)
Public Property AllOperators() As List(Of IOperatable)
Get
Return _allOperators
End Get
Set(ByVal value As List(Of IOperatable))
_allOperators = value
End Set
End Property
Public Sub New()
End Sub
Public Function EvaluateParentheticalStatement() As Number
Dim result As Double = 0
Dim operationIndex As Integer = 0
For Each numberOnWhichToPerformOperations As Number In AllNumbers
result = AllOperators(operationIndex).PerformOperation(result, numberOnWhichToPerformOperations)
operationIndex = operationIndex + 1
Next
Dim numberToReturn As New Number
numberToReturn = Number.ConvertDoubleToNumber(result)
Return numberToReturn
End Function
End Class
End Class
Haskell
문자 수 : 182
영리에 대한 시도는없고, 약간의 압축 : 4 줄, 312 바이트.
import Data.Char;import Text.ParserCombinators.Parsec
q=either(error.show)id.runParser t id"".filter(' '/=);t=do
s<-getState;a<-fmap read(many1$oneOf".-"<|>digit)<|>between(char '('>>setState id)(char ')'>>setState s)t
option(s a)$choice(zipWith(\c o->char c>>return(o$s a))"+-*/"[(+),(-),(*),(/)])>>=setState>>t
그리고 지금, 실제로 골프 정신, 3 줄 및 182 바이트에 들어갑니다.
q=snd.(`e`id).filter(' '/=)
e s c|[(f,h)]<-readsPrec 0 s=g h(c f);e('(':s)c=g h(c f)where(')':h,f)=e s id
g('+':h)=e h.(+);g('-':h)=e h.(-);g('*':h)=e h.(*);g('/':h)=e h.(/);g h=(,)h
폭발 :
-- Strip spaces from the input, evaluate with empty accumulator,
-- and output the second field of the result.
q :: String -> Double
q = snd . flip eval id . filter (not . isSpace)
-- eval takes a string and an accumulator, and returns
-- the final value and what’s left unused from the string.
eval :: (Fractional a, Read a) => String -> (a -> a) -> (String, a)
-- If the beginning of the string parses as a number, add it to the accumulator,
-- then try to read an operator and further.
eval str accum | [(num, rest)] <- readsPrec 0 str = oper rest (accum num)
-- If the string starts parentheses, evaluate the inside with a fresh
-- accumulator, and continue after the closing paren.
eval ('(':str) accum = oper rest (accum num) where (')':rest, num) = eval str id
-- oper takes a string and current value, and tries to read an operator
-- to apply to the value. If there is none, it’s okay.
oper :: (Fractional a, Read a) => String -> a -> (String, a)
-- Handle operations by giving eval a pre-seeded accumulator.
oper ('+':str) num = eval str (num +)
oper ('-':str) num = eval str (num -)
oper ('*':str) num = eval str (num *)
oper ('/':str) num = eval str (num /)
-- If there’s no operation parsable, just return.
oper str num = (str, num)
파이썬
문자 수 : 237
완전히 난독 화 된 기능 :
from operator import*
def e(s,l=[]):
if s:l+=list(s.replace(' ','')+')')
a=0;o=add;d=dict(zip(')*+-/',(0,mul,o,sub,div)));p=l.pop
while o:
c=p(0)
if c=='(':c=e(0)
while l[0]not in d:c+=p(0)
a=o(a,float(c));o=d[p(0)]
return a
Clear/Semi-fpuscated 기능 :
import operator
def calc(source, stack=[]):
if source:
stack += list(source.replace(' ', '') + ')')
answer = 0
ops = {
')': 0,
'*': operator.mul,
'+': operator.add,
'-': operator.sub,
'/': operator.div,
}
op = operator.add
while op:
cur = stack.pop(0)
if cur == '(':
cur = calc(0)
while stack[0] not in ops:
cur += stack.pop(0)
answer = op(answer, float(cur))
op = ops[stack.pop(0)]
return answer
Fortran 77(gfortran 방언, 이제 g77 지원)
문자 수: 2059
난독화된 버전:
function e(c)
character*99 c
character b
real f(24)
integer i(24)
nf=0
ni=0
20 nf=kf(0.0,nf,f)
ni=ki(43,ni,i)
30 if (isp(c).eq.1) goto 20
h=fr(c)
31 g=fp(nf,f)
j=ip(ni,i)
select case(j)
case (40)
goto 20
case (42)
d=g*h
case (43)
d=g+h
case (45)
d=g-h
case (47)
d=g/h
end select
50 nf=kf(d,nf,f)
60 j=nop(c)
goto (20, 70, 75, 75, 60, 75, 60, 75) (j-39)
65 e=fp(nf,f)
return
70 h=fp(nf,f)
goto 31
75 ni=ki(j,ni,i)
goto 30
end
function kf(v,n,f)
real f(24)
kf=n+1
f(n+1)=v
return
end
function ki(j,n,i)
integer i(24)
ki=n+1
i(n+1)=j
return
end
function fp(n,f)
real f(24)
fp=f(n)
n=n-1
return
end
function ip(n,i)
integer i(24)
ip=i(n)
n=n-1
return
end
function nop(s)
character*99 s
l=1
do while(s(l:l).eq." ".and.l.lt.99)
l=l+1
enddo
nop=ichar(s(l:l))
s(l:l)=" "
return
end
function isp(s)
character*99 s
isp=0
l=1
do while(s(l:l).eq." ".and.l.lt.99)
l=l+1
enddo
isp=41-ichar(s(l:l))
if (isp.eq.1) s(l:l)=" "
return
end
function fr(s)
character*99 s
m=1
n=1
i=1
do while(i.le.99)
j=ichar(s(i:i))
if (j.eq.32) goto 90
if (j.ge.48.and.j.lt.58) goto 89
if (j.eq.43.or.j.eq.45) goto (89,80) m
if (j.eq.46) goto (83,80) n
80 exit
83 n=2
89 m=2
90 i=i+1
enddo
read(s(1:i-1),*) fr
do 91 j=1,i-1
s(j:j)=" "
91 continue
return
end
클리어 버전: (비계 포함 3340자)
program infixeval
character*99 c
do while (.true.)
