무엇이 올바른 방법은 사용자 지정.NET 예외 serializable?
-
01-07-2019 - |
문제
더 구체적으로 할 때,예외가 포함되어 사용자 객체지 않을 수도 있습니다 또는 자체가 직렬화.
이 예제:
public class MyException : Exception
{
private readonly string resourceName;
private readonly IList<string> validationErrors;
public MyException(string resourceName, IList<string> validationErrors)
{
this.resourceName = resourceName;
this.validationErrors = validationErrors;
}
public string ResourceName
{
get { return this.resourceName; }
}
public IList<string> ValidationErrors
{
get { return this.validationErrors; }
}
}
이 예외는 직렬화 de-직렬화,두 개의 사용자 정의 속성(ResourceName
고 ValidationErrors
이)보존되지 않습니다.속성을 반환됩니다 null
.
이 일반적인 코드는 패턴을 구현하기 위한 직렬화를 위한 주문 예외?
해결책
기본 구현하지 않고,사용자 정의 속성
SerializableExceptionWithoutCustomproperties.cs:
namespace SerializableExceptions
{
using System;
using System.Runtime.Serialization;
[Serializable]
// Important: This attribute is NOT inherited from Exception, and MUST be specified
// otherwise serialization will fail with a SerializationException stating that
// "Type X in Assembly Y is not marked as serializable."
public class SerializableExceptionWithoutCustomProperties : Exception
{
public SerializableExceptionWithoutCustomProperties()
{
}
public SerializableExceptionWithoutCustomProperties(string message)
: base(message)
{
}
public SerializableExceptionWithoutCustomProperties(string message, Exception innerException)
: base(message, innerException)
{
}
// Without this constructor, deserialization will fail
protected SerializableExceptionWithoutCustomProperties(SerializationInfo info, StreamingContext context)
: base(info, context)
{
}
}
}
전체 구현으로,사용자 정의 속성
완벽한 구현을 사용자 정의 직렬화 제외(MySerializableException
고),파생 sealed
exception(MyDerivedSerializableException
).
주요 포인트이 구현은 여기에 요약되어 있습니다:
- 당신 장식한 각 파생 클래스
[Serializable]
특성 — 이 특성은 상속되지 않는 기본 클래스에서,그리고 지정되지 않은 경우,직렬화를 실패로SerializationException
알 "유형 X 에 어셈블리 Y 로 표시되어 있지 않은 직렬화." - 당신 을 구현해야 합니다 사용자 지정 직렬화.이
[Serializable]
특성 혼자가 충분하지 않습니다—Exception
를 구현하는ISerializable
을 의미하는 파생된 클래스도 구현해야 합니다 사용자 지정 serialization.이 두 가지 단계가 포함됩니다:- 제공하는 직렬화를 생성자.이 생성자를야
private
는 경우에 당신의 클래스sealed
, 그렇지 않으면야protected
액세스할 수 있도록 파생됩니다. - Override GetObjectData() 고 있는지 확인 당신이 전화를 통해
base.GetObjectData(info, context)
끝에 있도록 하기 위해 기본 클래스에 저장이 그것의 자신의 상태가 됩니다.
- 제공하는 직렬화를 생성자.이 생성자를야
SerializableExceptionWithCustomProperties.cs:
namespace SerializableExceptions
{
using System;
using System.Collections.Generic;
using System.Runtime.Serialization;
using System.Security.Permissions;
[Serializable]
// Important: This attribute is NOT inherited from Exception, and MUST be specified
// otherwise serialization will fail with a SerializationException stating that
// "Type X in Assembly Y is not marked as serializable."
public class SerializableExceptionWithCustomProperties : Exception
{
private readonly string resourceName;
private readonly IList<string> validationErrors;
public SerializableExceptionWithCustomProperties()
{
}
public SerializableExceptionWithCustomProperties(string message)
: base(message)
{
}
public SerializableExceptionWithCustomProperties(string message, Exception innerException)
: base(message, innerException)
{
}
public SerializableExceptionWithCustomProperties(string message, string resourceName, IList<string> validationErrors)
: base(message)
{
this.resourceName = resourceName;
this.validationErrors = validationErrors;
}
public SerializableExceptionWithCustomProperties(string message, string resourceName, IList<string> validationErrors, Exception innerException)
: base(message, innerException)
{
this.resourceName = resourceName;
this.validationErrors = validationErrors;
}
[SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
// Constructor should be protected for unsealed classes, private for sealed classes.
