Вопрос
The chip is an Energy Micro EFM32380f1024 ARM microcontroller and I am using IAR ARM Embedded Workbench. I am aware of the __ramfunc directive however accomplishing initialising and accessing USB completely in RAM (as the flash is going to be completely erased) requires all USB libraries that will be used to be placed in RAM?
This will be used to upgrade the firmware on the microcontroller hence the flash erase. The USB is initialised and used (for normal use by the firmware) for serial communications. I do not wish to use the bootloader for firmware upgrades.
Решение
as the flash is going to be completely erased
Not a good idea. In case the update process fails to write the new program completely and the power is lost, your device will be bricked.
Using a bootloader is strongly recommended when you want the flash to be updatable by a user.
https://stackoverflow.com/questions/22581169
italiano
english
français
española
中国
日本の
العربية
Deutsch
한국어
Português
Russian