do 10 i=1,99
c(i:i)=" "
10 continue
read(*,"(A99)") c
f=e(c)
write(*,*)f
enddo
end
function e(c)
character*99 c
character b
real f(24) ! value stack
integer i(24) ! operator stack
nf=0 ! number of items on the value stack
ni=0 ! number of items on the operator stack
20 nf=pushf(0.0,nf,f)
ni=pushi(43,ni,i) ! ichar(+) = 43
D write (*,*) "'",c,"'"
30 if (isp(c).eq.1) goto 20
h=fr(c)
D write (*,*) "'",c,"'"
31 g=fpop(nf,f)
j=ipop(ni,i)
D write(*,*) "Opperate ",g," ",char(j)," ",h
select case(j)
case (40)
goto 20
case (42) ! "*"
d=g*h
case (43) ! "+"
d=g+h
case (45) ! "-"
d=g-h
case (47) ! "*"
d=g/h
end select
50 nf=pushf(d,nf,f)
60 j=nop(c)
D write(*,*) "Got op: ", char(j)
goto (20, 70, 75, 75, 60, 75, 60, 75) (j-39)
65 e=fpop(nf,f)
return
70 h=fpop(nf,f) ! Encountered a "("
goto 31
75 ni=pushi(j,ni,i)
goto 30
end
c push onto a real stack
c OB as kf
function pushf(v,n,f)
real f(24)
pushf=n+1
f(n+1)=v
D write(*,*) "Push ", v
return
end
c push onto a integer stack
c OB as ki
function pushi(j,n,i)
integer i(24)
pushi=n+1
i(n+1)=j
D write(*,*) "Push ", char(j)
return
end
c pop from real stack
c OB as fp
function fpop(n,f)
real f(24)
fpop=f(n)
n=n-1
D write (*,*) "Pop ", fpop
return
end
c pop from integer stack
c OB as ip
function ipop(n,i)
integer i(24)
ipop=i(n)
n=n-1
D write (*,*) "Pop ", char(ipop)
return
end
c Next OPerator: returns the next nonws character, and removes it
c from the string
function nop(s)
character*99 s
l=1
do while(s(l:l).eq." ".and.l.lt.99)
l=l+1
enddo
nop=ichar(s(l:l))
s(l:l)=" "
return
end
c IS an open Paren: return 1 if the next non-ws character is "("
c (also overwrite it with a space. Otherwise return not 1
function isp(s)
character*99 s
isp=0
l=1
do while(s(l:l).eq." ".and.l.lt.99)
l=l+1
enddo
isp=41-ichar(s(l:l))
if (isp.eq.1) s(l:l)=" "
return
end
c Float Read: return the next real number in the string and removes the
c character
function fr(s)
character*99 s
m=1 ! No sign (Minus or plus) so far
n=1 ! No decimal so far
i=1
do while(i.le.99)
j=ichar(s(i:i))
if (j.eq.32) goto 90 ! skip spaces
if (j.ge.48.and.j.lt.58) goto 89
if (j.eq.43.or.j.eq.45) goto (89,80) m
if (j.eq.46) goto (83,80) n
c not part of a number
80 exit
83 n=2
89 m=2
90 i=i+1
enddo
read(s(1:i-1),*) fr
do 91 j=1,i-1
s(j:j)=" "
91 continue
return
end
노트 이번 편집 버전은 제가 처음 시도한 것보다 오히려 더 사악합니다.동일한 알고리즘이지만 이제 끔찍한 얽힘이 발생합니다. goto
에스.저는 코루틴을 버렸지만 지금은 몇 가지 종류의 계산된 브랜치를 사용하고 있습니다.모든 오류 확인 및 보고가 제거되었지만 이 버전은 입력에서 예상치 못한 문자의 일부 클래스를 자동으로 복구합니다.이 버전은 g77로도 컴파일됩니다.
주요 한계는 여전히 포트란의 엄격한 형식, 길고 어디에나 존재하는 키워드, 간단한 기본 요소입니다.
C99
문자 수 : 239 (그러나 아래를 참조하십시오 209)
압축 기능 :
#define S while(*e==32)++e
#define F float
F strtof();char*e;F v();F g(){S;return*e++-40?strtof(e-1,&e):v();}F v(){F b,a=g();for(;;){S;F o=*e++;if(!o|o==41)return a;b=g();a=o==43?a+b:o==45?a-b:o==42?a*b:a/b;}}F f(char*x){e=x;return v();}
압축 압축 기능 :
float strtof();
char* e;
float v();
float g() {
while (*e == ' ') ++e;
return *e++ != '(' ? strtof(e-1, &e) : v();
}
float v() {
float b, a = g();
for (;;) {
while (*e == ' ') ++e;
float op = *e++;
if (op == 0 || op == ')') return a;
b = g();
a = op == '+' ? a + b : op == '-' ? a - b : op == '*' ? a * b : a / b;
}
}
float eval(char* x) {
e = x;
return v();
}
기능은 재입국이 아닙니다.
Chris Lutz에서 편집: 나는 다른 사람의 코드를 짓밟는 것을 싫어하지만 여기에 209-문자 버전 :
#define S for(;*e==32;e++)
#define X (*e++-40?strtof(e-1,&e):v())
float strtof();char*e;float v(){float o,a=X;for(;;){S;o=*e++;if(!o|o==41)return a;S;a=o-43?o-45?o-42?a/X:a*X:a-X:a+X;}}
#define f(x) (e=x,v())
읽기 쉽습니다 (실제로 읽기 쉽지 않지만 압축 압축) :
float strtof();
char *e;
float v() {
float o, a = *e++ != '(' ? strtof(e - 1, &e) : v();
for(;;) {
for(; *e == ' '; e++);
o = *e++;
if(o == 0 || o==')') return a;
for(; *e == ' '; e++);
// I have no idea how to properly indent nested conditionals
// and this is far too long to fit on one line.
a = o != '+' ?
o != '-' ?
o != '*' ?
a / (*e++ != '(' ? strtof(e - 1, &e) : v()) :
a * (*e++ != '(' ? strtof(e - 1, &e) : v()) :
a - (*e++ != '(' ? strtof(e - 1, &e) : v()) :
a + (*e++ != '(' ? strtof(e - 1, &e) : v());
}
}
#define f(x) (e = x, v())
응, f()
기능이 아닌 매크로이지만 작동합니다. 읽기 쉬운 버전에는 일부 논리가 다시 작성되었지만 재정의되지 않았습니다 ( o != '+'
대신에 o - '+'
), 그렇지 않으면 다른 하나의 들여 쓰기 (그리고 전처리 된) 버전입니다. 나는 계속 단순화하려고 노력하고있다 if(!o|o==41)return a;
부분에 부분 for()
루프이지만 결코 짧지 않습니다. 나는 아직도 그것이 할 수 있다고 믿지만 골프가 끝났다. 이 질문을 더 이상 작업하면 이름을 지정해서는 안되는 언어.
일반적인 lisp
(SBCL)
문자 수 : 251
(defun g(e)(if(numberp e)e(let((m (g (pop e)))(o(loop for x in e by #'cddr collect x))(n(loop for x in (cdr e)by #'cddr collect (g x))))(mapcar(lambda(x y)(setf m(apply x(list m y))))o n)m)))(defun w(e)(g(read-from-string(concatenate'string"("e")"))))
적절한 버전 (387 숯) :
(defun wrapper (exp) (golf-eval (read-from-string (concatenate 'string "(" exp ")"))))
(defun golf-eval (exp)
(if (numberp exp)
exp
(let ((mem (golf-eval (pop exp)))
(op-list (loop for x in exp by #'cddr collect x))
(num-list (loop for x in (cdr exp) by #'cddr collect (golf-eval x))))
(mapcar (lambda (x y) (setf mem (apply x (list mem y)))) op-list num-list)
mem)))
입력은 형식입니다 w()
, 하나의 문자열 인수를 취합니다. Nums/Operands 및 Operator가 패턴이 아닌 속임수를 사용하고 모든 피연산자를 재귀 적으로 평가하므로 매우 저렴하게 둥지를 틀고 있습니다. ;)
JavaScript (IE 호환되지 않음)
문자 수 : 268/260
완전히 난독 화 된 기능 :
function e(x){x=x.replace(/ /g,'')+')'
function P(n){return x[0]=='('?(x=x.substr(1),E()):(n=/^[-+]?[\d.]+/(x)[0],x=x.substr(n.length),+n)}function E(a,o,b){a=P()
for(;;){o=x[0]
x=x.substr(1)
if(o==')')return a
b=P()
a=o=='+'?a+b:o=='-'?a-b:o=='*'?a*b:a/b}}return E()}
또는 JavaScript 1.8 (Firefox 3+)에서 표현식 폐쇄를 사용하여 몇 문자를 저장할 수 있습니다.