// (The Serializer invokes this constructor through reflection, so it can be private)
protected SerializableExceptionWithCustomProperties(SerializationInfo info, StreamingContext context)
: base(info, context)
{
this.resourceName = info.GetString("ResourceName");
this.validationErrors = (IList<string>)info.GetValue("ValidationErrors", typeof(IList<string>));
}
public string ResourceName
{
get { return this.resourceName; }
}
public IList<string> ValidationErrors
{
get { return this.validationErrors; }
}
[SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
public override void GetObjectData(SerializationInfo info, StreamingContext context)
{
if (info == null)
{
throw new ArgumentNullException("info");
}
info.AddValue("ResourceName", this.ResourceName);
// Note: if "List<T>" isn't serializable you may need to work out another
// method of adding your list, this is just for show...
info.AddValue("ValidationErrors", this.ValidationErrors, typeof(IList<string>));
// MUST call through to the base class to let it save its own state
base.GetObjectData(info, context);
}
}
}
DerivedSerializableExceptionWithadditionalcustomproperties.cs:
namespace SerializableExceptions
{
using System;
using System.Collections.Generic;
using System.Runtime.Serialization;
using System.Security.Permissions;
[Serializable]
public sealed class DerivedSerializableExceptionWithAdditionalCustomProperty : SerializableExceptionWithCustomProperties
{
private readonly string username;
public DerivedSerializableExceptionWithAdditionalCustomProperty()
{
}
public DerivedSerializableExceptionWithAdditionalCustomProperty(string message)
: base(message)
{
}
public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, Exception innerException)
: base(message, innerException)
{
}
public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, string username, string resourceName, IList<string> validationErrors)
: base(message, resourceName, validationErrors)
{
this.username = username;
}
public DerivedSerializableExceptionWithAdditionalCustomProperty(string message, string username, string resourceName, IList<string> validationErrors, Exception innerException)
: base(message, resourceName, validationErrors, innerException)
{
this.username = username;
}
[SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter = true)]
// Serialization constructor is private, as this class is sealed
private DerivedSerializableExceptionWithAdditionalCustomProperty(SerializationInfo info, StreamingContext context)
: base(info, context)
{
this.username = info.GetString("Username");
}
public string Username
{
get { return this.username; }
}
public override void GetObjectData(SerializationInfo info, StreamingContext context)
{
if (info == null)
{
throw new ArgumentNullException("info");
}
info.AddValue("Username", this.username);
base.GetObjectData(info, context);
}
}
}
단위 테스트
MSTest 에 대한 단위 테스트는 세 가지 예외가 정의된 형식이다.
UnitTests.cs:
namespace SerializableExceptions
{
using System;
using System.Collections.Generic;
using System.IO;
using System.Runtime.Serialization.Formatters.Binary;
using Microsoft.VisualStudio.TestTools.UnitTesting;
[TestClass]
public class UnitTests
{
private const string Message = "The widget has unavoidably blooped out.";
private const string ResourceName = "Resource-A";
private const string ValidationError1 = "You forgot to set the whizz bang flag.";
private const string ValidationError2 = "Wally cannot operate in zero gravity.";
private readonly List<string> validationErrors = new List<string>();
private const string Username = "Barry";
public UnitTests()
{
validationErrors.Add(ValidationError1);
validationErrors.Add(ValidationError2);
}
[TestMethod]
public void TestSerializableExceptionWithoutCustomProperties()
{
Exception ex =
new SerializableExceptionWithoutCustomProperties(
"Message", new Exception("Inner exception."));
// Save the full ToString() value, including the exception message and stack trace.
