Linux의 KBHIT () [및 getch ()]의 문제

Question

while(ch != 'q') 
{
  printf("looping\n");
  sleep(1);
  if(kbhit()) 
   {
    ch = readch();
    printf("you hit %c\n",ch);
   }
}

이 코드는 기능과 같은 차단 getch ()를 제공합니다. 이 코드를 사용하여 아래쪽 화살표 키를 캡처하려고합니다.

추가 :Up Arrow의 주요 코드를 캡처하려고 시도하면 3 숯 27, 91 및 65를 제공합니다. if/else를 사용하면 패턴 일치를 시도하지만 2 숯 만 얻습니다. 다음 키를 누르면 다음 키가 캡처됩니다.

항상 특정 키 (ESC, DEL 등)를 찾고있는 동안 GetChar ()를 사용하여 전체 단어를 캡처하고 싶습니다.

Answer 1

이 예는 다음과 같이 도움이 될 수 있습니다.

RAW.C- RAW 모드 데모

/* Raw mode demo */
/* See exactly what is being transmitted from the terminal. To do this
   we have to be more careful. */

#include <stdio.h>
#include <signal.h>
#include <termios.h>
#include <stdlib.h>
#include <unistd.h>

struct termios oldtermios;

int ttyraw(int fd)
{
    /* Set terminal mode as follows:
       Noncanonical mode - turn off ICANON.
       Turn off signal-generation (ISIG)
        including BREAK character (BRKINT).
       Turn off any possible preprocessing of input (IEXTEN).
       Turn ECHO mode off.
       Disable CR-to-NL mapping on input.
       Disable input parity detection (INPCK).
       Disable stripping of eighth bit on input (ISTRIP).
       Disable flow control (IXON).
       Use eight bit characters (CS8).
       Disable parity checking (PARENB).
       Disable any implementation-dependent output processing (OPOST).
       One byte at a time input (MIN=1, TIME=0).
    */
    struct termios newtermios;
    if(tcgetattr(fd, &oldtermios) < 0)
        return(-1);
    newtermios = oldtermios;

    newtermios.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG);
    /* OK, why IEXTEN? If IEXTEN is on, the DISCARD character
       is recognized and is not passed to the process. This 
       character causes output to be suspended until another
       DISCARD is received. The DSUSP character for job control,
       the LNEXT character that removes any special meaning of
       the following character, the REPRINT character, and some
       others are also in this category.
    */

    newtermios.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON);
    /* If an input character arrives with the wrong parity, then INPCK
       is checked. If this flag is set, then IGNPAR is checked
       to see if input bytes with parity errors should be ignored.
       If it shouldn't be ignored, then PARMRK determines what
       character sequence the process will actually see.

       When we turn off IXON, the start and stop characters can be read.
    */

    newtermios.c_cflag &= ~(CSIZE | PARENB);
    /* CSIZE is a mask that determines the number of bits per byte.
       PARENB enables parity checking on input and parity generation
       on output.
    */

    newtermios.c_cflag |= CS8;
    /* Set 8 bits per character. */

    newtermios.c_oflag &= ~(OPOST);
    /* This includes things like expanding tabs to spaces. */

    newtermios.c_cc[VMIN] = 1;
    newtermios.c_cc[VTIME] = 0;

    /* You tell me why TCSAFLUSH. */
    if(tcsetattr(fd, TCSAFLUSH, &newtermios) < 0)
        return(-1);
    return(0);
}

int ttyreset(int fd)
{
    if(tcsetattr(fd, TCSAFLUSH, &oldtermios) < 0)
        return(-1);

    return(0);
}

void sigcatch(int sig)
{
    ttyreset(0);
    exit(0);
}

int main()
{
    int i;
    char c;

    /* Catch the most popular signals. */
    if((int) signal(SIGINT,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }
    if((int)signal(SIGQUIT,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }
    if((int) signal(SIGTERM,sigcatch) < 0)
    {
        perror("signal");
        exit(1);
    }

    /* Set raw mode on stdin. */
    if(ttyraw(0) < 0)
    {
        fprintf(stderr,"Can't go to raw mode.\n");
        exit(1);
    }

    while( (i = read(0, &c, 1)) == 1)
    {
        if( (c &= 255) == 0177) /* ASCII DELETE */
            break;
        printf( "%o\n\r", c);
    }

    if(ttyreset(0) < 0)
    {
        fprintf(stderr, "Cannot reset terminal!\n");
        exit(-1);
    }

    if( i < 0)
    {
        fprintf(stderr,"Read error.\n");
        exit(-1);
    }

    return 0;
}

(데모를 중지하려는 백 스페이스, 기원)

Answer 2

나는 당신의 문제를 재현 할 수 없습니다 :

#include <unistd.h> 
#include <stdio.h> 
#include <ctype.h> 

#include "kbhit.h" /* http://linux-sxs.org/programming/kbhit.html */

int main(){
  init_keyboard();
  char ch='x';
  while( ch != 'q' ){
    printf("looping\n");
    sleep(1);
    if( kbhit() ){
      printf("you hit");
      do{
        ch = readch();
        printf(" '%c'(%i)", isprint(ch)?ch:'?', (int)ch );
      }while( kbhit() );
      puts("");
    }
  }
  close_keyboard();
}