e=function(x,P,E)(x=x.replace(/ /g,'')+')',P=function(n)(x[0]=='('?(x=x.substr(1),E()):(n=/^[-+]?[\d.]+/(x)[0],x=x.substr(n.length),+n)),E=function(a,o,b){a=P()
for(;;){o=x[0]
x=x.substr(1)
if(o==')')return a
b=P()
a=o=='+'?a+b:o=='-'?a-b:o=='*'?a*b:a/b}},E())
Clear/Semi-fpuscated 기능 :
function evaluate(x) {
x = x.replace(/ /g, "") + ")";
function primary() {
if (x[0] == '(') {
x = x.substr(1);
return expression();
}
var n = /^[-+]?\d*\.?\d*/.exec(x)[0];
x = x.substr(n.length);
return +n;
}
function expression() {
var a = primary();
for (;;) {
var operator = x[0];
x = x.substr(1);
if (operator == ')') {
return a;
}
var b = primary();
a = (operator == '+') ? a + b :
(operator == '-') ? a - b :
(operator == '*') ? a * b :
a / b;
}
}
return expression();
}
문자열에서 배열 스타일 첨자를 사용하기 때문에 어느 버전도 IE에서 작동하지 않습니다. 두 사건을 모두 교체하는 경우 x[0]
~와 함께 x.charAt(0)
, 첫 번째는 어디서나 작동해야합니다.
변수를 함수 매개 변수로 바꾸고 다른 IF 문을 조건부 연산자로 바꾸어 첫 번째 버전 이후로 문자가 더 많이 잘립니다.
c# 리그 사랑
문자 수 : 384
완전 양식 :
float E(string i){i=i.Replace(" ","");Regex b=new Regex(@"\((?>[^()]+|\((?<D>)|\)(?<-D>))*(?(D)(?!))\)");i=b.Replace(i,m=>Eval(m.Value.Substring(1,m.Length-2)).ToString());float r=0;foreach(Match m in Regex.Matches(i,@"(?<=^|\D)-?[\d.]+")){float f=float.Parse(m.Value);if(m.Index==0)r=f;else{char o=i[m.Index-1];if(o=='+')r+=f;if(o=='-')r-=f;if(o=='*')r*=f;if(o=='/')r/=f;}}return r;}
양육되지 않은 :
private static float Eval(string input)
{
input = input.Replace(" ", "");
Regex balancedMatcher = new Regex(@"\(
(?>
[^()]+
|
\( (?<Depth>)
|
\) (?<-Depth>)
)*
(?(Depth)(?!))
\)", RegexOptions.IgnorePatternWhitespace);
input = balancedMatcher.Replace(input, m => Eval(m.Value.Substring(1, m.Length - 2)).ToString());
float result = 0;
foreach (Match m in Regex.Matches(input, @"(?<=^|\D)-?[\d.]+"))
{
float floatVal = float.Parse(m.Value);
if (m.Index == 0)
{
result = floatVal;
}
else
{
char op = input[m.Index - 1];
if (op == '+') result += floatVal;
if (op == '-') result -= floatVal;
if (op == '*') result *= floatVal;
if (op == '/') result /= floatVal;
}
}
return result;
}
.NET의 Regex를 활용합니다 밸런싱 그룹 기능.
PHP
문자 수 : 284
난독 화 :
function f($m){return c($m[1]);}function g($n,$m){$o=$m[0];$m[0]=' ';return$o=='+'?$n+$m:($o=='-'?$n-$m:($o=='*'?$n*$m:$n/$m));}function c($s){while($s!=($t=preg_replace_callback('/\(([^()]*)\)/',f,$s)))$s=$t;preg_match_all('![-+/*].*?[\d.]+!',"+$s",$m);return array_reduce($m[0],g);}
읽기 가능 :
function callback1($m) {return c($m[1]);}
function callback2($n,$m) {
$o=$m[0];
$m[0]=' ';
return $o=='+' ? $n+$m : ($o=='-' ? $n-$m : ($o=='*' ? $n*$m : $n/$m));
}
function c($s){
while ($s != ($t = preg_replace_callback('/\(([^()]*)\)/','callback1',$s))) $s=$t;
preg_match_all('![-+/*].*?[\d.]+!', "+$s", $m);
return array_reduce($m[0], 'callback2');
}
$str = ' 2.45/8.5 * -9.27 + ( 5 * 0.0023 ) ';
var_dump(c($str));
# float(-2.66044117647)
유효한 입력 (음수 및 임의의 공백 포함)과 함께 작동해야합니다.
SQL (SQL Server 2008)
문자 수 : 4202
완전히 난독 화 된 기능 :
WITH Input(id,str)AS(SELECT 1,'1 + 3 / -8'UNION ALL SELECT 2,'2*3*4*5+99'UNION ALL SELECT 3,'4 * (9 - 4)/ (2 * 6 - 2)+ 8'UNION ALL SELECT 4,'1 + ((123 * 3 - 69)/ 100)'UNION ALL SELECT 5,'2.45/8.5*9.27+(5*0.0023)'),Separators(i,ch,str_src,priority)AS(SELECT 1,'-',1,1UNION ALL SELECT 2,'+',1,1UNION ALL SELECT 3,'*',1,1UNION ALL SELECT 4,'/',1,1UNION ALL SELECT 5,'(',0,0UNION ALL SELECT 6,')',0,0),SeparatorsStrSrc(str,i)AS(SELECT CAST('['AS varchar(max)),0UNION ALL SELECT str+ch,SSS.i+1FROM SeparatorsStrSrc SSS INNER JOIN Separators S ON SSS.i=S.i-1WHERE str_src<>0),SeparatorsStr(str)AS(SELECT str+']'FROM SeparatorsStrSrc WHERE i=(SELECT COUNT(*)FROM Separators WHERE str_src<>0)),ExprElementsSrc(id,i,tmp,ele,pre_ch,input_str)AS(SELECT id,1,CAST(LEFT(str,1)AS varchar(max)),CAST(''AS varchar(max)),CAST(' 'AS char(1)),SUBSTRING(str,2,LEN(str))FROM Input UNION ALL SELECT id,CASE ele WHEN''THEN i ELSE i+1 END,CAST(CASE WHEN LEFT(input_str,1)=' 'THEN''WHEN tmp='-'THEN CASE WHEN pre_ch LIKE(SELECT str FROM SeparatorsStr)THEN tmp+LEFT(input_str,1)ELSE LEFT(input_str,1)END WHEN LEFT(input_str,1)IN(SELECT ch FROM Separators)OR tmp IN(SELECT ch FROM Separators)THEN LEFT(input_str,1)ELSE tmp+LEFT(input_str,1)END AS varchar(max)),CAST(CASE WHEN LEFT(input_str,1)=' 'THEN tmp WHEN LEFT(input_str,1)='-'THEN CASE WHEN tmp IN(SELECT ch FROM Separators)THEN tmp ELSE''END WHEN LEFT(input_str,1)IN(SELECT ch FROM Separators)OR tmp IN(SELECT ch FROM Separators)THEN CASE WHEN tmp='-'AND pre_ch LIKE(SELECT str FROM SeparatorsStr)THEN''ELSE tmp END ELSE''END AS varchar(max)),CAST(LEFT(ele,1)AS char(1)),SUBSTRING(input_str,2,LEN(input_str))FROM ExprElementsSrc WHERE input_str<>''OR tmp<>''),ExprElements(id,i,ele)AS(SELECT id,i,ele FROM ExprElementsSrc WHERE ele<>''),Scanner(id,i,val)AS(SELECT