string exceptionToString = ex.ToString();
// Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
BinaryFormatter bf = new BinaryFormatter();
using (MemoryStream ms = new MemoryStream())
{
// "Save" object state
bf.Serialize(ms, ex);
// Re-use the same stream for de-serialization
ms.Seek(0, 0);
// Replace the original exception with de-serialized one
ex = (SerializableExceptionWithoutCustomProperties)bf.Deserialize(ms);
}
// Double-check that the exception message and stack trace (owned by the base Exception) are preserved
Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
}
[TestMethod]
public void TestSerializableExceptionWithCustomProperties()
{
SerializableExceptionWithCustomProperties ex =
new SerializableExceptionWithCustomProperties(Message, ResourceName, validationErrors);
// Sanity check: Make sure custom properties are set before serialization
Assert.AreEqual(Message, ex.Message, "Message");
Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
// Save the full ToString() value, including the exception message and stack trace.
string exceptionToString = ex.ToString();
// Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
BinaryFormatter bf = new BinaryFormatter();
using (MemoryStream ms = new MemoryStream())
{
// "Save" object state
bf.Serialize(ms, ex);
// Re-use the same stream for de-serialization
ms.Seek(0, 0);
// Replace the original exception with de-serialized one
ex = (SerializableExceptionWithCustomProperties)bf.Deserialize(ms);
}
// Make sure custom properties are preserved after serialization
Assert.AreEqual(Message, ex.Message, "Message");
Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
// Double-check that the exception message and stack trace (owned by the base Exception) are preserved
Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
}
[TestMethod]
public void TestDerivedSerializableExceptionWithAdditionalCustomProperty()
{
DerivedSerializableExceptionWithAdditionalCustomProperty ex =
new DerivedSerializableExceptionWithAdditionalCustomProperty(Message, Username, ResourceName, validationErrors);
// Sanity check: Make sure custom properties are set before serialization
Assert.AreEqual(Message, ex.Message, "Message");
Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
Assert.AreEqual(Username, ex.Username);
// Save the full ToString() value, including the exception message and stack trace.
string exceptionToString = ex.ToString();
// Round-trip the exception: Serialize and de-serialize with a BinaryFormatter
BinaryFormatter bf = new BinaryFormatter();
using (MemoryStream ms = new MemoryStream())
{
// "Save" object state
bf.Serialize(ms, ex);
// Re-use the same stream for de-serialization
ms.Seek(0, 0);
// Replace the original exception with de-serialized one
ex = (DerivedSerializableExceptionWithAdditionalCustomProperty)bf.Deserialize(ms);
}
// Make sure custom properties are preserved after serialization
Assert.AreEqual(Message, ex.Message, "Message");
Assert.AreEqual(ResourceName, ex.ResourceName, "ex.ResourceName");
Assert.AreEqual(2, ex.ValidationErrors.Count, "ex.ValidationErrors.Count");
Assert.AreEqual(ValidationError1, ex.ValidationErrors[0], "ex.ValidationErrors[0]");
Assert.AreEqual(ValidationError2, ex.ValidationErrors[1], "ex.ValidationErrors[1]");
Assert.AreEqual(Username, ex.Username);
// Double-check that the exception message and stack trace (owned by the base Exception) are preserved
Assert.AreEqual(exceptionToString, ex.ToString(), "ex.ToString()");
}
}
}
다른 팁
예외가 이미 직렬화,그러나 당신이 필요하여 재정의 GetObjectData
메서드를 저장할 변수를 생성자를 제공할 수 있는 호출될 때 수분의 개체입니다.
