Metric-FU/RCOV“분석 할 파일 없음”

Question

나는 내가 함께 일하고있는 Rails 프로젝트에서 메트릭 -Fu를 실행하려고 노력하고 있습니다. 내가 얻는 메트릭의 RCOV 부분을 실행할 때마다 :

** Invoke metrics:all (first_time)
** Execute metrics:all

No file to analyze was found. All the files loaded by rcov matched one of the
following expressions, and were thus ignored:
[/\A\/System\/Library\/Frameworks\/Ruby\.framework\/Versions\/1\.8\/usr\/lib/,
 /\btc_[^.]*.rb/,
 /_test\.rb\z/,
 /\btest\//,
 /\bvendor\//,
 /\A\/Library\/Ruby\/Gems\/1\.8\/gems\/rcov\-0\.9\.7\.1\/lib\/rcov\/formatters\/base_formatter\.rb\z/,
 /\bvendor\//,
 /\bconfig\//,
 /\benvironment\//,
 /\/gems\//,
 /\/Library\//,
 /spec/]

You can solve this by doing one or more of the following:
* rename the files not to be ignored so they don't match the above regexps
* use --include-file to give a list of patterns for files not to be ignored
* use --exclude-only to give the new list of regexps to match against
* structure your code as follows:
      test/test_*.rb  for the test cases
      lib/**/*.rb     for the target source code whose coverage you want
  making sure that the test/test_*.rb files are loading from lib/, e.g. by 
  using the -Ilib command-line argument, adding  
    $:.unshift File.join(File.dirname(__FILE__), "..", "lib")
  to test/test_*.rb, or running rcov via a Rakefile (read the RDoc
  documentation or README.rake in the source distribution).
rake aborted!
NaN
/Library/Ruby/Gems/1.8/gems/activesupport-2.3.3/lib/active_support/core_ext/float/rounding.rb:19:in `round_without_precision'
/Library/Ruby/Gems/1.8/gems/activesupport-2.3.3/lib/active_support/core_ext/float/rounding.rb:19:in `round'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/base/generator.rb:135:in `round_to_tenths'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/generators/rcov.rb:84:in `to_h'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/base/generator.rb:131:in `generate_report'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/base/generator.rb:53:in `generate_report'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/base/report.rb:54:in `add'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/../tasks/metric_fu.rake:6
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/../tasks/metric_fu.rake:6:in `each'
/Library/Ruby/Gems/1.8/gems/metric_fu-1.2.0/lib/../tasks/metric_fu.rake:6
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `call'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `execute'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `each'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `execute'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:in `invoke'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in `invoke_task'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `each'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:in `top_level'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in `run'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in `run'
/Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31
/usr/bin/rake:19:in `load'
/usr/bin/rake:19

RCOV 자체를 실행하면 같은 문제가 발생합니다. RSPEC을 사용하고 있고 도움이되는 경우 테스트 만합이 아닙니다.

Answer 1

레이크를 사용하여 metric_fu를 시작하는 경우이 스 니펫을 사용하여 RCOV 경로에 디렉토리를 추가 할 수 있습니다.

begin  
  require 'metric_fu'
  MetricFu::Configuration.run do |config|  
     config.rcov[:rcov_opts] << "-Ispec"  
  end 
rescue LoadError  
end

이것은 추가합니다 -Ispec 플래그에서 RCOV 옵션으로 '사양'디렉토리를 RCOV의 경로에 추가합니다.

Answer 2

"테스트"디렉토리를 제거하고 SPEC/SPEC_HELPER.RB를 포함하여 RCOV 구성 해시에 추가했습니다. SPEC 도우미를 구체적으로 지적해야한다고 생각하며 테스트 디렉토리를 제거해야합니다. 그렇지 않으면 RSPEC가 아닌 테스트 단위에서 RCOV를 실행하려고합니다.

이것이 다른 사람들을 돕기를 바랍니다!

Answer 3

따라서 RCOV는 "분석 할 파일이 발견되지 않았다"는 곳 에서이 작업을 수행합니다. 문제가 실제로 메시지 아래의 스택 추적 일 때 메시지. RCOV 버전을 업그레이드 할 수 있습니다 (어떤 버전에 있습니까?).