id,i,CAST(ele AS varchar(max))FROM ExprElements WHERE ele<>''UNION ALL SELECT id,MAX(i)+1,NULL FROM ExprElements GROUP BY id),Operator(op,priority)AS(SELECT ch,priority FROM Separators WHERE priority<>0),Calc(id,c,i,pop_count,s0,s1,s2,stack,status)AS(SELECT Scanner.id,1,1,0,CAST(scanner.val AS varchar(max)),CAST(NULL AS varchar(max)),CAST(NULL AS varchar(max)),CAST(''AS varchar(max)),CAST('init'AS varchar(max))FROM Scanner WHERE Scanner.i=1UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,3,NULL,NULL,NULL,CASE Calc.s1 WHEN'+'THEN CAST(CAST(Calc.s2 AS real)+CAST(Calc.s0 AS real)AS varchar(max))WHEN'-'THEN CAST(CAST(Calc.s2 AS real)-CAST(Calc.s0 AS real)AS varchar(max))WHEN'*'THEN CAST(CAST(Calc.s2 AS real)*CAST(Calc.s0 AS real)AS varchar(max))WHEN'/'THEN CAST(CAST(Calc.s2 AS real)/CAST(Calc.s0 AS real)AS varchar(max))ELSE NULL END+' '+stack,CAST('calc '+Calc.s1 AS varchar(max))FROM Calc INNER JOIN Scanner NextVal ON Calc.id=NextVal.id AND Calc.i+1=NextVal.i WHERE Calc.pop_count=0AND ISNUMERIC(Calc.s2)=1AND Calc.s1 IN(SELECT op FROM Operator)AND ISNUMERIC(Calc.s0)=1AND(SELECT priority FROM Operator WHERE op=Calc.s1)>=COALESCE((SELECT priority FROM Operator WHERE op=NextVal.val),0)UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,3,NULL,NULL,NULL,s1+' '+stack,CAST('paren'AS varchar(max))FROM Calc WHERE pop_count=0AND s2='('AND ISNUMERIC(s1)=1AND s0=')'UNION ALL SELECT Calc.id,Calc.c+1,Calc.i,Calc.pop_count-1,s1,s2,CASE WHEN LEN(stack)>0THEN SUBSTRING(stack,1,CHARINDEX(' ',stack)-1)ELSE NULL END,CASE WHEN LEN(stack)>0THEN SUBSTRING(stack,CHARINDEX(' ',stack)+1,LEN(stack))ELSE''END,CAST('pop'AS varchar(max))FROM Calc WHERE Calc.pop_count>0UNION ALL SELECT Calc.id,Calc.c+1,Calc.i+1,Calc.pop_count,CAST(NextVal.val AS varchar(max)),s0,s1,coalesce(s2,'')+' '+stack,cast('read'as varchar(max))FROM Calc INNER JOIN Scanner NextVal ON Calc.id=NextVal.id AND Calc.i+1=NextVal.i WHERE NextVal.val IS NOT NULL AND Calc.pop_count=0AND((Calc.s0 IS NULL OR calc.s1 IS NULL OR calc.s2 IS NULL)OR NOT(ISNUMERIC(Calc.s2)=1AND Calc.s1 IN(SELECT op FROM Operator)AND ISNUMERIC(calc.s0)=1AND (SELECT priority FROM Operator WHERE op=Calc.s1)>=COALESCE((SELECT priority FROM Operator WHERE op=NextVal.val),0))AND NOT(s2='('AND ISNUMERIC(s1)=1AND s0=')')))SELECT Calc.id,Input.str,Calc.s0 AS result FROM Calc INNER JOIN Input ON Calc.id=Input.id WHERE Calc.c=(SELECT MAX(c)FROM Calc calc2 WHERE Calc.id=Calc2.id)ORDER BY id
Clear/Semi-fpuscated 기능 :
WITH
Input(id, str) AS (
SELECT 1, '1 + 3 / -8'
UNION ALL SELECT 2, '2*3*4*5+99'
UNION ALL SELECT 3, '4 * (9 - 4) / (2 * 6 - 2) + 8'
UNION ALL SELECT 4, '1 + ((123 * 3 - 69) / 100)'
UNION ALL SELECT 5, '2.45/8.5*9.27+(5*0.0023)'
)
, Separators(i, ch, str_src, priority) AS (
SELECT 1, '-', 1, 1
UNION ALL SELECT 2, '+', 1, 1
UNION ALL SELECT 3, '*', 1, 1
UNION ALL SELECT 4, '/', 1, 1
UNION ALL SELECT 5, '(', 0, 0
UNION ALL SELECT 6, ')', 0, 0
)
, SeparatorsStrSrc(str, i) AS (
SELECT CAST('[' AS varchar(max)), 0
UNION ALL
SELECT
str + ch
, SSS.i + 1
FROM
SeparatorsStrSrc SSS
INNER JOIN Separators S ON SSS.i = S.i - 1
WHERE
str_src <> 0
)
, SeparatorsStr(str) AS (
SELECT str + ']' FROM SeparatorsStrSrc
WHERE i = (SELECT COUNT(*) FROM Separators WHERE str_src <> 0)
)
, ExprElementsSrc(id, i, tmp, ele, pre_ch, input_str) AS (
SELECT
id
, 1
, CAST(LEFT(str, 1) AS varchar(max))
, CAST('' AS varchar(max))
, CAST(' ' AS char(1))
, SUBSTRING(str, 2, LEN(str))
FROM
Input
UNION ALL
SELECT
id
, CASE ele
WHEN '' THEN i
ELSE i + 1
END
, CAST(
CASE
WHEN LEFT(input_str, 1) = ' '
THEN ''
WHEN tmp = '-'
THEN CASE
WHEN pre_ch LIKE (SELECT str FROM SeparatorsStr)
THEN tmp + LEFT(input_str, 1)
ELSE LEFT(input_str, 1)
END
WHEN LEFT(input_str, 1) IN (SELECT ch FROM Separators)
OR
tmp IN (SELECT ch FROM Separators)
THEN LEFT(input_str, 1)
ELSE tmp + LEFT(input_str, 1)
END
AS varchar(max))
, CAST(
CASE
WHEN LEFT(input_str, 1) = ' '
THEN tmp
WHEN LEFT(input_str, 1) = '-'
THEN CASE
WHEN tmp IN (SELECT ch FROM Separators)
THEN tmp
ELSE ''
END
WHEN LEFT(input_str, 1) IN (SELECT ch FROM Separators)
OR
tmp IN (SELECT ch FROM Separators)
THEN CASE
WHEN tmp = '-' AND pre_ch LIKE (SELECT str FROM SeparatorsStr)
THEN ''
ELSE tmp
END
ELSE ''
END
AS varchar(max))
, CAST(LEFT(ele, 1) AS char(1))
, SUBSTRING(input_str, 2, LEN(input_str))
FROM
ExprElementsSrc
WHERE
input_str <> ''
OR
tmp <> ''
)
, ExprElements(id, i, ele) AS (
SELECT
id
, i
, ele
FROM
ExprElementsSrc
WHERE
ele <> ''
)
, Scanner(id, i, val) AS (
SELECT
id
, i
, CAST(ele AS varchar(max))
FROM
ExprElements
WHERE
ele <> ''
UNION ALL
SELECT
id
, MAX(i) + 1
, NULL
FROM
ExprElements
GROUP BY
id
)
, Operator(op, priority) AS (
SELECT
ch
, priority
FROM
Separators
WHERE
priority <> 0