그래서 예 된다:
[Serializable]
public class MyException : Exception
{
private readonly string resourceName;
private readonly IList<string> validationErrors;
public MyException(string resourceName, IList<string> validationErrors)
{
this.resourceName = resourceName;
this.validationErrors = validationErrors;
}
public string ResourceName
{
get { return this.resourceName; }
}
public IList<string> ValidationErrors
{
get { return this.validationErrors; }
}
[SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter=true)]
protected MyException(SerializationInfo info, StreamingContext context) : base (info, context)
{
this.resourceName = info.GetString("MyException.ResourceName");
this.validationErrors = info.GetValue("MyException.ValidationErrors", typeof(IList<string>));
}
[SecurityPermissionAttribute(SecurityAction.Demand, SerializationFormatter=true)]
public override void GetObjectData(SerializationInfo info, StreamingContext context)
{
base.GetObjectData(info, context);
info.AddValue("MyException.ResourceName", this.ResourceName);
// Note: if "List<T>" isn't serializable you may need to work out another
// method of adding your list, this is just for show...
info.AddValue("MyException.ValidationErrors", this.ValidationErrors, typeof(IList<string>));
}
}
ISerializable 을 구현하고,그에 따라 정상적인 패턴 는 것입니다.
당신이 필요하는 태그는 클래스로[Serializable]특성과에 대한 지원을 추가하는 인터페이스,또한 추가 묵시적인 생성자(에서 설명하는 페이지 검색 을 의미한 생성자).당신이 볼 수 있습니다 예를 구현하는 코드의 아래에 텍스트입니다.
을 추가하여 올바른 답을 위에 내가 발견할 수 있는 일을 피 이용 직렬화면 저장 사용자 정의 속성에서 Data
컬렉션 의 Exception
클래스입니다.
E.g.:
[Serializable]
public class JsonReadException : Exception
{
// ...
public string JsonFilePath
{
get { return Data[@"_jsonFilePath"] as string; }
private set { Data[@"_jsonFilePath"] = value; }
}
public string Json
{
get { return Data[@"_json"] as string; }
private set { Data[@"_json"] = value; }
}
// ...
}
아마도 이것은 덜 효율의 관점에서보다 성능 제공하는 솔루션은 다니엘 아마만 작품에 대한"완전한"형식 문자열 및 정수과 같습니다.
아직 그것은 매우 쉽고 아주 이해할 수 있습니다.
있을 사용한 문서에서 Eric Gunnerson MSDN"잘 부드럽게 한 예외를"그러나 그것이었던 것 같습니다.The URL:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dncscol/html/csharp08162001.asp
Aydsman 의 대답은 올바른,더 많은 정보를 원하시면 여기:
http://msdn.microsoft.com/en-us/library/ms229064.aspx
나는 생각할 수 없다 모든 사용 사례를 위한 예외와 non-직렬화원,하지만 당신은 피하려고 시도 직렬화/직렬화에서 그들을 GetObjectData 및 직렬화 생성자 확인 해야 합니다.또한 그들과 함께[NonSerialized]특성으로 더 많은 설명서에서 무엇보다도 때문에,당신은 당신을 구현하기 직렬화 자신입니다.
클래스를 가진[Serializable]지만,나는 확실하지 않는 방법이 아니라 구성원 명령에 의해 처리됩니다 serializer.
편집
아래의 게시물이 정확하기 때문에,사용자 정의 예외를 정하는 체약국은,예외가 생성자는 매개변수를 구현해야 합니다 ISerializable.
사용한 경우 기본 생성자와 노출은 두 개의 사용자 정의 회원이터 구성,당신은 멀리 얻을 수 있으로 설정하는 특성이 있습니다.
내가 생각하는 것하고 싶은 직렬화하는 예외는 강력한 표시는 당신이 잘못된 접근 방식을 취하고 무언가이다.What's 궁극적인 목표,까요?당신이 통과 예외를 사이에 두 개의 프로세스,하나의 제품에 여러개의 실행의 동일한 프로세스의 대부분이 다른 특성의 예외는 없는 것에서 유효한 다른 프로세스 anyway.
그것은 아마 더 많은 의미를 추출하 상태 정보에 원하는 캐치()문,아카이브다.