)
, Calc(id, c, i, pop_count, s0, s1, s2, stack, status) AS (
SELECT
Scanner.id
, 1
, 1
, 0
, CAST(scanner.val AS varchar(max))
, CAST(NULL AS varchar(max))
, CAST(NULL AS varchar(max))
, CAST('' AS varchar(max))
, CAST('init' AS varchar(max))
FROM
Scanner
WHERE
Scanner.i = 1
UNION ALL
SELECT
Calc.id
, Calc.c + 1
, Calc.i
, 3
, NULL
, NULL
, NULL
, CASE Calc.s1
WHEN '+' THEN CAST(CAST(Calc.s2 AS real) + CAST(Calc.s0 AS real) AS varchar(max))
WHEN '-' THEN CAST(CAST(Calc.s2 AS real) - CAST(Calc.s0 AS real) AS varchar(max))
WHEN '*' THEN CAST(CAST(Calc.s2 AS real) * CAST(Calc.s0 AS real) AS varchar(max))
WHEN '/' THEN CAST(CAST(Calc.s2 AS real) / CAST(Calc.s0 AS real) AS varchar(max))
ELSE NULL
END
+ ' '
+ stack
, CAST('calc ' + Calc.s1 AS varchar(max))
FROM
Calc
INNER JOIN Scanner NextVal ON Calc.id = NextVal.id
AND Calc.i + 1 = NextVal.i
WHERE
Calc.pop_count = 0
AND ISNUMERIC(Calc.s2) = 1
AND Calc.s1 IN (SELECT op FROM Operator)
AND ISNUMERIC(Calc.s0) = 1
AND (SELECT priority FROM Operator WHERE op = Calc.s1)
>= COALESCE((SELECT priority FROM Operator WHERE op = NextVal.val), 0)
UNION ALL
SELECT
Calc.id
, Calc.c + 1
, Calc.i
, 3
, NULL
, NULL
, NULL
, s1 + ' ' + stack
, CAST('paren' AS varchar(max))
FROM
Calc
WHERE
pop_count = 0
AND s2 = '('
AND ISNUMERIC(s1) = 1
AND s0 = ')'
UNION ALL
SELECT
Calc.id
, Calc.c + 1
, Calc.i
, Calc.pop_count - 1
, s1
, s2
, CASE
WHEN LEN(stack) > 0
THEN SUBSTRING(stack, 1, CHARINDEX(' ', stack) - 1)
ELSE NULL
END
, CASE
WHEN LEN(stack) > 0
THEN SUBSTRING(stack, CHARINDEX(' ', stack) + 1, LEN(stack))
ELSE ''
END
, CAST('pop' AS varchar(max))
FROM
Calc
WHERE
Calc.pop_count > 0
UNION ALL
SELECT
Calc.id
, Calc.c + 1
, Calc.i + 1
, Calc.pop_count
, CAST(NextVal.val AS varchar(max))
, s0
, s1
, coalesce(s2, '') + ' ' + stack
, cast('read' as varchar(max))
FROM
Calc
INNER JOIN Scanner NextVal ON Calc.id = NextVal.id
AND Calc.i + 1 = NextVal.i
WHERE
NextVal.val IS NOT NULL
AND Calc.pop_count = 0
AND (
(Calc.s0 IS NULL or calc.s1 is null or calc.s2 is null)
OR
NOT(
ISNUMERIC(Calc.s2) = 1
AND Calc.s1 IN (SELECT op FROM Operator)
AND ISNUMERIC(calc.s0) = 1
AND (SELECT priority FROM Operator WHERE op = Calc.s1)
>= COALESCE((SELECT priority FROM Operator WHERE op = NextVal.val), 0)
)
AND NOT(s2 = '(' AND ISNUMERIC(s1) = 1 AND s0 = ')')
)
)
SELECT
Calc.id
, Input.str
, Calc.s0 AS result
FROM
Calc
INNER JOIN Input ON Calc.id = Input.id
WHERE
Calc.c = (SELECT MAX(c) FROM Calc calc2
WHERE Calc.id = Calc2.id)
ORDER BY
id
가장 짧지 않습니다. 그러나 나는 그것이 SQL에 매우 유연하다고 생각합니다. 새로운 운영자를 추가하기가 쉽습니다. 운영자의 우선 순위를 쉽게 변경하는 것은 쉽습니다.
에프#
문자 수 : 327
OP는 F# 버전을 찾고있었습니다. 내가 학대하고 있기 때문에 훨씬 더 잘 할 수 있습니다. 심판 여기에서 캐릭터를 저장합니다. 그것은 대부분의 것들을 처리합니다 -(1.0), 3 - -3 그리고 심지어 0 - .5 등.
let g s=
let c=ref[for x in System.Text.RegularExpressions.Regex.Matches(s,"[0-9.]+|[^\s]")->x.Value]
let rec e v=if (!c).IsEmpty then v else
let h=(!c).Head
c:=(!c).Tail
match h with|"("->e(e 0.0)|")"->v|"+"->e(v+(e 0.0))|"-"->e(v-(e 0.0))|"/"->e(v/(e 0.0))|"*"->e(v*(e 0.0))|x->float x
e(e 0.0)
제이
문자 수 : 208
후에 제프 모저나는이 언어에 대해 완전히 잊어 버렸다는 것을 깨달았다. 나는 전문가가 아니지만 첫 번째 시도는 다소 잘 진행되었다.
e=:>@{:@f@;:
f=:''&(4 :0)
'y x'=.x g y
while.($y)*-.')'={.>{.y do.'y x'=.(x,>(-.'/'={.>{.y){('%';y))g}.y end.y;x
)
g=:4 :0
z=.>{.y
if.z='('do.'y z'=.f}.y else.if.z='-'do.z=.'_',>{.}.y end.end.(}.y);":".x,z
)
매핑 해야하는 것은 조금 성가신 일입니다 x/y
그리고 -z
J 's로 x%y
그리고 _z
. 그 없이는이 코드의 50%가 사라질 수 있습니다.
파이썬 (아무것도 가져 오지 않고)
문자 수 : 222
나는 Dave의 대답에서 많은 트릭을 훔 쳤지 만 더 많은 캐릭터를 면도했습니다.
def e(s,l=0,n=0,f='+'):
if s:l=[c for c in s+')'if' '!=c]
while f!=')':
p=l.pop;m=p(0)
if m=='(':m=e(0,l)
while l[0]not in'+-*/)':m+=p(0)
m=float(m);n={'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[f];f=p(0)
return n
주석은 버전 :
def evaluate(stringexpr, listexpr=0, n=0, f_operation='+'):
# start out as taking 0 + the expression... (or could use 1 * ;)
# We'll prefer to keep the expression as a list of characters,
# so we can use .pop(0) to eat up the expression as we go.
if stringexpr:
listexpr = [c for c in stringexpr+')' if c!=' ']
# use ')' as sentinel to return the answer
while f_operation != ')':
m_next = listexpr.pop(0)
if m_next == '(':
# lists are passed by reference, so this call will eat the (parexp)
m_next = evaluate(None, listexpr)
else:
# rebuild any upcoming numeric chars into a string
while listexpr[0] not in '+-*/)':
m_next += listexpr.pop(0)
# Update n as the current answer. But never divide by 0.
m = float(m_next)
n = {'+':n+m, '-':n-m, '*':n*m, '/':n/(m or 1)}[f_operation]
# prepare the next operation (known to be one of '+-*/)')
f_operation = listexpr.pop(0)
return n
씨#
문자 수 : 403
그래서 여기 내 해결책이 있습니다 ... 나는 여전히 누군가가 그것을 이길 수있는 C#에 하나를 게시하기를 기다리고 있습니다. (Marc Gravell은 가까웠지만 좀 더 땜질을 한 후에 나보다 더 잘할 수 있습니다.)
완전히 난독 화 된 기능 :
float e(string x){float v=0;if(float.TryParse(x,out v))return v;x+=';';int t=0;
char o,s='?',p='+';float n=0;int l=0;for(int i=0;i<x.Length;i++){o=s;if(
x[i]!=' '){s=x[i];if(char.IsDigit(x[i])|s=='.'|(s=='-'&o!='1'))s='1';if(s==')')
l--;if(s!=o&l==0){if(o=='1'|o==')'){n=e(x.Substring(t,i-t));if(p=='+')v+=n;
if(p=='-')v-=n;if(p=='*')v*=n;if(p=='/')v/=n;p=x[i];}t=i;if(s=='(')t++;}
if(s=='(')l++;}}return v;}
반포 스테이션 기능 :
public static float Eval(string expr)
{
float val = 0;
if (float.TryParse(expr, out val))
return val;
expr += ';';
int tokenStart = 0;
char oldState, state = '?', op = '+';
float num = 0;
int level = 0;
for (int i = 0; i < expr.Length; i++)
{
oldState = state;
if (expr[i] != ' ')
{
state = expr[i];
if (char.IsDigit(expr[i]) || state == '.' ||
(state == '-' && oldState != '1'))
state = '1';
if (state == ')')
level--;
if (state != oldState && level == 0)
{
if (oldState == '1' || oldState == ')')
{
num = Eval(expr.Substring(tokenStart, i - tokenStart));
if (op == '+') val += num;
if (op == '-') val -= num;
if (op == '*') val *= num;
if (op == '/') val /= num;
op = expr[i];
}
tokenStart = i;
if (state == '(')
tokenStart++;
}
if (state == '(')
level++;
}
}
return val;
}
여기서 너무 영리한 것은 없습니다. 그러나이 함수는 재진입 (즉, 스레드-안전)의 이점이 있습니다.
또한 C# (유효한 1.0, 2.0 및 3.0)로 작성된 경우 숯의 수에 대해 합리적으로 만족합니다.
여기에 또 하나가 온다 :
쉘 스크립트 (sed+awk 사용)
문자 수 : 295
난독 화 :
e(){ a="$1";while echo "$a"|grep -q \(;do eval "`echo "$a"|sed 's/\(.*\)(\([^()]*\))\(.*\)/a="\1\`e \"\2\"\`\3"/'`";done; echo "$a"|sed 's/\([-+*/]\) *\(-\?\) */ \1 \2/g'|awk '{t=$1;for(i=2;i<NF;i+=2){j=$(i+1);if($i=="+") t+=j; else if($i=="-") t-=j; else if($i=="*") t*=j; else t/=j}print t}';}
읽을 수 있습니다
e () {
a="$1"
# Recursively process bracket-expressions
while echo "$a"|grep -q \(; do
eval "`echo "$a"|
sed 's/\(.*\)(\([^()]*\))\(.*\)/a="\1\`e \"\2\"\`\3"/'`"
done
# Compute expression without brackets
echo "$a"|
sed 's/\([-+*/]\) *\(-\?\) */ \1 \2/g'|
awk '{
t=$1;
for(i=2;i<NF;i+=2){
j=$(i+1);
if($i=="+") t+=j;
else if($i=="-") t-=j;
else if($i=="*") t*=j;
else t/=j
}
print t
}'
}
테스트:
str=' 2.45 / 8.5 * 9.27 + ( 5 * 0.0023 ) '
echo "$str"|bc -l
e "$str"
결과:
2.68344117647058823526
2.68344
MATLAB (V7.8.0)
문자 수 : 239
난독 화 기능 :
function [v,s]=m(s),r=1;while s,s=regexp(s,'( ?)(?(1)-?)[\.\d]+|\S','match');c=s{end};s=[s{1:end-1}];if any(c>47),v=str2num(c);elseif c>41,[l,s]=m(s);v=[l/v l*v l+v l-v];v=v(c=='/*+-');if r,break;end;r=1;elseif c<41,break;end;r=r&c~=41;end
Clear (ER) 기능 :
function [value,str] = math(str)
returnNow = 1;
while str,
str = regexp(str,'( ?)(?(1)-?)[\.\d]+|\S','match');
current = str{end};
str = [str{1:end-1}];
if any(current > 47),
value = str2num(current);
elseif current > 41,
[leftValue,str] = math(str);
value = [leftValue/value leftValue*value ...
leftValue+value leftValue-value];
value = value(current == '/*+-');
if returnNow,
break;
end;
returnNow = 1;
elseif current < 41,
break;
end;
returnNow = returnNow & (c ~= 41);
end
테스트:
>> [math('1 + 3 / -8'); ...
math('2*3*4*5+99'); ...
math('4 * (9 - 4) / (2 * 6 - 2) + 8'); ...
math('1 + ((123 * 3 - 69) / 100)'); ...
math('2.45/8.5*9.27+(5*0.0023)')]
ans =
-0.5000
219.0000
10.0000
4.0000
2.6834
시놉시스 : 정규 표현 및 재귀의 혼합. 속임수와 평가를 사용하지 않고 지금까지 할 수 있었던 최선입니다.
루비
문자 수 : 170
난독 화 :
def s(x)
while x.sub!(/\(([^\(\)]*?)\)/){s($1)}
x.gsub!('--','')
end
while x.sub!(/(-?[\d.]+)[ ]*([+\-*\/])[ ]*(-?[\d.]+)/){$1.to_f.send($2,$3.to_f)}
end
x.strip.to_f
end
읽기 가능 :
def s(x)
while x.sub!(/\(([^\(\)]*?)\)/){s($1)}
x.gsub!('--','')
end
while x.sub!(/(-?[\d.]+)[ ]*([+\-*\/])[ ]*(-?[\d.]+)/){$1.to_f.send($2,$3.to_f)}
end
x.strip.to_f
end
[
['1 + 3 / -8', -0.5],
['2*3*4*5+99', 219],
['4 * (9 - 4) / (2 * 6 - 2) + 8', 10],
['1 + ((123 * 3 - 69) / 100)', 4],
['2.45/8.5*9.27+(5*0.0023)',2.68344117647059],
['(3+7) - (5+2)', 3]
].each do |pair|
a,b = s(String.new(pair[0])),pair[1]
print pair[0].ljust(25), ' = ', b, ' (', a==b, ')'
puts
end
이것에 대한 진정한 난독 화는 없으며, 나는 그것이 나의 첫 번째와 크게 다르기 때문에 Fresh를 게시하기로 결정했습니다. 처음부터 이것을 보았을 것입니다. 이 과정은 매우 간단한 제거 프로세스입니다. 더 이상 발견되지 않을 때까지 가장 높은 괄호 (가장 중첩 된)를 숫자로 찾아서 해결 한 다음 모든 기존 숫자와 작업을 결과로 해결합니다. 그리고 괄호를 해결하는 동안 나는 그것을 모든 더블 로시 (float.to_f는 그들과 무엇을 해야할지 모른다).
따라서 양수 및 음수 (+3, 3, & -3)를 지원하고 처리 순서만으로 괄호 안에서 하위 표현을 부정했습니다. 짧은 구현은 Perl (w/o eval)입니다.
편집하다: 나는 여전히 Perl을 쫓고 있지만 이것은 지금 두 번째로 작은 대답입니다. 나는 두 번째 동정인을 변경하고 줄의 처리를 파괴적으로 변경함으로써 그것을 축소했다 (오래된 문자열을 대체). 이것은 문자열을 복제 할 필요가 없어졌습니다. 이것은 문자열에 대한 새로운 포인터라는 것을 알았습니다. 그리고 기능을 바꾸는 것 에스 ~에서 해결하다 몇 가지 캐릭터를 저장했습니다.
정규 표현식이있는 파이썬
문자 수 : 283
완전히 난독 화 된 기능 :
import re
from operator import*
def c(e):
O=dict(zip("+-/*()",(add,sub,truediv,mul)))
a=[add,0];s=a
for v,o in re.findall("(-?[.\d]+)|([+-/*()])",e):
if v:s=[float(v)]+s
elif o=="(":s=a+s
elif o!=")":s=[O[o]]+s
if v or o==")":s[:3]=[s[1](s[2],s[0])]
return s[0]
난독 화되지 않음 :
import re
from operator import *
def compute(s):
operators = dict(zip("+-/*()", (add, sub, truediv, mul)))
stack = [add, 0]
for val, op in re.findall("(-?[.\d]+)|([+-/*()])", s):
if val:
stack = [float(val)] + stack
elif op == "(":
stack = [add, 0] + stack
elif op != ")":
stack = [operators[op]] + stack
if val or op == ")":
stack[:3] = [stack[1](stack[2], stack[0])]
return stack[0]
정규 표현식을 사용하여 택시가 다른 파이썬 솔루션을 이겼는지보고 싶었습니다.
할 수 없었습니다.
내가 사용하는 정규 표현식은 각 쌍의 항목 하나만 유효한 쌍 목록 (Val, OP)을 만듭니다. 코드의 나머지 부분은 Python List 할당 구문을 사용하여 계산의 결과로 스택에서 상위 3 개 셀을 교체하는 깔끔한 트릭을 갖춘 다소 표준 스택 기반 파서입니다. 이 작업을 음수로 만들려면 두 개의 추가 문자 만 필요했습니다 (-?).
파이썬
문자 수 : 382
정규식 교체를 많이 사용하는 또 다른 파이썬 솔루션. 루프를 통과하는 각각의 실행 가장 간단한 표현식이 계산되고 결과는 문자열로 다시 들어갑니다.
정규 표현이 난독 화 될 것으로 간주하지 않는 한, 이것은 방출되지 않은 코드입니다.
import re
from operator import *
operators = dict(zip("+-/*", (add, sub, truediv, mul)))
def compute(s):
def repl(m):
v1, op, v2 = m.groups()
return str(operators[op](float(v1), float(v2)))
while not re.match("^\d+\.\d+$", s):
s = re.sub("([.\d]+)\s*([+-/*])\s*([.\d]+)", repl, s)
s = re.sub("\(([.\d]+)\)", r"\1", s)
return s
내가 들어가는 것처럼이 아이디어가 있었고, 내가 그것을 적어 놓고 그것을 작동시킬 때까지 그것을 놓아 줄 수 없었습니다.
씨#
문자 수 : 396 (업데이트)
(그러나 "/ -8"으로 추가 한 테스트에 실패하고 고치는 경향이 없습니다 ...
static float Eval(string s){int i,j;s=s.Trim();while((i=s.IndexOf(')'))>=0){j=s.LastIndexOf('(',i,i);s=s.Substring(0,j++)+Eval(s.Substring(j,i-j))+s.Substring(i+1);}if((i=s.LastIndexOfAny("+-*/".ToCharArray()))<0) return float.Parse(s);var r=float.Parse(s.Substring(i+1));var l=i>0?Eval(s.Substring(0,i)):(float?)null;return s[i]=='+'?(l??0)+r:(s[i]=='-'?(l??0)-r:(s[i]=='/'?(l??1)/r:(l??1)*r));}
에서:
static float Eval(string s)
{
int i, j;
s = s.Trim();
while ((i = s.IndexOf(')')) >= 0)
{
j = s.LastIndexOf('(', i, i);
s = s.Substring(0, j++) + Eval(s.Substring(j, i - j)) + s.Substring(i + 1);
}
if ((i = s.LastIndexOfAny("+-*/".ToCharArray())) < 0) return float.Parse(s);
var r = float.Parse(s.Substring(i + 1));
var l = i > 0 ? Eval(s.Substring(0, i)) : (float?)null;
return s[i] == '+'
? (l ?? 0) + r
: (s[i] == '-'
? (l ?? 0) - r
: (s[i] == '/'
? (l ?? 1) / r
: (l ?? 1) * r));
}
파이썬
문자 수 : 235
완전히 난독 화 된 기능 :
def g(a):
i=len(a)
while i:
try:m=g(a[i+1:]);n=g(a[:i]);a=str({'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[a[i]])
except:i-=1;j=a.rfind('(')+1
if j:k=a.find(')',j);a=a[:j-1]+str(g(a[j:k]))+a[k+1:]
return float(a.replace('--',''))
반포 스테이션 :
def g(a):
i=len(a);
# do the math
while i:
try:
# recursively evaluate left and right
m=g(a[i+1:])
n=g(a[:i])
# try to do the math assuming that a[i] is an operator
a=str({'+':n+m,'-':n-m,'*':n*m,'/':n/(m or 1)}[a[i]])
except:
# failure -> next try
i-=1
j=a.rfind('(')+1
# replace brackets in parallel (this part is executed first)
if j:
k=a.find(')',j)
a=a[:j-1]+str(g(a[j:k]))+a[k+1:]
return float(a.replace('--',''))
FWIW, N+1 번째 파이썬 솔루션. 시도 외식의 끔찍한 남용에서 나는 시행 착오 접근법을 사용합니다. 같은 것들을 포함한 모든 사례를 올바르게 처리해야합니다 -(8)
, --8
그리고 g('-(1 - 3)')
. 재입국입니다. 지원없이 --
많은 구현이 지원하지 않는 사례는 217 숯입니다 (이전 개정판 참조).
일요일에 흥미로운 시간과 월요일에 30 분 더 감사합니다. 감사합니다 크루 보 그의 멋진 덕트를 위해.
루비
문자 수 : 217 179
이것은 지금까지 가장 짧은 루비 솔루션입니다 (REGEXP를 기반으로 한 중 하나는 String이 괄호 그룹이 거의 포함되어있을 때 잘못된 답변을 얻습니다). - 더 이상 사실이 아닙니다. Regex 및 대체에 기반한 솔루션은 짧습니다. 이것은 축적기 스택을 기반으로하며 왼쪽에서 오른쪽으로 전체 표현식을 구문 분석합니다. 재입국이며 입력 문자열을 수정하지 않습니다. 사용하지 않는 규칙을 위반 한 혐의로 기소 될 수 있습니다. eval
, 전화대로 Float
수학적 mnemonics (+,-,/,*)와 동일한 이름을 가진 방법.
난독 화 코드 (오래된 버전, 아래 조정):
def f(p);a,o=[0],['+']
p.sub(/-/,'+-').scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each{|n|
q,w=n;case w;when'(';a<<0;o<<'+';when')';q=a.pop;else;o<<w
end if q.nil?;a[-1]=a[-1].method(o.pop).call(q.to_f) if !q.nil?};a[0];end
더 난독 화 된 코드 :
def f(p);a,o=[0],[:+]
p.scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each{|n|q,w=n;case w
when'(';a<<0;o<<:+;when')';q=a.pop;else;o<<w;end if !q
a<<a.pop.send(o.pop,q.to_f)if q};a[0];end
클린 코드 :
def f(p)
accumulators, operands = [0], ['+']
p.gsub(/-/,'+-').scan(/(?:(-?\d+(?:\.\d+)?)|(.))\s*/).each do |n|
number, operand = n
case operand
when '('
accumulators << 0
operands << '+'
when ')'
number = accumulators.pop
operands.pop
else
operands[-1] = operand
end if number.nil?
accumulators[-1] = accumulators.last.method(operands[-1]).call(number.to_f) unless number.nil?
end
accumulators.first
end
루비 1.8.7
문자 수 : 620
내 구현에 대해 쉽게 시도해보십시오. 제 인생에서 표현 파서를 쓴 것은 이번이 처음입니다! 나는 그것이 최고가 아니라고 보장합니다.
난독 화 :
def solve_expression(e)
t,r,s,c,n=e.chars.to_a,[],'','',''
while(c=t.shift)
n=t[0]
if (s+c).match(/^(-?)[.\d]+$/) || (!n.nil? && n.match(/\d/) && c=='-')
s+=c
elsif (c=='-' && n=='(') || c=='('
m,o,x=c=='-',1,''
while(c=t.shift)
o+=1 if c=='('
o-=1 if c==')'
x+=c unless c==')' && o==0
break if o==0
end
r.push(m ? -solve_expression(x) : solve_expression(x))
s=''
elsif c.match(/[+\-\/*]/)
r.push(c) and s=''
else
r.push(s) if !s.empty?
s=''
end
end
r.push(s) unless s.empty?
i=1
a=r[0].to_f
while i<r.count
b,c=r[i..i+1]
c=c.to_f
case b
when '+': a=a+c
when '-': a=a-c
when '*': a=a*c
when '/': a=a/c
end
i+=2
end
a
end
읽기 가능 :
def solve_expression(expr)
chars = expr.chars.to_a # characters of the expression
parts = [] # resulting parts
s,c,n = '','','' # current string, character, next character
while(c = chars.shift)
n = chars[0]
if (s + c).match(/^(-?)[.\d]+$/) || (!n.nil? && n.match(/\d/) && c == '-') # only concatenate when it is part of a valid number
s += c
elsif (c == '-' && n == '(') || c == '(' # begin a sub-expression
negate = c == '-'
open = 1
subExpr = ''
while(c = chars.shift)
open += 1 if c == '('
open -= 1 if c == ')'
# if the number of open parenthesis equals 0, we've run to the end of the
# expression. Make a new expression with the new string, and add it to the
# stack.
subExpr += c unless c == ')' && open == 0
break if open == 0
end
parts.push(negate ? -solve_expression(subExpr) : solve_expression(subExpr))
s = ''
elsif c.match(/[+\-\/*]/)
parts.push(c) and s = ''
else
parts.push(s) if !s.empty?
s = ''
end
end
parts.push(s) unless s.empty? # expression exits 1 character too soon.
# now for some solutions!
i = 1
a = parts[0].to_f # left-most value is will become the result
while i < parts.count
b,c = parts[i..i+1]
c = c.to_f
case b
when '+': a = a + c
when '-': a = a - c
when '*': a = a * c
when '/': a = a / c
end
i += 2
end
a
end
루비 1.9
(Regex 때문에)
문자 수 : 296
def d(s)
while m = s.match(/((?<pg>\((?:\\[()]|[^()]|\g<pg>)*\)))/)
s.sub!(m[:pg], d(m[:pg][1,m[:pg].size-2]))
end
while m = s.match(/(-?\d+(\.\d+)?)\s*([*+\-\/])\s*(-?\d+(\.\d+)?)/)
r=m[1].to_f.send(m[3],m[4].to_f) if %w{+ - * /}.include?m[3]
s.sub!(m[0], r.to_s)
end
s
end
편집 : Martin의 최적화가 포함됩니다.
snobol4
문자 수 : 232
a = pos(0) | '('
n = span('0123456789.')
j = '!+;!-;!*;!/; output = e'
d j '!' len(1) . y = " e a . q n . l '" y "' n . r = q (l " y " r) :s(p)" :s(d)
k = code(j)
e = input
s e ' ' = :s(s)
p e ('(' n . i ')') = i :s(p)f<k>
end
이것은 반 자치입니다. 사용합니다 code()
(Eval의 변형) 자체를 제거하지만 입력 표현식을 평가하지는 않습니다.
없는 버전이없는 버전 code
:
prefix = pos(0) | '('
num = span('0123456789.')
expr = input
spaces expr ' ' = '' :s(spaces)
paren expr ('(' num . x ')') = x :s(paren)
add expr (prefix . pfx) (num . l) '+' (num . r) = pfx (l + r) :s(paren)
sub expr (prefix . pfx) (num . l) '-' (num . r) = pfx (l - r) :s(paren)
mul expr (prefix . pfx) (num . l) '*' (num . r) = pfx (l * r) :s(paren)
div expr (prefix . pfx) (num . l) '/' (num . r) = pfx (l / r) :s(paren)
output = expr
end
전략:
- 먼저 모든 공간을 제거합니다 (
spaces
) - 가능할 때마다 숫자를 둘러싼 괄호를 제거합니다 (
paren
) - 그렇지 않으면, 두 개의 숫자와 관련된 간단한 표현을 찾으십시오.
'('
또는 문자열의 시작시 - 위의 규칙 중 어느 것도 적용되지 않으면 표현식이 완전히 평가됩니다. 이제 입력이 잘 형성되면 숫자가 남아 있어야합니다.
예시:
1 + (2 * 3) + 4
1+(2*3)+4
[spaces
]1+(6)+4
[mul
]1+6+4
[paren
]7+4
[add
]11
[add
]
씨#
문자 수 : 355
나는 가져 갔다 놀 도린의 대답 그리고 그것을 수정 했으므로 Noldorin에게 이것에 대한 99%를 제공하십시오. 알고리즘으로 사용할 수있는 최선은 408 자입니다. 보다 놀 도린의 대답 명확한 코드 버전의 경우.
변경 :
숫자와 비교하기 위해 Char 비교를 변경하십시오.
일부 기본 선언을 제거하고 동일한 유형의 선언을 결합했습니다.
일부 IF 판결 중 일부를 재 작업했습니다.
float q(string x){float v,n;if(!float.TryParse(x,out v)){x+=';';int t=0,l=0,i=0;char o,s='?',p='+';for(;i<x.Length;i++){o=s;if(x[i]!=32){s=x[i];if(char.IsDigit(x[i])|s==46|(s==45&o!=49))s='1';if(s==41)l--;if(s!=o&l==0){if(o==49|o==41){n=q(x.Substring(t,i-t));v=p==43?v+n:p==45?v-n:p==42?v*n:p==47?v/n:v;p=x[i];}t=i;if(s==40)t++;}if(s==40)l++;}}}return v;}
편집 : 리턴 스테이션 중 하나를 제거하여 361에서 355로 더 낮추었습니다.